{"title":"Audio -\u003e Monitoring -\u003e Production Consoles","description":"","products":[{"product_id":"blackmagic-design-atem-mini-pro-hdmi-live-stream-switcher","title":"Blackmagic Design ATEM Mini Pro HDMI Live Stream Switcher","description":"\u003cp\u003eSimilar to its predecessor, the ATEM Mini, the ATEM Mini Pro from Blackmagic Design is a four-input live production switcher with an integrated control panel designed for multicamera live streaming up to HD video to the internet or broadcast applications from gaming consoles, corporate computer streams, or HD cameras. Along with the software control update, the Mini Pro builds on the Mini with features such as live stream data rate and status information, a built-in hardware encoder, simultaneous recording to USB drives, drive hot swapping with the Blackmagic MultiDock, added record and stream buttons, stream caching, a timecode generator, program preview multiview, tally support, and support for Blackmagic Design Pocket Cinema Camera 6K and 4K to utilise as your broadcast sources.\u003c\/p\u003e\u003cp\u003eThe ATEM Mini Pro retains the same rear-panel setup on which four HDMI inputs are available on the rear of the chassis and they input up to 1080p HD video. There is also an HDMI output for a projector or multiview monitoring, a USB Type-C output as for recording HD video to a computer, and an RJ45 10\/100\/1000 Ethernet port for direct live streaming as well as system management, remote control, and upgrades. You can adjust frame rate depending on the quality of your stream, and there is no need for additional streaming software because the Pro includes a built-in hardware encoder.\u003c\/p\u003e\u003cp\u003eThe updated ATEM Software Control Panel is used for control and configuration of the ATEM Mini Pro via USB or Ethernet, and it allows you to monitor the data rate, audio meters, configuration, and status of your live feed. The built-in colour control panel has the same configuration of DaVinci Resolve, eliminating any learning curve. Advanced features include the ability for engineers to upload an XML configuration file to make it easier to change all your settings at once.\u003c\/p\u003e\u003cp\u003eThe control surface features the same easy-to-view, backlit control buttons to enable selecting camera inputs, controlling transitions, keyers, settings, and the DVE. The ATEM Mini Pro adds several buttons to the right side such as a quick record button, which allows you to instantly record your live stream to the connected USB source, or by holding it down, you can hot-swap drives when using the Blackmagic MultiDock if you need to quickly get down to editing. On Air and Stream buttons have also been added to instantly start and stop your stream once it is set up in software control. The added Video Out buttons on the right side allow you to select a program preview for each source, so you can make sure each source is ready to go for air.\u003c\/p\u003e\u003cp\u003eThe ATEM Mini Pro features the same upstream and downstream keyers, an advanced chroma keyer, two linear\/luma keyers, a DVE transition keyer, a pattern generator, and colour generators. There is also media player support for fill and key images, which supports up to 20 stills in PNG, TGA, BMP, JPEG, and TIFF formats.\u003c\/p\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":44578755870997,"sku":"SWATEMMINIBPR","price":475.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/swatemminibpr.jpg?v=1680224712"},{"product_id":"blackmagic-design-atem-mini-pro-iso-hdmi-live-stream-switcher","title":"Blackmagic Design ATEM Mini Pro ISO HDMI Live Stream Switcher","description":"\u003cp\u003eSimilar to its predecessor, the ATEM\u003cstrong\u003e \u003c\/strong\u003eMini, the \u003cstrong\u003eATEM Mini Pro \u003c\/strong\u003efrom \u003cstrong\u003eBlackmagic Design\u003c\/strong\u003e is a four-input live production switcher with an integrated control panel designed for multicamera live streaming up to HD video to the internet or broadcast applications from gaming consoles, corporate computer streams, or HD cameras. Along with the software control update, the Mini Pro builds on the Mini with features such as live stream data rate and status information, a built-in hardware encoder, simultaneous recording to USB drives, drive hot swapping with the Blackmagic MultiDock, added record and stream buttons, stream caching, a timecode generator, program preview multiview, tally support, and support for Blackmagic Design Pocket Cinema Camera 6K and 4K to utilise as your broadcast sources.\u003c\/p\u003e\u003cp\u003eThe ATEM Mini Pro retains the same rear-panel setup on which four HDMI inputs are available on the rear of the chassis and they input up to 1080p HD video. There is also an HDMI output for a projector or multiview monitoring, a USB Type-C output as for recording HD video to a computer, and an RJ45 10\/100\/1000 Ethernet port for direct live streaming as well as system management, remote control, and upgrades. You can adjust frame rate depending on the quality of your stream, and there is no need for additional streaming software because the Pro includes a built-in hardware encoder.\u003c\/p\u003e\u003cp\u003eThe updated ATEM Software Control Panel is used for control and configuration of the ATEM Mini Pro via USB or Ethernet, and it allows you to monitor the data rate, audio meters, configuration, and status of your live feed. The built-in colour control panel has the same configuration of DaVinci Resolve, eliminating any learning curve. Advanced features include the ability for engineers to upload an XML configuration file to make it easier to change all your settings at once.\u003c\/p\u003e\u003cp\u003eThe control surface features the same easy-to-view, backlit control buttons to enable selecting camera inputs, controlling transitions, keyers, settings, and the DVE. The ATEM Mini Pro adds several buttons to the right side such as a quick record button, which allows you to instantly record your live stream to the connected USB source, or by holding it down, you can hot-swap drives when using the Blackmagic MultiDock if you need to quickly get down to editing. On Air and Stream buttons have also been added to instantly start and stop your stream once it is set up in software control. The added Video Out buttons on the right side allow you to select a program preview for each source, so you can make sure each source is ready to go for air.\u003c\/p\u003e\u003cp\u003eThe ATEM Mini Pro features the same upstream and downstream keyers, an advanced chroma keyer, two linear\/luma keyers, a DVE transition keyer, a pattern generator, and colour generators. There is also media player support for fill and key images, which supports up to 20 stills in PNG, TGA, BMP, JPEG, and TIFF formats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSame rear panel as ATEM Mini with added buttons and software features\u003c\/li\u003e\n\u003cli\u003eStream video up to 1080p HD\u003c\/li\u003e\n\u003cli\u003eQuick stream, on-air and record buttons\u003c\/li\u003e\n\u003cli\u003eHardware encoder so there's no need for additional streaming software\u003c\/li\u003e\n\u003cli\u003eControl and configure timecode, stream status\u003c\/li\u003e\n\u003cli\u003eFull support and control features for BMPCC 6K and 4K cameras\u003c\/li\u003e\n\u003cli\u003eSimultaneous USB recording\u003c\/li\u003e\n\u003cli\u003eIntegration with MultiDock for live hard drive switching\u003c\/li\u003e\n\u003cli\u003eCustomise advanced settings with XML files\u003c\/li\u003e\n\u003cli\u003eSoftware multiview with program previews, graphics, record status, on air status, audio meters\u003c\/li\u003e\n\u003cli\u003eProgram preview input and output buttons\u003c\/li\u003e\n\u003cli\u003eTally light control for BMPCC 6K\/4K cameras\u003c\/li\u003e\n\u003cli\u003eAutomatic timecode sync for all cameras\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTransitions\u003c\/strong\u003e\u003cbr\u003eAvailable transitions include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCut: when you press the cut button, ATEM instantly changes from your current program source to the preview source. Cuts can be performed by directly selecting sources or by pressing the cut button to switch to the next source.\u003c\/li\u003e\n\u003cli\u003eMix: the mix, or dissolve, gradually transitions from one source to the next by creating a smooth blend. You can set custom timings to manually blend the transition.\u003c\/li\u003e\n\u003cli\u003eDip: just like mix transitions, a dip transition is a gradual blend that includes either a solid colour, graphic, or another clip between the two video sources. Dips to black or white between sources are the most popular, or you can use logos or sponsor graphics.\u003c\/li\u003e\n\u003cli\u003eWipe: built-in wipe patterns include circles, diamonds, squares, and more. Shapes and patterns can be inverted or softened and can even have customised coloured borders.\u003c\/li\u003e\n\u003cli\u003eDVE: with the powerful built-in Digital Video Effects processor, or DVE, you can push, spin, squeeze, or swoosh your live video from one camera to the next with incredible built-in transitions. DVE transitions can be flip-flopped and reversed, giving you even more transition options.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eUpstream Keyer\u003c\/strong\u003e\u003cbr\u003eLayer live video over other video sources or graphics with the Upstream Keyer. You can use luma key, linear key, pattern key, or shoot against a green screen and use chroma key to instantly composite the video over virtual sets.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLuma key: luma keys work best with high-contrast images, like white elements on a black background, so you can use the contrast to cut the black background and replace it with live video or graphics.\u003c\/li\u003e\n\u003cli\u003eLinear key: get clean, high-quality results with linear keying by using two separate sources for the fill and the key to create one video image. The fill signal contains the video to be stacked over the background, while the key signal contains a gray scale mask to cut out, or mask, the area to be filled.\u003c\/li\u003e\n\u003cli\u003eChroma key: used every day for TV weather forecasts, chroma keys are a powerful way of combining live images in real time. The presenter typically stands in front of a green or blue background and the chroma keyer will remove only that colour and combine it with another image, such as a video or graphic.\u003c\/li\u003e\n\u003cli\u003ePattern key: combine live images with any of the built-in wipe patterns to combine live images or graphics with geometric shapes. You get full control over softness, symmetry, size, and position to create unique picture-in-picture effects that can be transitioned to as easily as any live source.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eDownstream Keyers\u003c\/strong\u003e\u003cbr\u003eThe ATEM Mini switcher includes one downstream keyer, so you can add high-quality graphics like logos, bugs, and titles from the built-in media player over the live stream program output. Downstream keyers are the last layers of keying, so they overlay all video switched to the main program output.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAudio Mixer\u003c\/strong\u003e\u003cbr\u003eThe built-in audio mixer lets you control both camera and external audio with precision level and balance adjustments on all six available audio inputs and two channels. The mixer features selectable On\/Off\/Audio-Follow-Video per channel, plus it has separate gain control per channel, level and peak metering, and new Fairlight audio enhancements such as compressor, gate, limiter, six bands of parametric EQ, and master gain control.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonitor Output\u003c\/strong\u003e\u003cbr\u003eThe HDMI monitor output allows you to see your sources, graphics, preview, and program output on a single screen.