{"product_id":"teradek-bolt-1000-xt-sdi-hdmi-tx-2xrx-deluxe-set-v-mount","title":"Teradek Bolt 1000 XT SDI\/HDMI TX\/2xRX Deluxe Set V-Mount","description":"\u003cp\u003eThis \u003cstrong\u003eTeradek Bolt 1000 XT Deluxe Kit\u003c\/strong\u003e includes one transmitter and two receivers with installed V-mount, a panel array antenna, plus a variety of accessories. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero latency transmitter\/receiver pair features a 1000 feet line-of-site transmission distance when used together. You can send and receive visually lossless video signals from a Bolt 1000 transmitter with zero latency. The transmitter features a loop out SDI connector so you can feed your on camera monitor. The included panel array antenna is directional for improved signal reliability in one direction when compared to the performance of the included omni-directional antennas.\u003c\/p\u003e\u003cp\u003eThe receiver has a factory installed V-mount battery plate and features both an SDI and HDMI output. The system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, 480i and 576i and 480p and 576p are only available through the HDMI output. You can transmit up to two other Bolt 1000 or Sidekick II and 703 Bolt receivers as the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps to keep your transmitted video safe from prying eyes. Accessory arm and NATO mounts provide mounting options, and the SKB case protects your gear during transport and storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTeradek Bolt 1000 XT 3G-SDI\/HDMI Wireless Transmitter\u003c\/strong\u003e\u003cbr\u003e With the \u003cstrong\u003eTeradek Bolt 1000 XT 3G-SDI\/HDMI Wireless Transmitter\u003c\/strong\u003e you can transmit visually lossless 3G video signals to a Bolt 1000 receiver with zero latency. The Bolt XT is compatible with existing 3rd-generation Bolt systems, such as the Bolt 1000, Sidekick II, and 703 Bolt, as well as the Bolt 1000 LT. The transmitter unit itself can be secured to a camera or other SDI\/HDMI video source via a built-in 1\/4 inch -20 threaded hole, two M3 threaded holes, and a built-in 3\/8 inch -16 ARRI accessory mount. The included antennas provide a powerful signal that can travel up to 1000 feet line-of-sight.\u003c\/p\u003e\u003cp\u003eA shoe mount is included for attaching to cameras without 1\/4 inch -20 threads. For convenience, both a standard BNC cable and HDMI cable are included, so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector via the included D-Tap power cable. The transmitter supports up to four receivers, built-in AES 128 encryption protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Bolt 1000 XT and LT, Sidekick II, and 703 Bolt\u003c\/li\u003e\n\u003cli\u003eHDMI and 3G-SDI inputs, with 3G-SDI loop-through output on transmitter\u003c\/li\u003e\n\u003cli\u003e5 GHz Spectrum Analyser\u003c\/li\u003e\n\u003cli\u003eManual channel selection\u003c\/li\u003e\n\u003cli\u003eSupports 11 channels in the 40 MHz band\u003c\/li\u003e\n\u003cli\u003eSDI ancillary data support: supports metadata, timecode, and start\/stop flags from certain camera manufacturers.\u003c\/li\u003e\n\u003cli\u003e1\/4 inch -20 and M3 mounting points\u003c\/li\u003e \u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTeradek Bolt 1000 XT 3G-SDI\/HDMI Wireless Receiver\u003c\/strong\u003e\u003cbr\u003e With the \u003cstrong\u003eTeradek Bolt 1000 XT 3G-SDI\/HDMI Wireless Receiver\u003c\/strong\u003e you can receive visually lossless 3G video or HDMI signals from a Bolt 1000 transmitter with zero latency. The Bolt XT is compatible with the Sidekick II and the 703 Bolt, as well as the Bolt LT. The receiver unit itself can be secured via built-in 1\/4 inch -20 or M3 threaded holes.\u003c\/p\u003e\u003cp\u003eA light stand adaptor is included for mounting on stands. For convenience, a standard HDMI cable is included, so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector. A D-Tap power cable is included for attaching to a battery. The receiver can share the transmitter with up to three other receivers. It features built-in AES-128 encryption that protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals. The receiver features a built-in 3D LUT engine and a 5 GHz spectrum analyser so you can find a clean signal path.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBackward compatible with Bolt 1000 LT, Sidekick II, and 703 Bolt.\u003c\/li\u003e\n\u003cli\u003eThe receiver includes built-in cross conversion and Teradek's proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5 GHz spectrum analyser to help you find a clean signal pathway.\u003c\/li\u003e\n\u003cli\u003eOptional dual Gold mount or V-mount battery plate.\u003c\/li\u003e\n\u003cli\u003eSDI ancillary data support: supports metadata, timecode, and start\/stop flags from certain camera manufacturers.\u003c\/li\u003e\n\u003cli\u003eOLED screen with Menu Joystick Navigation.\u003c\/li\u003e\n\u003cli\u003e1\/4 inch -20 and M3 mounting points.\u003c\/li\u003e\n\u003cli\u003eFive included antennas for the receiver enable it to pick up signals with clarity.\u003c\/li\u003e \u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWooden Camera NATO Lock Kit\u003c\/strong\u003e\u003cbr\u003e Quickly secure and detach accessories from your camera rig by adding this \u003cstrong\u003eNATO Lock Kit\u003c\/strong\u003e from \u003cstrong\u003eWooden Camera\u003c\/strong\u003e. The rail attaches to your camera or cage system using the included 1\/4 inch -20 or 3\/8 inch -16 screws while the clamp attaches to the accessory itself via an additional set of 1\/4 inch -20 and 3\/8 inch -16 screws. The rail and clamp are compatible with other NATO standard accessories from RED, Zacuto, and other 3rd party manufacturers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTeradek Antenna Array for Bolt Receiver\u003c\/strong\u003e\u003cbr\u003e This \u003cstrong\u003eAntenna Array\u003c\/strong\u003e from \u003cstrong\u003eTeradek \u003c\/strong\u003eis a panel antenna designed to enhance wireless video transmission to Bolt receivers. This MIMO (Multiple In\/Multiple Out) antenna focuses the RF signal and reduces interference, producing a more resilient transmission. It offers a boost in reception but does not increase the maximum transmission range.\u003c\/p\u003e\u003cp\u003eThe panel array is composed of 3x16 dBi and 2x14 dBi antennas, and operates in the 5.1 to 5.8 GHz frequency range. The antenna comes with a mounting bracket, light stand adaptor, and five cables.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoosts wireless video transmission\u003c\/li\u003e\n\u003cli\u003eFocuses wireless signal and reduces interference\u003c\/li\u003e\n\u003cli\u003e5.1-5.8 GHz frequency range\u003c\/li\u003e\n\u003cli\u003eArray of 3x16 dBi and 2x14 dBi antennas\u003c\/li\u003e \u003c\/ul\u003e ","brand":"Teradek","offers":[{"title":"Default Title","offer_id":44579490005269,"sku":"10-1965-2V","price":14995.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/10-1965-2v.jpg?v=1680241653","url":"https:\/\/www.cameraelectronic.live\/products\/teradek-bolt-1000-xt-sdi-hdmi-tx-2xrx-deluxe-set-v-mount","provider":"Camera Electronic","version":"1.0","type":"link"}