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMedia Player\u003c\/strong\u003e\u003cbr\u003eEliminate external character generators by storing up to 20 broadcast-quality RGBA graphic files in the media pool. The one media player appears as input sources to your switcher. You can transition to graphics as full-frame video, or feed them to the keyers for overlaying video. Popular image formats such as PNG, TGA, BMP, GIF, JPEG, and TIFF are supported.\u003c\/p\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":44578756034837,"sku":"SWATEMMINIBPRISO","price":795.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/swatemminibpriso.jpg?v=1680224721"},{"product_id":"blackmagic-design-atem-mini-extreme","title":"Blackmagic Design ATEM Mini Extreme","description":"\u003cp\u003eThe \u003cstrong\u003eBlackmagic Design ATEM Mini Extreme\u003c\/strong\u003e is an 8-input live production switcher for live streaming. It features an integrated control panel and has advanced broadcast features. In addition to live streaming using RTMP protocols, you can also output your program as if it was a webcam over USB. This versatile switcher's eight independent HDMI inputs accept all popular HD signals up to 1080p60. Each input has discrete frame rate and format converters, and it supports re-syncing for seamless switching between a variety of pro and consumer cameras, game consoles, and computer feeds.\u003c\/p\u003e\r\n\u003cp\u003eSwitch, add effects, color grade, and key in real time using the control surface's buttons, or via the software control panel. CCU functions are available for controlling Blackmagic Studio and URSA Mini\/Broadcast\/Micro Studio cameras from the switcher. The ATEM Mini Extreme supports up to nine layers, with four upstream and two downstream keyers, up to four chroma keyers, up to four linear keyers, two DVE with borders and drop shadow, five pattern generators, and two color generators. Designed for live streaming or webcam production, the Mini Extreme has HDMI outputs to feed monitors and supports up to 16-screen multiview.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStream Live\u003c\/strong\u003e\u003cbr\u003eLive stream to YouTube, Facebook Live, Skype, Twitch, Zoom, Microsoft Teams, and other platforms that support RTMP protocols.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControl Interface\u003c\/strong\u003e\u003cbr\u003eThe front panel includes easy-to-use buttons for selecting sources, video effects, and transitions. The source buttons are large, allowing you to operate them by feel. Included on the ATEM Extreme are buttons for audio mixing, recording, and streaming control, as well as output selection buttons that let you change the video output between cameras, program, and multiview. On the rear panel, there are HDMI connections for cameras or computers, extra microphone inputs, USB for webcam out, plus an HDMI \"AUX\" output for program video.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003cbr\u003eYou can output using the Ethernet connection to your network or use the USB Type-C output to have your switched show recognised as a webcam input by virtually any video software such as Zoom, Microsoft Teams, Skype, Open Broadcaster, XSplit Broadcaster, and others.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4G and 5G Phone Support\u003c\/strong\u003e\u003cbr\u003eIf you're doing live production on location, the ATEM Mini Extreme models support connecting an Apple or Android phone to the USB port to use mobile data. It's also a great backup for the main Ethernet connection, so you don't drop your stream if your hardwired connection gets interrupted. The switcher will automatically switch to using the phone as the primary connection, and the USB port will also power your phone, so the battery won't drain.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMultiview Monitoring\u003c\/strong\u003e\u003cbr\u003eYou can configure the HDMI output for multiview with 4, 7, 10, 13, up to 16 views including Program, Preview, eight HDMI inputs, SuperSource, clean feed, media player, streaming status, recording status, and audio meters.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCamera Control\u003c\/strong\u003e\u003cbr\u003eThe ATEM Mini Extreme can control the Blackmagic Pocket Cinema Camera 4K and 6K models when they are updated to the latest software and plugged in via the HDMI inputs. You can control your HDMI camera settings such as iris, gain, focus, detail, and zoom control on compatible lenses. Plus, you can color balance cameras, as well as create unique looks using the DaVinci Resolve primary colour corrector built into the Blackmagic Pocket Cinema Camera 4K and 6K.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMedia Pool\u003c\/strong\u003e\u003cbr\u003eThe switcher can store up to 20 images with fill and key, and it supports PNG, TGA, BMP, GIF, JPEG, and TIFF file formats.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003eIt includes the ATEM Software Control Panel, and it is also compatible with the ATEM 1 M\/E, ATEM 2 M\/E, and ATEM 4 M\/E Advanced Panels. The ATEM Mini Extreme can be configured using Blackmagic's Videohub Hardware Panel Setup utility to route sources to destinations using Videohub Smart Control Pro and Videohub Master Control Pro.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRecording\u003c\/strong\u003e\u003cbr\u003eThe ATEM Mini Extreme models support the direct recording of your streaming data to USB flash disks using the same H.264 video files with AAC audio that you streamed. Recording to multiple disks is also supported via a USB hub or the Blackmagic MultiDock, so when a disk becomes full, recording can continue to a second disk for nonstop recording. Record settings and disk selection are set up in ATEM Software Control, and there's a record status view in the built-in multiview. You can even trigger recording on connected Blackmagic Pocket Cinema Cameras.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVideo Effects\u003c\/strong\u003e\u003cbr\u003eOne of the benefits of ATEM Mini is the professional production values possible using the range of built-in video effects. The cut button ensures an instant cut when switching between sources. The auto button is a professional term used on large broadcast switchers to enable video effect transitions. There are duration buttons for video effects allowing 0.5-, 1-, 1.5-, and 2-second settings. You can also select the type of effect you want including mix, which does a smooth transition between sources, and dip, which fades via a colour during the transition. Or use fun DVE effects that move the image off-screen when transitioning between sources.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAudio\u003c\/strong\u003e\u003cbr\u003eWith two independent 3.5mm stereo audio inputs, you can connect desktop and lapel microphones, or you can connect a music player to generate introduction music after the live stream commences but before the program starts. With two extra stereo audio inputs, you can ensure a host and guest both have lapel microphones when doing interviews. All audio inputs to the ATEM Mini include buttons on the panel for adjusting audio level and enabling inputs into the audio mixer. All models feature a Fairlight audio mixer with all HDMI inputs, and both microphone inputs are connected to the audio mixer, so you can live mix from all audio sources. The ATEM Mini Extreme also adds a headphone output.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBroadcast Features\u003c\/strong\u003e\u003cbr\u003eHiding in the ATEM Mini Extreme models are a host of broadcast-calibre features that are accessible when connected to a Mac or Windows computer running the free ATEM Software Control app.\u003c\/p\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":44580084351253,"sku":"SWATEMMINICEXT","price":1695.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/3_207_28.jpg?v=1680255773"},{"product_id":"blackmagic-design-atem-mini-extreme-iso","title":"Blackmagic Design ATEM Mini Extreme ISO","description":"\u003cp\u003eThe \u003cstrong\u003eBlackmagic Design ATEM Mini Extreme ISO \u003c\/strong\u003eis an 8-input live production switcher for live streaming. It features an integrated control panel and has advanced broadcast features. In addition to live streaming using RTMP protocols, you can also output your program as if it was a webcam over USB. The switcher's ISO label means you can individually record each of the eight input videos as an MP4, as well as the program output via one of the USB Type-C ports. The switcher automatically generates a DaVinci Resolve project file, so you can clean it up and make changes later. This versatile switcher's eight independent HDMI inputs accept all popular HD signals up to 1080p60. Each input has discrete frame rate and format converters, and it supports re-syncing for seamless switching between a variety of pro and consumer cameras, game consoles, and computer feeds.\u003c\/p\u003e\r\n\u003cp\u003eSwitch, add effects, color grade, and key in real time using the control surface's buttons, or via the software control panel. CCU functions are available for controlling Blackmagic Studio and URSA Mini\/Broadcast\/Micro Studio cameras from the switcher. The ATEM Mini Extreme ISO supports up to nine layers, with four upstream and two downstream keyers, up to four chroma keyers, up to four linear keyers, two DVE with borders and drop shadow, five pattern generators, and two colour generators. Designed for live streaming or webcam, the Mini Extreme ISO has HDMI outputs to feed monitors and supports up to 16-screen multiview.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStream Live\u003c\/strong\u003e\u003cbr\u003eLive stream to YouTube, Facebook Live, Skype, Twitch, Zoom, Microsoft Teams, and other platforms that support RTMP protocols.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControl Interface\u003c\/strong\u003e\u003cbr\u003eThe front panel includes easy-to-use buttons for selecting sources, video effects, and transitions. The source buttons are large, allowing you to operate them by feel. Included on the ATEM Extreme ISO are buttons for audio mixing, recording, and streaming control, as well as output selection buttons that let you change the video output between cameras, program, and multiview. On the rear panel, there are HDMI connections for cameras or computers, extra microphone inputs, USB for webcam out, plus an HDMI \"AUX\" output for program video.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003cbr\u003eYou can output using the Ethernet connection to your network or use the USB Type-C output to have your switched show recognised as a webcam input by virtually any video software such as Zoom, Microsoft Teams, Skype, Open Broadcaster, XSplit Broadcaster, and others.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4G and 5G Phone Support\u003c\/strong\u003e\u003cbr\u003eIf you're doing live production on location, the ATEM Mini Extreme models support connecting an Apple or Android phone to the USB port to use mobile data. It's also a great backup for the main Ethernet connection, so you don't drop your stream if your hardwired connection gets interrupted. The switcher will automatically switch to using the phone as the primary connection, and the USB port will also power your phone, so the battery won't drain.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMultiview Monitoring\u003c\/strong\u003e\u003cbr\u003eYou can configure the HDMI output for multiview with 4, 7, 10, 13, up to 16 views including Program, Preview, eight HDMI inputs, SuperSource, clean feed, media player, streaming status, recording status, and audio meters.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCamera Control\u003c\/strong\u003e\u003cbr\u003eThe ATEM Mini Extreme ISO can control the Blackmagic Pocket Cinema Camera 4K and 6K models when they are updated to the latest software and plugged in via the HDMI inputs. You can control your HDMI camera settings such as iris, gain, focus, detail, and zoom control on compatible lenses. Plus, you can colour balance cameras, as well as create unique looks using the DaVinci Resolve primary colour corrector built into the Blackmagic Pocket Cinema Camera 4K and 6K.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMedia Pool\u003c\/strong\u003e\u003cbr\u003eThe switcher can store up to 20 images with fill and key, and it supports PNG, TGA, BMP, GIF, JPEG, and TIFF file formats.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003eIt includes the ATEM Software Control Panel, and it is also compatible with the ATEM 1 M\/E, ATEM 2 M\/E, and ATEM 4 M\/E Advanced Panels. The ATEM Mini Extreme ISO can be configured using Blackmagic's Videohub Hardware Panel Setup utility to route sources to destinations using Videohub Smart Control Pro and Videohub Master Control Pro.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRecording\u003c\/strong\u003e\u003cbr\u003eThe ATEM Mini Extreme models support the direct recording of your streaming data to USB flash disks using the same H.264 video files with AAC audio that you streamed. The Mini Extreme ISO also allows you to record the eight input video channels as MP4 files. This allows you to directly upload to any online video site, such as YouTube or Vimeo. Recording to multiple disks is also supported via a USB hub or the Blackmagic MultiDock, so when a disk becomes full, recording can continue to a second disk for nonstop recording. Record settings and disk selection are set up in ATEM Software Control, and there's a record status view in the built-in multiview. You can even trigger recording on connected Blackmagic Pocket Cinema Cameras.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDaVinci Resolve Integration\u003c\/strong\u003e\u003cbr\u003eThe Mini Extreme ISO saves a DaVinci Resolve project file, so with a single click, you can open your live production as a video edit. All cuts, dissolves, and media pool graphics will be loaded, allowing you to tweak and edit your live production using the recorded input footage. If you recorded the camera originals as Blackmagic Raw camera files, you can relink those and take advantage of DaVinci Resolve's colour correction abilities.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVideo Effects\u003c\/strong\u003e\u003cbr\u003eOne of the benefits of ATEM Mini is the professional production values possible using the range of built-in video effects. The cut button ensures an instant cut when switching between sources. The auto button is a professional term used on large broadcast switchers to enable video effect transitions. There are duration buttons for video effects allowing 0.5-, 1-, 1.5-, and 2-second settings. You can also select the type of effect you want including mix, which does a smooth transition between sources, and dip, which fades via a colour during the transition. Or use fun DVE effects that move the image off-screen when transitioning between sources.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAudio\u003c\/strong\u003e\u003cbr\u003eWith two independent 3.5mm stereo audio inputs, you can connect desktop and lapel microphones, or you can connect a music player to generate introduction music after the live stream commences but before the program starts. With two extra stereo audio inputs, you can ensure a host and guest both have lapel microphones when doing interviews. All audio inputs to the ATEM Mini include buttons on the panel for adjusting audio level and enabling inputs into the audio mixer. All models feature a Fairlight audio mixer with all HDMI inputs, and both microphone inputs are all connected to the audio mixer, so you can live mix from all audio sources. The ATEM Mini Extreme also adds a headphone output.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBroadcast Features\u003c\/strong\u003e\u003cbr\u003eHiding in the ATEM Mini Extreme models are a host of broadcast-calibre features that are accessible when connected to a Mac or Windows computer running the free ATEM Software Control app.\u003c\/p\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":44580084547861,"sku":"SWATEMMINICEXTISO","price":2035.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/3_207_29.jpg?v=1680255784"},{"product_id":"yolobox-pro-portable-multi-camera-encoder-streamer-switcher-monitor-recorder","title":"YoloBox Pro Portable Multi-Camera Encoder\/Streamer\/Switcher\/Monitor\/Recorder","description":"\u003cp\u003eCreate a live stream production from anywhere with the ultra-portable YoloBox Pro Portable Multi-Camera Encoder\/Streamer\/Switcher\/Monitor\/Recorder from YoloLiv. The YoloBox Pro can simultaneously broadcast up to three video streams via Wi-Fi, RJ45 Ethernet, or via 4G LTE with a separately available SIM card and subscription. The YoloBox Pro features multiple updates from the original YoloBox, including HDCP compliance, both mic and line analog audio inputs, a USB input, three HDMI inputs, a Qualcomm 660 encoder\/processor, a high-capacity 10,000mAh internal battery, and a larger 8\" LCD touchscreen display with 400 cd\/m² brightness.\u003c\/p\u003e\r\n\u003cp\u003eThe YoloBox Pro allows you to connect and live switch up to 8 video sources, and then connect to a local area network via Wi-Fi, Ethernet, or LTE (LTE connection requires SIM card and data plan not included). The large 8\" touchscreen display shows the streaming image, the input streams as well as the control interface, which allows you to switch between the info sources with a touch. It also features an HDMI output to display your stream locally on an optional HDMI display. It also has a line-level audio input, a mic-level audio input, and a discrete headphone audio out.\u003c\/p\u003e\r\n\u003cp\u003eThe YoloBox Pro supports input resolutions ranging up to 1080p using the H.264 codec, and you can stream resolutions from 540p to 1080p to YouTube, Twitch, and other streaming services via custom RTMP presets. Stream to the Internet using a 4G cellular network such as Verizon, T-Mobile, and AT\u0026amp;T, using a separately available nano-size SIM card and a separately available data plan. You can record your stream directly in .mp4 format to an optional SD card with up to 128 GB capacity using the built-in SD card slot.\u003c\/p\u003e\r\n\u003cp\u003eLatest Firmware 1.06 Update\u003c\/p\u003e\r\n\u003cp\u003eAs of the latest firmware update:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSupport two videos from SD card: Users can now add a total of 3 sources (2 videos and 1 PDF) from the SD card, and a total of 8 video sources (3 HDMI + 1 USB-A + 1 USB-C + 2 SD Card Videos + 1 PDF)\u003c\/li\u003e\r\n\u003cli\u003eScoreboard Countdown Timer: You can easily create a timer or reset it whenever you want with just one tap. The longest time period supported is 100 minutes, satisfying various live streaming scenarios and taking your live production to a new level of flexibility.\u003c\/li\u003e\r\n\u003cli\u003eCharacter limits for rolling captions removed: Even if you live stream a music festival with all lyrics displayed, there won't be a problem.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eLatest Firmware 1.04 Update\u003c\/p\u003e\r\n\u003cp\u003eAs of the latest firmware update:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSelect encoding options including CBR, VBR, CQ\u003c\/li\u003e\r\n\u003cli\u003eBuilt-In Chroma Key is available on YoloBox Pro\u003c\/li\u003e\r\n\u003cli\u003eStandard bug fixes and performance improvements\u003c\/li\u003e\r\n\u003cli\u003eCustomize your graphic overlays, including editing the fonts, colors, and background colors of your lower-thirds, scoreboard, and rolling captions\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eKey Features\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTouch control without a computer\u003c\/li\u003e\r\n\u003cli\u003e8\" LCD display with 400 cd\/m² brightness\u003c\/li\u003e\r\n\u003cli\u003eBuilt-in simultaneoulsy streaming to up to 3 destinations\u003c\/li\u003e\r\n\u003cli\u003eHDCP compliant\u003c\/li\u003e\r\n\u003cli\u003eStream via Ethernet, Wi-Fi, LTE 4G\u003c\/li\u003e\r\n\u003cli\u003eLive switch up to 8 sources\u003c\/li\u003e\r\n\u003cli\u003e3 x HDMI inputs, 1 x USB video input, 1 x SD card slot, 1 x HDMI output\u003c\/li\u003e\r\n\u003cli\u003eOne USB Type-C charging input\u003c\/li\u003e\r\n\u003cli\u003eMic and Line audio input, 1 x audio output\u003c\/li\u003e\r\n\u003cli\u003eAbility to input PDF \u003c\/li\u003e\r\n\u003cli\u003eAdd logos\/comments to the stream\u003c\/li\u003e\r\n\u003cli\u003eImport pictures\/videos from SD card\u003c\/li\u003e\r\n\u003cli\u003eRecords internally to SD card up to 128GB\u003c\/li\u003e\r\n\u003cli\u003eDirect integration with YouTube\/Facebook\/RTMP(s)\u003c\/li\u003e\r\n\u003cli\u003eSupports up to 1080p60 video\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eTouchscreen Control\u003c\/p\u003e\r\n\u003cp\u003eThe YoloBox Pro provides you with a large touchscreen interface for easy streaming and control.\u003c\/p\u003e\r\n\u003cp\u003eFunctions\u003c\/p\u003e\r\n\u003cp\u003eThe device works as a switcher, with a variety of picture-in-picture templates as well as graphic layers. It has a built-in encoder that allows for live streaming, and it can record to optional SD cards up to 128GB.\u003c\/p\u003e\r\n\u003cp\u003eOverlays\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eYou can brand your live stream by adding logos\/watermarks\/rolling captions\u003c\/li\u003e\r\n\u003cli\u003eCustomized PiP options, including Interview mode, allow you to bring a unique look and feel to your stream\u003c\/li\u003e\r\n\u003cli\u003eEngage with your audience in real time via feature comment overlays\u003c\/li\u003e\r\n\u003cli\u003eThe customizable scoreboard feature displays a real-time-controlled scoreboard for professional looking results\u003c\/li\u003e\r\n\u003cli\u003eBuilt-in lower-thirds templates can be edited or you can add your own\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eInternet\u003c\/p\u003e\r\n\u003cp\u003eYou can connect to the internet using the integrated RJ45 (Ethernet) port, Wi-Fi, and via cell service using an optional SIM card.\u003c\/p\u003e\r\n\u003cp\u003eSimultaneous Streaming\u003c\/p\u003e\r\n\u003cp\u003eYoloBox Pro will first push your feed to the YoloLIV platform, from where it automatically forward your feed to a maximum of 3 destinations simultaneously.\u003cbr\u003eNote:Please note that at times a streaming service may change their policies, which will cause issues with integration; this is usually a temporary situation.\u003c\/p\u003e\r\n\u003cp\u003eStreaming Platforms\u003c\/p\u003e\r\n\u003cp\u003eMajor steaming platforms such as Facebook live, YouTube, and twitch as well as YoloLIV are supported.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRTMP protocols allow you to stream to custom RTMP destinations including YouTube.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eSD Card Input\u003cbr\u003eRoll in pre-recorded videos for intro, countdown, B-roll, or special segments from an SD media card.\u003c\/p\u003e\r\n\u003cp\u003ePDF\u003cbr\u003eYou can load a PDF as a local source to your YoloBox.\u003c\/p\u003e\r\n\u003cp\u003eBattery Life\u003c\/p\u003e\r\n\u003cp\u003eThe internal 10,000mAh battery can power your YoloBox Pro for approximately 3 hours. The YoloBox Pro charges via a USB Type-C input, which is used for power only.\u003c\/p\u003e","brand":"YoloBox","offers":[{"title":"Default Title","offer_id":44580679516437,"sku":"YOLOBOXPRO","price":1799.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1625045467_img_1562074.jpg?v=1680272370"},{"product_id":"blackmagic-design-atem-constellation-8k","title":"Blackmagic Design ATEM Constellation 8K","description":"\u003cp\u003eThe \u003cstrong\u003eBlackmagic Design ATEM Constellation 8K \u003c\/strong\u003eis a powerful switcher in a 2 RU chassis that can easily handle 4K video and supports 8K. It features a built-in control panel on the front and 40 12G-SDI inputs, with two main and 24 AUX 12G-SDI outputs. Each input has its own standards converter, which allows you to seamlessly switch between inputs no matter what format it is. The Constellation 8K incorporates four DVE, 16 Keyers, and four media players, allowing for flexibility in creating your program. Four multiview outputs enable viewing 4, 7, 10, 13, or 16 simultaneous views.\u003c\/p\u003e\r\n\u003cp\u003eThe relatively large LCD view screen on the front of the unit displays the input video with a label of the input number. You can control the Constellation 8K locally via the front panel buttons, or you can use the built-in Ethernet connector to control the system from a computer using the included control panel software. The built-in Fairlight audio mixer supports 80 channels of de-embedded audio from SDI, plus 64 channels via MADI in. Talkback functionality is available via the 5-pin XLR on the front of the unit, or the RJ12 connector on the back.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eGeneral\u003c\/strong\u003e\u003cbr\u003eThe ATEM Constellation 8K features the following built-in capabilities:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16 upstream keyers in Ultra HD, 4 in 8K supporting chroma, linear, and luma keying\u003c\/li\u003e\r\n\u003cli\u003e4 downstream keyers in Ultra HD, 2 in 8K.\u003c\/li\u003e\r\n\u003cli\u003e16 advanced chroma keyers in Ultra HD, 4 in 8K\u003c\/li\u003e\r\n\u003cli\u003eTalkback communication is supported\u003c\/li\u003e\r\n\u003cli\u003eMix-minus is supported\u003c\/li\u003e\r\n\u003cli\u003eThere are 4 transition keyers (Stinger\/DVE)\u003c\/li\u003e\r\n\u003cli\u003eSupports up to 28 layers in UHD and 7 layers in 8K\u003c\/li\u003e\r\n\u003cli\u003e21 pattern generators are available in Ultra HD, while only 9 are available in 8K\u003c\/li\u003e\r\n\u003cli\u003eSupport for 2 color generators\u003c\/li\u003e\r\n\u003cli\u003e4 DVE with 3D borders and drop shadow are supported in Ultra HD; one is supported in 8K\u003c\/li\u003e\r\n\u003cli\u003eControl is via front push-button switching with illuminated buttons, software, or an optional hardware panel.\u003c\/li\u003e\r\n\u003cli\u003e64 routable windows in Ultra HD, and 16 in 8K\u003c\/li\u003e\r\n\u003cli\u003eTally support (red for program, green for preview)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eATEM Software Control Panel\u003c\/strong\u003e\u003cbr\u003eThe included ATEM Software Control Panel provides control over the switcher. Featuring a well-designed interface with a visual switcher and parameter palettes for making quick adjustments, the ATEM Software Control also lets you access camera control, audio mixing, media, macro programming, and even control of HyperDeck disk recorders.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBuilt-In Fairlight Audio Mixer\u003c\/strong\u003e\u003cbr\u003eThe ATEM Constellation features a built-in Fairlight audio mixer that makes it possible to do extremely complex live sound mixing. The internal mixer supports up to 156 channels. Eighty mixer channels are de-embedded from the SDI inputs, and each input channel features a high-quality 6-band parametric EQ and compressor, limiter, expander, and noise gate, as well as full panning. Extra channels for the analog input, talkback microphone, and media players are supported as well, and the audio mixing features can be controlled via the ATEM Software Control, a Mackie-compatible panel, or Fairlight Audio Console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAdvanced Keyers\u003c\/strong\u003e\u003cbr\u003eThe ATEM Constellation 8K features 16 ATEM Advanced Keyers for high-quality chroma or luminance keying. The chroma keyer features a color picker to sample background colours for automatic generation of the key parameters. Precise controls for edge and flare are supported, and there is even a foreground color corrector, so you can match the \"look\" of the foreground layer to the background layer for making seamless compositions. The keyer can also be used for pattern and DVE keying. Then when you switch to 8K, you still get four\u003cbr\u003eindependent full-resolution 8K ATEM Advanced Keyers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBuilt-In Transitions\u003c\/strong\u003e\u003cbr\u003eBuilt into the ATEM Constellation 8K is a variety of broadcast-quality 8K native transitions such as mix, dip, wipe, and more. All transitions can be customised by adjusting parameters such as their duration, border color, border width, position, and direction. Transitions are in full 8K native. Also included are DVE transitions, suitable for graphic wipes and stingers when used with the internal media players.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMedia Pool\u003c\/strong\u003e\u003cbr\u003eThe built-in media pool stores broadcast-quality RGBA graphics and animations that can be played back instantly by the two media players. The media pool can hold up to 24 full-resolution 8K stills, or 64 Ultra HD or HD stills. Motion graphics clips for use in animations and stingers can be up to 100 8K RGBA frames, 400 frames in Ultra HD, or 1600 frames in 1080 HD.\u003c\/p\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":44580935762197,"sku":"SWATEMSCN4\/1ME4\/8K","price":17685.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/3_229_12.jpg?v=1680276529"},{"product_id":"blackmagic-design-atem-1-m-e-constellation-hd","title":"Blackmagic Design ATEM 1 M\/E Constellation HD","description":"\u003cp\u003ePowerful live event HD switching, supporting up to 10 individual 3G\/HD-SDI inputs built into a 1 RU chassis, is at hand with the \u003cstrong\u003eBlackmagic Design ATEM 1 M\/E Constellation HD Live Production Switcher.\u003c\/strong\u003e Supporting 3G-SDI and HD-SDI signals, the switcher connects to a wide range of cameras and sources, delivering program output via six 3G-SDI BNC outputs or a webcam output via USB Type-C. In addition, the switcher has a multiview output with up to 16 routable windows that can display inputs, keyed video, graphics, and stills from the media pool, as well as the program output. Each input connects to a built-in Fairlight audio mixer supporting up to 28 channels of audio.\u003c\/p\u003e\r\n\u003cp\u003eThe switcher features a reference video input, and each input features a frame synchronizer, frame rate converter, and format converter. This allows you to mix and match cameras, formats, cameras that do not feature genlock, and video input from computer sources. Upstream and downstream keyers and effects are supported. All this is done live and in real-time with no rendering required. You can control the switcher using the integrated front panel, optional Blackmagic ATEM panels, or via the downloadable control software.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBroadcast-Quality Transitions\u003c\/strong\u003e\u003cbr\u003eThe ATEM Constellation HD includes a wide range of broadcast-quality native transitions such as mix, dip, wipe, and more. All transitions can be customised in the system control menus with adjustments for border colour, border width, position, direction, and a lot more. The ATEM Constellation switcher includes a powerful digital video effects processor for DVE transitions, which can be used to squeeze the current picture offscreen revealing a new video under it. The DVE can even be used to create graphic wipe transitions. To eliminate errors, ATEM Constellation HD features a preview transition feature so you can set up your transitions before you switch it on air.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBuilt-In DVE\u003c\/strong\u003e\u003cbr\u003eATEM Constellation features one independent DVE that lets you reposition graphics and create picture-in-picture compositions. You get amazing quality and the DVE supports the position, resize, and scale, all in real-time. The DVE lets you create professional picture-in-picture effects with customisable 3D borders, shadows, and lighting.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMultiview\u003c\/strong\u003e\u003cbr\u003eConfigurable to 16, 13, 10, 7, or 4 up view, it includes monitoring of program, preview, inputs, media players, DSK, and clean feed with optional labels and audio meters.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProfessional Broadcast Talkback\u003c\/strong\u003e\u003cbr\u003eTo keep crews working as a single creative team, ATEM Constellation features built-in talkback. Talkback supports a 5-pin XLR headset connector, plus a rear-mounted RJ45 connector for interfacing with industry-standard talkback systems such as ClearCom or RTS. You get full talkback control, including program and engineering loops, sidetone control for hearing the headset mic into the headphones, and program mix. ATEM Constellation HD also supports SDI talkback that uses SDI channels 15 and 16 for 2-way communication with Blackmagic Design cameras. You can even use channels 13 and 14 for engineering talkback. It's even possible to mix the talkback mic into the program audio for voiceovers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMedia Pool\u003c\/strong\u003e\u003cbr\u003eThe built-in media pool stores broadcast-quality RGBA graphics and animations that can be played back instantly by the two or four media players. Media players simply appear as additional input sources on the ATEM Constellation HD, so you don't have to use extra SDI inputs for graphics. The built-in media pool holds up to 20 stills and 200 frame animations. You can easily manage all your media using the included ATEM Software Control or download directly from Photoshop using the ATEM Photoshop plug-in.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eChroma Keyers\u003c\/strong\u003e\u003cbr\u003eFor news or virtual set work, ATEM Constellation HD is perfect as it features ATEM advanced keyers for high-quality chroma or luminance keying. The chroma keyer is incredibly powerful and features a colour picker to sample background colours for automatic generation of the key parameters. You get precise controls for edge and flare, and there is even a foreground colour corrector so you can match the \"look\" of the foreground layer to the background layer, making seamless compositions possible. The keyer can also be used for pattern and DVE keying. You get four ATEM Advanced Keyers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUpstream Chroma Keyers\u003c\/strong\u003e\u003cbr\u003eWith four upstream chroma keyers per M\/E row, you get the perfect solution for building virtual sets. The 1 M\/E model has enough keyers to generate a 4-camera virtual set. You can use external image processors for virtual sets, or you can even build a fixed camera virtual set by loading pre-rendered still image backgrounds from the media players and media pool. You can set up macros to change cameras and load the correct background into the media players. With so much flexibility, you can experiment to try out different studio setups.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMulti-Rate 3G-SDI Input\u003c\/strong\u003e\u003cbr\u003eWith 10 multi-rate 3G-SDI input connections, the ATEM Constellation HD is compatible with all types of HD video sources. You can connect equipment in all HD television standards, including 720p, 1080i, and 1080p formats. Only multi-rate 3G-SDI allows switching between HD formats, so you can instantly adapt to the needs of the job you are doing anywhere in the world. The SDI inputs will also handle embedded audio and mix audio from all video inputs. Plus, the program outputs include talkback, tally, and camera control information. That means you can connect any of the switcher SDI outputs back to the camera for program return, camera control, and talkback.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAudio\u003c\/strong\u003e\u003cbr\u003eATEM Constellation HD is the world's first live production switcher that fully embraces live professional audio production. All SDI inputs are connected to a built-in Fairlight audio mixer that features a 6-band parametric EQ, compressor, limiter, noise gate, and expander on each input. The Fairlight audio mixer even has additional inputs for mixing audio from analogue inputs, talkback microphones for voice-over, and more.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eATEM Software Control Panel\u003c\/strong\u003e\u003cbr\u003eThe ATEM Software Control Panel gives you total control over your switcher and is included for free. The ATEM Software Control Panel features a beautifully designed interface with a visual switcher and parameter palettes for making quick adjustments. Multiple users can connect to the switcher via Ethernet and all work on different parts of the event at the same time. The ATEM Software Control also lets you access camera control, audio mixing, media, macro programming, and even control of HyperDeck disk recorders. You can even save the full state of the switcher as XML files, plus all media is backed up from the media pool. You can run the software on Mac or Windows.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSupports Optional Control Panels\u003c\/strong\u003e\u003cbr\u003eATEM Advanced Panels feature an industry-standard, familiar M\/E style layout. Each panel has built-in LCDs for menus, high-quality buttons with customisable illumination colour, a DVE joystick, and a T-bar fader. You can even set up and trigger macros. All rows of M\/E buttons include integrated LCDs for dynamic input button labelling. The 1 M\/E model features a single M\/E row with 10 input buttons. The 2 M\/E model features 2 M\/E rows with 20 input buttons. The massive 4 M\/E model features four M\/E rows with 40 input buttons per row and four independent system control LCD screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eBlackmagic Design ATEM 1 M\/E Constellation HD Live Production Switcher (1 RU)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":44582825427221,"sku":"SWATEMSCN2\/1ME1\/HD","price":1619.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/2_310_26.jpg?v=1680295095"},{"product_id":"blackmagic-design-atem-2-m-e-constellation-hd","title":"Blackmagic Design ATEM 2 M\/E Constellation HD","description":"\u003cp\u003ePowerful live event HD switching, supporting up to 20 individual 3G\/HD-SDI inputs built into a 1 RU chassis, is at hand with the \u003cstrong\u003eBlackmagic Design ATEM 2 M\/E Constellation HD Live Production Switcher. \u003c\/strong\u003eSupporting 3G-SDI and HD-SDI signals, the switcher connects to a wide range of cameras and sources, delivering program output via 12 3G-SDI BNC outputs or a webcam output via USB Type-C. In addition, the switcher has two multiview outputs with up to 16 routable windows that can display inputs, keyed video, graphics, and stills from the media pool, as well as the program output. Each input connects to a built-in Fairlight audio mixer supporting up to 48 channels of audio.\u003c\/p\u003e\n\u003cp\u003eThe switcher features a reference video input, and each input features a frame synchronizer, frame rate converter, and format converter. This allows you to mix and match cameras, formats, cameras that do not feature genlock, and video input from computer sources. Upstream and downstream keyers and effects are supported. All this is done live and in real-time with no rendering required. You can control the switcher using the integrated front panel, optional Blackmagic ATEM panels, or via the downloadable control software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBroadcast-Quality Transitions\u003c\/strong\u003e\u003cbr\u003eThe ATEM Constellation HD includes a wide range of broadcast-quality native transitions such as mix, dip, wipe, and more. All transitions can be customised in the system control menus with adjustments for border colour, border width, position, direction, and a lot more. The ATEM Constellation switcher includes a powerful digital video effects processor for DVE transitions, which can be used to squeeze the current picture offscreen, revealing a new video under it. The DVE can even be used to create graphic wipe transitions. To eliminate errors, ATEM Constellation HD features a preview transition feature so you can set up your transitions before you switch it on air.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBuilt-In DVE\u003c\/strong\u003e\u003cbr\u003eThe ATEM Constellation features two independent DVEs that let you reposition graphics and create picture-in-picture compositions. You get amazing quality, and the DVE supports the position, resize, and scale, all in real-time. The DVE lets you create professional picture-in-picture effects with customisable 3D borders, shadows, and lighting. DVEs can also be used to create amazing DVE transitions with squeeze and swoosh effects for adding excitement to your programming. You can even combine DVE transitions with custom graphics to create your own graphic wipe transitions. The 2 M\/E model includes SuperSource processors for six DVEs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSuperSource\u003c\/strong\u003e\u003cbr\u003eIn addition to the DVEs in the M\/E rows, the 2 M\/E model includes powerful SuperSource multilayer processors with four extra DVE layers plus a background layer, all appearing to ATEM Constellation HD as an additional input source. Any switcher video input can be used for each SuperSource DVE, then it's all layered together over a media pool custom background. SuperSource is just like having an extra multi-layer VFX switcher built-in. SuperSource is perfect for doing picture-in-picture displays for interviews because you can set up the effect while keeping the main DVEs free for other tasks.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMultiview\u003c\/strong\u003e\u003cbr\u003eConfigurable to 16, 13, 10, 7, or 4 up view. It includes monitoring of program, preview, inputs, media players, DSK, and clean feed with optional labels and audio meters. The 2 M\/E model features two multiview outputs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProfessional Broadcast Talkback\u003c\/strong\u003e\u003cbr\u003eTo keep crews working as a single creative team, ATEM Constellation features built-in talkback. Talkback supports a 5-pin XLR headset connector, plus a rear-mounted RJ12 connector for interfacing with industry-standard talkback systems such as ClearCom or RTS. You get full talkback control, including program and engineering loops, sidetone control for hearing the headset mic into the headphones, and program mix. ATEM Constellation HD also supports SDI talkback that uses SDI channels 15 and 16 for 2-way communication with Blackmagic Design cameras. You can even use channels 13 and 14 for engineering talkback. It's even possible to mix the talkback mic into the program audio for voiceovers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMedia Pool\u003c\/strong\u003e\u003cbr\u003eThe built-in media pool stores broadcast quality RGBA graphics and animations that can be played back instantly by the two or four media players. Media players simply appear as additional input sources on the ATEM Constellation HD, so you don't have to use extra SDI inputs for graphics. The built-in media pool holds graphics for use with the media players. The 2 M\/E models can hold 40 stills and 400 frame animations. You can easily manage all your media using the included ATEM Software Control or download directly from Photoshop using the ATEM Photoshop plug-in.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eChroma Keyers\u003c\/strong\u003e\u003cbr\u003eFor news or virtual set work, ATEM Constellation HD is perfect as it features lots of ATEM advanced keyers for high-quality chroma or luminance keying. The chroma keyer is incredibly powerful and features a colour picker to sample background colours for automatic generation of the key parameters. You get precise controls for edge and flare, and there is even a foreground colour corrector so you can match the \"look\" of the foreground layer to the background layer making seamless compositions possible. The keyer can also be used for pattern and DVE keying. You get eight ATEM Advanced Keyers on the 2 M\/E model.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUpstream Chroma Keyers\u003c\/strong\u003e\u003cbr\u003eWith four upstream chroma keyers per M\/E row, you get the perfect solution for building virtual sets. With so many ATEM Advanced chroma keyers, you can use a keyer per camera to create a seamless composition of the camera over the custom background. The 2 M\/E model has enough keyers to generate a 4-camera virtual set. You can use external image processors for virtual sets, or you can even build a fixed camera virtual set by loading pre-rendered still image backgrounds from the media players and media pool. You can set up macros to change cameras and load the correct background into the media players. With so much flexibility, you can experiment to try out different studio setups.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMulti-Rate 3G-SDI Input\u003c\/strong\u003e\u003cbr\u003eWith up to 20 multi-rate 3G-SDI input connections, depending on the model, the ATEM Constellation HD is compatible with all types of HD video sources. You can connect equipment in all HD television standards, including 720p, 1080i, and 1080p formats. Only multi-rate 3G-SDI allows switching between HD formats, so you can instantly adapt to the needs of the job you are doing anywhere in the world. The SDI inputs will also handle embedded audio and mix audio from all video inputs. Plus, the program outputs include talkback, tally, and camera control information. That means you can connect any of the switcher SDI outputs back to the camera for program return, camera control, and talkback.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAudio\u003c\/strong\u003e\u003cbr\u003eATEM Constellation HD fully embraces live professional audio production. All SDI inputs are connected to a built-in Fairlight audio mixer that features a 6-band parametric EQ, compressor, limiter, noise gate, and expander on each input.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eATEM Software Control Panel\u003c\/strong\u003e\u003cbr\u003eThe ATEM Software Control Panel gives you total control over your switcher and is included for free. The ATEM Software Control Panel features a beautifully designed interface with a visual switcher and parameter palettes for making quick adjustments. Multiple users can connect to the switcher via Ethernet, and all work on different parts of the event at the same time. The ATEM Software Control also lets you access camera control, audio mixing, media, macro programming, and even control of HyperDeck disk recorders. You can save the full state of the switcher as XML files, plus all media is backed up from the media pool. You can run the software on Mac or Windows.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSupports Optional Control Panels\u003c\/strong\u003e\u003cbr\u003eThree models of ATEM Advanced Panels are available. ATEM Advanced Panels feature an industry-standard, familiar M\/E style layout. Each panel has built-in LCDs for menus, high-quality buttons with customisable illumination colour, a DVE joystick, and a T-bar fader. You can even set up and trigger macros. All rows of M\/E buttons include integrated LCDs for dynamic input button labelling. The 1 M\/E model features a single M\/E row with 10 input buttons. The 2 M\/E model features 2 M\/E rows with 20 input buttons. The massive 4 M\/E model features four M\/E rows with 40 input buttons per row and four independent system control LCD screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlackmagic Design ATEM 2 M\/E Constellation HD Live Production Switcher (1 RU)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":44582827032853,"sku":"SWATEMSCN2\/1ME2\/HD","price":2745.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/2_310_27.jpg?v=1680295105"},{"product_id":"blackmagic-design-atem-4-m-e-constellation-hd","title":"Blackmagic Design ATEM 4 M\/E Constellation HD","description":"\u003cp\u003ePowerful live event HD switching, supporting up to 40 individual 3G-\/HD-SDI inputs built into 2 RU chassis, is at hand with the \u003cstrong\u003eBlackmagic Design ATEM 4 M\/E Constellation HD Live Production Switcher\u003c\/strong\u003e. Supporting 3G-SDI and HD-SDI signals, the switcher connects to a wide range of cameras and sources, delivering program output via 24 3G-SDI BNC outputs or a webcam output via USB Type-C. In addition, the switcher has four multiview outputs with up to 16 routable windows that can display inputs, keyed video, graphics, and stills from the media pool, as well as the program output. Each input connects to a built-in Fairlight audio mixer supporting up to 156 channels of audio.\u003c\/p\u003e\r\n\u003cp\u003eThe switcher features a reference video input, and each input features a frame synchroniser, frame rate converter, and format converter. This allows you to mix and match cameras, formats, cameras that do not feature genlock, and video input from computer sources. Upstream and downstream keyers and effects are supported. All this is done live and in real-time with no rendering required. You can control the switcher using the integrated front panel, optional Blackmagic ATEM panels, or via the downloadable control software.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBroadcast-Quality Transitions\u003c\/strong\u003e\u003cbr\u003eThe ATEM Constellation HD includes a wide range of broadcast-quality native transitions such as mix, dip, wipe, and more. All transitions can be customised in the system control menus with adjustments for border colour, border width, position, direction, and a lot more. The ATEM Constellation switcher includes a powerful digital video effects processor for DVE transitions, which can be used to squeeze the current picture offscreen revealing a new video under it. The DVE can even be used to create graphic wipe transitions. To eliminate errors, ATEM Constellation HD features a preview transition feature so you can set up your transitions before you switch it on air.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBuilt-In DVE\u003c\/strong\u003e\u003cbr\u003eThe ATEM Constellation features four independent DVEs that let you reposition graphics and create picture-in-picture compositions. You get amazing quality and the DVE supports the position, resize, and scale, all in real-time. The DVE lets you create professional picture-in-picture effects with customisable 3D borders, shadows, and lighting. DVEs can also be used to create amazing DVE transitions with squeeze and swoosh effects for adding excitement to your programming. You can even combine DVE transitions with custom graphics to create your own graphic wipe transitions. The 4 M\/E model includes SuperSource processors for eight DVEs, creating a total of 12 DVEs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSuperSource\u003c\/strong\u003e\u003cbr\u003eIn addition to the DVEs in the M\/E rows, the 4 M\/E model includes powerful SuperSource multilayer processors with eight extra DVE layers plus a background layer, all appearing to ATEM Constellation HD as an additional input source. Any switcher video input can be used for each SuperSource DVE, then it's all layered together over a media pool custom background. SuperSource is just like having an extra multilayer VFX switcher built-in. SuperSource is perfect for doing picture-in-picture displays for interviews because you can set up the effect while keeping the main DVEs free for other tasks.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMultiview\u003c\/strong\u003e\u003cbr\u003eConfigurable to 16, 13, 10, 7, or 4 up view, it includes monitoring of program, preview, inputs, media players, DSK, and clean feed with optional labels and audio meters. The 4 M\/E model features four multiview outputs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProfessional Broadcast Talkback\u003c\/strong\u003e\u003cbr\u003eTo keep crews working as a single creative team, ATEM Constellation features built-in talkback. Talkback supports a 5-pin XLR headset connector, plus a rear-mounted RJ12 connector for interfacing with industry-standard talkback systems such as ClearCom or RTS. You get full talkback control, including program and engineering loops, sidetone control for hearing the headset mic into the headphones, and program mix. ATEM Constellation HD also supports SDI talkback that uses SDI channels 15 and 16 for 2-way communication with Blackmagic Design cameras. You can even use channels 13 and 14 for engineering talkback. It's even possible to mix the talkback mic into the program audio for voiceovers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMedia Pool\u003c\/strong\u003e\u003cbr\u003eThe built-in media pool stores broadcast quality RGBA graphics and animations that can be played back instantly by the four media players. Media players simply appear as additional input sources on the ATEM Constellation HD, so you don't have to use extra SDI inputs for graphics. The built-in media pool holds graphics for use with the media players. The 4 M\/E models can hold 60 stills and 1200 frame animations, with four video clips up to 1080p60. You can easily manage all your media using the included ATEM Software Control or download directly from Photoshop using the ATEM Photoshop plug-in.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eChroma Keyers\u003c\/strong\u003e\u003cbr\u003eFor news or virtual set work, ATEM Constellation HD is perfect as it features lots of ATEM advanced keyers for high-quality chroma or luminance keying. The chroma keyer is incredibly powerful and features a colour picker to sample background colours for automatic generation of the key parameters. You get precise controls for edge and flare, and there is even a foreground colour corrector so you can match the \"look\" of the foreground layer to the background layer making seamless compositions possible. The keyer can also be used for pattern and DVE keying. You get 16 ATEM Advanced Keyers on the 4 M\/E model.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUpstream Chroma Keyers\u003c\/strong\u003e\u003cbr\u003eWith four upstream chroma keyers per M\/E row, you get the perfect solution for building virtual sets. With so many ATEM Advanced chroma keyers, you can use a keyer per camera to create a seamless composition of the camera over the custom background. The 4 M\/E model has enough keyers to generate a 4-camera virtual set. You can use external image processors for virtual sets, or you can even build a fixed camera virtual set by loading pre-rendered still image backgrounds from the media players and media pool. You can set up macros to change cameras and load the correct background into the media players. With so much flexibility, you can experiment to try out different studio setups.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMulti-Rate 3G-SDI Input\u003c\/strong\u003e\u003cbr\u003eWith up to 20 multi-rate 3G-SDI input connections, depending on the model, the ATEM Constellation HD is compatible with all types of HD video sources. You can connect equipment in all HD television standards, including 720p, 1080i, and 1080p formats. Only multi-rate 3G-SDI allows switching between HD formats, so you can instantly adapt to the needs of the job you are doing anywhere in the world. The SDI inputs will also handle embedded audio and mix audio from all video inputs. Plus, the program outputs include talkback, tally, and camera control information. That means you can connect any of the switcher SDI outputs back to the camera for program return, camera control, and talkback.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAudio\u003c\/strong\u003e\u003cbr\u003eThe ATEM Constellation HD fully embraces live professional audio production. All SDI inputs are connected to a built-in Fairlight audio mixer that features a 6-band parametric EQ, compressor, limiter, noise gate, and expander on each input. On the ATEM 4 M\/E Constellation HD model, there are two MADI outputs for breaking out channels 1, 2, 3, and 4 of the first 30 SDI inputs out to an external audio engineer, plus a MADI input for allowing an extra 32 external audio channels into the audio mixer. The Fairlight audio mixer even has additional inputs for mixing audio from analogue inputs, talkback microphones for voice-over, and more.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eATEM Software Control Panel\u003c\/strong\u003e\u003cbr\u003eThe ATEM Software Control Panel gives you total control over your switcher and is included for free. The ATEM Software Control Panel features a beautifully designed interface with a visual switcher and parameter palettes for making quick adjustments. Multiple users can connect to the switcher via Ethernet and all work on different parts of the event at the same time. The ATEM Software Control also lets you access camera control, audio mixing, media, macro programming, and even control of HyperDeck disk recorders. You can even save the full state of the switcher as XML files, plus all media is backed up from the media pool. You can run the software on Mac or Windows.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSupports Optional Control Panels\u003c\/strong\u003e\u003cbr\u003eThree models of ATEM Advanced Panels are available. ATEM Advanced Panels feature an industry-standard, familiar M\/E style layout. Each panel has built-in LCDs for menus, high-quality buttons with customisable illumination colour, a DVE joystick, and a T-bar fader. You can even set up and trigger macros. All rows of M\/E buttons include integrated LCDs for dynamic input button labelling. The 1 M\/E model features a single M\/E row with 10 input buttons. The 2 M\/E model features 2 M\/E rows with 20 input buttons. The massive 4 M\/E model features four M\/E rows with 40 input buttons per row and four independent system control LCD screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eBlackmagic Design ATEM 4 M\/E Constellation HD Live Production Switcher (2 RU)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":44582827950357,"sku":"SWATEMSCN2\/1ME4\/HD","price":6135.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/2_310_28.jpg?v=1680295125"},{"product_id":"rode-rodecaster-pro-ii-integrated-audio-production-studio","title":"RODE RODECaster Pro II Integrated Audio Production Studio","description":"\u003cp\u003eSmartly designed for more than podcasting, the Rode RODECaster Pro II integrated audio production studio expands on the success of its predecessor with enhancements in sound, connectivity, and adaptability, pushing its feature set into attractive territory for live streamers, gamers, and musically inclined content creators. This all-in-one solution makes advanced effortless with fluid workflows via a large touchscreen and tactile controls, studio-quality onboard processing, multitrack recording and mixing, assignable sound pads, and extensive customization. Produce and mix on the fly in just moments, with up to four microphones, music, prerecorded segments, and remote guests on calls, all going on at once.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVersion II Upgrades\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePremium boutique-class preamps with a ground-up redesign and mic\/line\/instrument combo inputs\u003c\/li\u003e\n\u003cli\u003eCustomizable mixer with RGB color coding\u003c\/li\u003e\n\u003cli\u003eExtensively programmable SMART pads for launching sounds, shows, mixer actions, and more\u003c\/li\u003e\n\u003cli\u003eiOS-ready dual USB Type-C ports to connect multiple computers or mobile devices\u003c\/li\u003e\n\u003cli\u003eAdvanced high-quality Bluetooth input\/output, Wi-Fi, and Ethernet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e4 High-End Preamps\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt to compete with pricey, boutique microphone preamplifiers, the Revolution preamps deliver transparency and detail with ultralow noise (just -131.5 dBV) and incredible gain up to 76 dB, which enables ideal recording levels, even for low-output dynamic mics—no mic boosters, lifters, or normalization needed.\u003c\/li\u003e\n\u003cli\u003ePro-grade Neutrik XLR-1\/4\" combo jacks provide connection points for microphones (+48V phantom power is available for condenser mics), line-level sources, or instruments such as electric guitar and bass. Pairs of the analog input channels can be linked to easily record stereo mic setups, synths, DJ mixers, or outboard gear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStudio-Quality Processing and Effects\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAuthentic emulations of classic APHEX hardware processors are onboard—Aural Exciter elevates clarity and sheen, Big Bottom adds warm and deep low-frequency punch, and Compellor glues it all together with compression\/leveling—as well as other widely used processors including a reverb, delay, pitch shifter, equalizer, high-pass filter, noise gate, de-esser, robot effects, and more.\u003c\/li\u003e\n\u003cli\u003eUse the VoxLab editor to quickly manipulate parameters on several processors via three intuitive controls, or access the advanced editor (on-screen or with a computer) for intricate editing. Use presets, save your own presets, and load them at any time to immediately call up your favorite settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e8 Programmable SMART Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIn place of the original model's sound pads, the RODECaster Pro II has programmable SMART pads. Each SMART pad can trigger audio files such as music or sound bites, activate special effects, send MIDI commands to software or hardware, or execute mixer functions like fades, music ducking, and bleeping.\u003c\/li\u003e\n\u003cli\u003eBank switching buttons beneath the pads allow easy access to eight banks for a total of 64 unique actions.\u003c\/li\u003e\n\u003cli\u003eSelect the color of your choice for the pad illumination, a convenient way to remember which effect is on which pad.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCustomizable Multichannel Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe 9-channel mixer features 6 channels with full-size broadcast-quality physical faders and three virtual channels, with the option to expand via digital hosting and hardware integrations with future updates.\u003c\/li\u003e\n\u003cli\u003ePhysical faders and virtual channels are freely assignable to the four analog inputs, USB and Bluetooth interfaces, and SMART pads.\u003c\/li\u003e\n\u003cli\u003eEach channel offers a pan control, mute button, and listen button (pre- or after-fader solo). With channel-specific color coding on the RODECaster Pro II, you're assured fast identification of your sources.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStereo or Multitrack Recording\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecord stereo or individual multitrack files to a microSD card or USB storage such as an external drive.\u003c\/li\u003e\n\u003cli\u003eChoose uncompressed WAV format for maximum audio quality or MP3 format to save storage space and extend recording time.\u003c\/li\u003e\n\u003cli\u003eUse the RODECaster Pro II as a high-quality USB audio interface to stream\/record to a computer with ultrafast data transfer.\u003c\/li\u003e\n\u003cli\u003eRODECaster Pro II runs at 24-bit \/ 48 kHz, the industry standard for video production.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMonitoring for All\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour high-powered 1\/4\" headphone outputs provide clear personal monitoring for the host and up to three guests.\u003c\/li\u003e\n\u003cli\u003eSeparate color-coded volume controls let all participants easily control their own headphone levels.\u003c\/li\u003e\n\u003cli\u003eConnect a pair of active speakers to the 1\/4\" line outputs if you need to amplify your content to a live audience, or go wireless and monitor through a Bluetooth speaker to check the mix on an alternate system.\u003c\/li\u003e\n\u003cli\u003eSelectable high or low sensitivity optimizes the gain structure of the headphone outputs, so you can set headphone levels easier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePodcast-Friendly Specialties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProducer talkback mode lets you communicate with guests without affecting the recording.\u003c\/li\u003e\n\u003cli\u003eEquipped with advanced Bluetooth connectivity, the RODECaster Pro II can be used for ultrahigh-quality phone-call integration, crystal-clear audio streaming, wireless monitoring, and more.\u003c\/li\u003e\n\u003cli\u003eMix-minus on the Bluetooth and USB channels prevents the person on the other end of the call from hearing a distracting echo, making the RODECaster Pro II great for remote and local guests in your podcast.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFast Workflow\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSave multiple Shows containing all of the RODECaster Pro II's settings, an ideal way to instantly switch between types of productions such as podcasts, live streams, and game commentary.\u003c\/li\u003e\n\u003cli\u003eTailored presets for Rode microphones and other popular models help you get great sounds in a hurry.\u003c\/li\u003e\n\u003cli\u003eThe 5.5\" color touchscreen with haptic feedback and automatic brightness adjustment, and tilted for optimal viewing. Next to the touchscreen, a rotary encoder is placed for efficient navigation and control.\u003c\/li\u003e\n\u003cli\u003eDual USB Type-C interfaces allow two computers or mobile devices to be connected simultaneously, unlocking great options for everything from remote podcasting to organizing complex streaming setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn internal 1.5 GHz quad-core audio engine delivers significant processing power and unlocks huge potential for future updates.\u003c\/li\u003e\n\u003cli\u003eBidirectional MIDI communication allows excellent integration with DAWs and streaming software.\u003c\/li\u003e\n\u003cli\u003eWi-Fi and Ethernet connections offer high-speed communication with computers and other devices for updating firmware wirelessly, software and hardware integrations, and more.\u003c\/li\u003e\n\u003cli\u003eThe USB connections are MFi-certified for seamless integration with iOS devices such as iPads.\u003c\/li\u003e\n\u003cli\u003ePower the RODECaster Pro II via the included AC adapter or through USB Type-C PD (30W).\u003c\/li\u003e\n\u003cli\u003eReady for global use, the unit has 10 languages—English, Chinese, Japanese, Korean, French, German, Italian, Spanish, Portuguese, and Hindi.\u003c\/li\u003e\n\u003cli\u003eRODECaster Pro II is fully updatable for continued evolution with new firmware that will be available to all users via Wi-Fi, Ethernet, or USB.\u003c\/li\u003e\n\u003cli\u003eProtect your RODECaster Pro II with the optional RODECover II, a tough polycarbonate cover that guards it against debris, dust, and spills.\u003c\/li\u003e\n\u003cli\u003eMounting options include a 3\/8\" female thread for various stand types and VESA mounting holes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rode","offers":[{"title":"Default Title","offer_id":44583005520149,"sku":"RCPII-I","price":1149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1653335138_img_1732979.jpg?v=1743327092"},{"product_id":"blackmagic-design-hyperdeck-shuttle-hd","title":"Blackmagic Design HyperDeck Shuttle HD","description":"\u003cp\u003eAdd a desktop shuttle to quickly and easily play back video clips with this \u003cstrong\u003eHyperDeck Shuttle HD \u003c\/strong\u003efrom\u003cstrong\u003e Blackmagic Design\u003c\/strong\u003e. The HyperDeck Shuttle HD features a compact design that allows you to run your HDMI video in and out and connect to a computer or ATEM switch to control media playback using its large search dial and buttons. It also features a built-in teleprompter to utilize any text files, without requiring third-party software.\u003c\/p\u003e\r\n\u003cp\u003eThe Shuttle HD runs Blackmagic OS, supports ProRes and DNx file formats, and it is compatible with a wide range of editing software such as Premiere Pro, Avid, and DaVinci Resolve, and it can also be used to stream H.264 video to streaming services such as YouTube or Vimeo. It can be used to record video using its SD card slot or USB Type-C output to an optional drive, or you can connect to the Blackmagic MultiDock to record to multiple SSDs. The Ethernet port provides external control and file transfers over a network.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMastering Recorder\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWith support for H.264, ProRes, and DNx files, you can record true broadcast masters. You can even select between PCM or AAC audio. That's great for higher-quality mastering when used with ATEM Mini switchers. You get everything needed to send shows to broadcasters and for uploading to streaming services like YouTube.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eMedia Player\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe large search dial lets you visually browse your clip library, then you can use the previous clip button to cue the start of the clip. After playing, you can use the clip button to stop the playback at the end of the clip. ATEM switchers can even remote control HyperDeck Shuttle via Ethernet.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTraditional Broadcast Deck Controls\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHyperDeck Shuttle includes a control panel that's very fast to use, and the buttons are similar to a traditional broadcast deck. Simply press the record button and you instantly start recording the video input to a file. The large machined metal search dial supports shuttle, jog, and scroll so you can find clips fast. Plus, all deck control functions can be triggered remotely using the Ethernet network.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eSupports SD Cards and UHS-II Cards\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHyperDeck Shuttle supports recording to common SD and UHS-II cards so you don't need expensive custom media. SD cards are the perfect choice for broadcast media because they are small and very affordable. Plus, you can even record to external drives via USB Type-C. When using USB disks, if you use a USB hub or Blackmagic MultiDock, you can even record on multiple disks for nonstop recording. When using H.264, the files are so small you get very long recordings even on smaller low-cost cards. This means you can record up to 157 hours of H.264 in 1080p59.94 on a 1TB card.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003ePopular ProRes, DNx, and H.264 Files\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHyperDeck Shuttle HD supports the most popular codecs in use today, including broadcast-quality DNx and ProRes file formats. You also get space-saving H.264 when recording in NTSC, PAL, 720p, 1080p plus even true 1080i interlaced formats. That means you get tight 60:1 to 285:1 compression ratios for very small files at full broadcast quality. Plus you can choose uncompressed PCM audio, or even AAC audio when uploading files to YouTube. HyperDeck Shuttle HD supports both ExFAT used on Windows and HFS+ used on macOS disk formatting standards, so disks can be mounted and read on both platforms. It also supports recording long-duration events into a single video file.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eVideo and Control Connections\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe HDMI input can be connected to cameras and switchers such as ATEM Mini, and the HDMI output can be connected to monitors for presentations or ATEM Mini switchers as a long-form media player. The rear panel also includes a 12 VDC power input and a power supply is included. The 1 Gigabit Ethernet connection allows control and remote file uploads.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eHDMI Compatibility with ATEM Mini Switchers\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWith built-in HDMI input and output, you can connect to consumer cameras, monitors, televisions, video projectors, and even ATEM Mini switchers. The HDMI connections will automatically switch video standards to handle both SD and HD equipment.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eBuilt-In Teleprompter\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWith such a large search dial, HyperDeck Shuttle HD can be used as a teleprompter. Simply change to teleprompter in the record menu and it will read standard RTF text files like scripts, without the need for custom software. Scripts can be written in simple text editors such as TextEdit. You can move between multiple scripts with the previous and next clip buttons. If you press both jog and scroll buttons, you can live scroll the script like a traditional teleprompter, as well as adjust the size and font displayed.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNetwork File Transfers\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHyperDeck Shuttle allows media files to be uploaded remotely using simple FTP client software. With 1G Ethernet built into the HyperDeck Shuttle, file transfers are very fast, and sometimes faster than the SD card media disk. For remote deck control, all models use an easy-to-learn text-based protocol, so you can use a simple terminal app like Telnet to test control commands.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003ePowered by Blackmagic OS\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe innovative Blackmagic OS has been designed for high-performance film and broadcast products, and it manages all functions on HyperDeck Shuttle. Only Blackmagic OS provides instant power on while including powerful features such as video recording, timecode, audio, menu overlays, fast networking, multi-disk media management, and even localization. The menus are overlaid on the video output and include settings to customize your HyperDeck Shuttle HD, plus the menus can be changed to display in either light or dark mode.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eLocalized for 13 Popular Languages\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHyperDeck Shuttle HD supports multiple languages so you don't need to learn a new language just to use it. You get support for English, Chinese, Japanese, Korean, Spanish, German, French, Russian, Italian, Portuguese, Turkish, Polish, and Ukrainian languages.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCompatible with Software and Streaming Sites\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHyperDeck Shuttle HD records files that are compatible with virtually all post-production software. Plus if you record in H.264, you can upload files from HyperDeck Shuttle direct to streaming services such as YouTube, Facebook, Vimeo, and Twitter. You can use popular editing software such as DaVinci Resolve, Apple Final Cut Pro, Adobe Premiere Pro, or Avid Media\u003c\/li\u003e\r\n\u003cli\u003eComposer because HyperDeck uses the same file formats used in post-production. Even VFX software such as Fusion and Adobe After Effects work with the files. Because HyperDeck records to disks formatted on computers, you can simply mount the disk on any computer and start editing without needing to copy files.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCompatible with Switchers, Disk Docks, and Cameras\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAs HyperDeck Shuttle doesn't include SSD slots, you can add a Blackmagic MultiDock 10G to use regular SSDs, allowing compatibility with media from other HyperDeck models, and\u003c\/li\u003e\r\n\u003cli\u003eHyperDeck Shuttle will manage multiple disks for you. HyperDeck Shuttle is also a perfect mastering recorder when used with ATEM switchers, because it has more record formats, plus it's a great clip player for adding pre-recorded clips into live production.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":44583952548117,"sku":"HYPERD\/PTSHD","price":785.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1651141832_img_1740749.jpg?v=1680305008"},{"product_id":"blackmagic-design-atem-2-m-e-advanced-panel","title":"Blackmagic Design ATEM 2 M\/E Advanced Panel","description":"\u003cp\u003eThe\u003cstrong\u003e ATEM 2 M\/E Advanced Panel\u003c\/strong\u003e is a highly sophisticated advancement of previous panel models as a companion to separately available professional ATEM switchers from Blackmagic Design. Using features such as high-quality buttons, knobs, fader bars, and a 3-axis joystick, you'll be able to customize the extensive panel to your precise needs.\u003c\/p\u003e\r\n\u003cp\u003eComplex live productions require a versatile control panel, and the ATEM 2 M\/E Advanced Panel allows you to customize, monitor, and switch your live broadcast events with features such as camera switching, executing transitions, fades, DVE effects, and it also sports 8 on-air indicators. The panel features two rows of M\/E with 20 input buttons per row, two system control LCDs, independent LCDs for custom labeling of every row and button, 20 direct cross points, 40 shifted cross points, two preview transitions, and various DSK transition selectors such as Auto, Cut, and Tie\/Preview.\u003c\/p\u003e\r\n\u003cp\u003eThe ATEM 2 M\/E Advanced Panel connects to the switcher via 10\/100\/1000 BaseT Ethernet, and there are four Ethernet loop outputs for connecting to another panel or to a media-management computer. The panel receives firmware updates via its USB Type-C input.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTri-color LED crosspoint buttons, 20 direct cross points and 40 shifted cross points\u003c\/li\u003e\r\n\u003cli\u003eTwo M\/E rows with 20 input buttons in each row\u003cbr\u003eTwo system control LCDs for each row and LCDs for customizing labels for each button\u003c\/li\u003e\r\n\u003cli\u003eTwo fader bars, 3-axis joystick, numeric keypad\u003c\/li\u003e\r\n\u003cli\u003eEight on-air indicators\u003c\/li\u003e\r\n\u003cli\u003eTwo transition previews with transition rate display\u003c\/li\u003e\r\n\u003cli\u003eCompatible Operating Systems\u003c\/li\u003e\r\n\u003cli\u003emacOS 10.14 Mojave, 10.15 Catalina or later\u003c\/li\u003e\r\n\u003cli\u003eWindows 10, 64-bit\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":44584259485973,"sku":"SWPANELADV2ME20","price":9709.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1594656940_img_1387433_1.jpg?v=1680311436"},{"product_id":"blackmagic-design-atem-2-m-e-advanced-panel-30","title":"Blackmagic Design ATEM 2 M\/E Advanced Panel 30","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":44584260141333,"sku":"SWPANELADV2ME30","price":11965.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1655375459_img_1774853.jpg?v=1680311451"},{"product_id":"blackmagic-design-atem-microphone-converter","title":"Blackmagic Design ATEM Microphone Converter","description":"\u003cdiv\u003e\n\u003cdiv data-selenium=\"overviewLongDescription\" class=\"productDescription_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"js-injected-html text_UbV5SNP5Eo\"\u003e\n\u003cp\u003eWhether you're building a podcasting studio or you just need more microphones, the\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eBlackmagic Design ATEM Microphone Converter\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eallows audio-input expansion for your ATEM Television Studio by converting four analog XLR inputs to MADI. Equipped with two BNC MADI I\/O ports, the Microphone Converter simply plugs into the ATEM Television Studio MADI port, so there's no complex setup required—and additional units can even be daisy chained for more sources. The four XLR-1\/4\" combo analog inputs are mic-\/line-selectable and provide 48V phantom power.\u003c\/p\u003e\n\u003cp\u003eThe ATEM Microphone Converter utilizes 32-bit float digital preamps and eight ADCs per input to capture clip-free, 24-bit \/ 48 kHz recordings with an extremely low noise floor, a wide dynamic range, and very low distortion—no matter how loud or quiet a performance gets. A convenient HDMI output with scrolling audio waveforms enables you to connect a display to monitor the status of your audio. USB and Ethernet ports allow for remote admin and software updates via the ATEM Software Control app.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"feature_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"feature_UbV5SNP5Eo\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"feature_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"featureHeader_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"text_TAw0W35QK_ comfy_TAw0W35QK_ sizeTitle2_TAw0W35QK_ weightNormal_TAw0W35QK_ primary_i3MsQsqoe0\"\u003eDigital Preamplifier Design\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"js-injected-html text_UbV5SNP5Eo\"\u003e\n\u003cul\u003e\n\u003cli\u003eWith the four, wide-dynamic-range inputs that eliminate the need for analog preamplifiers, microphone levels are adjusted by a digital preamplifier gain stage that is extremely stable.\u003c\/li\u003e\n\u003cli\u003eThe analog audio levels of different microphone types and brands can vary widely, so this digital gain stage allows compensation for the specific brand of microphone you use. Best of all, the digital preamplifier is processed in the full internal 32-bit float RAW audio bit depth, so you're adjusting with much greater precision than the MADI audio standard can support. This results in an extremely clean and noise-free gain stage. Then, the final levels can be finessed on the ATEM audio mixer as you work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"feature_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"featureHeader_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"text_TAw0W35QK_ comfy_TAw0W35QK_ sizeTitle2_TAw0W35QK_ weightNormal_TAw0W35QK_ primary_i3MsQsqoe0\"\u003eHigh-End Analog-to-Digital Conversion\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"js-injected-html text_UbV5SNP5Eo\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe ATEM Microphone Converter steps outside conventional audio industry design practice of using an individual audio ADC, as each input implements analog-to-digital conversion using eight high-dynamic-range audio ADCs that function collectively as one ultrahigh-dynamic-range audio ADC. This means each input channel delivers an impressive 131 dBA of dynamic range. Plus you get a remarkably low distortion of only 0.002%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"feature_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"featureHeader_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"text_TAw0W35QK_ comfy_TAw0W35QK_ sizeTitle2_TAw0W35QK_ weightNormal_TAw0W35QK_ primary_i3MsQsqoe0\"\u003eExtremely Low -129 dBV Noise Floor\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"js-injected-html text_UbV5SNP5Eo\"\u003e\n\u003cul\u003e\n\u003cli\u003eA common problem with mic converters is the higher noise floor where electrical noise is generated in the preamplifiers. The ATEM Microphone Converter eliminates this problem by using a very different design. The input is converted directly using its ultrahigh-dynamic-range conversion, so you pass RAW audio to the switcher, and then let the switcher apply as much gain as required for the correct audio level.\u003c\/li\u003e\n\u003cli\u003eThis means you don't get an injection of noise caused by an analog gain stage, so you get an extremely low, fixed noise floor of -129 dBV, regardless of digital gain applied.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"feature_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"featureHeader_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"text_TAw0W35QK_ comfy_TAw0W35QK_ sizeTitle2_TAw0W35QK_ weightNormal_TAw0W35QK_ primary_i3MsQsqoe0\"\u003ePrecisely Matched Analog Inputs\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"js-injected-html text_UbV5SNP5Eo\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe ATEM Microphone Converter features extremely precise matching between the four audio-input channels. The multi-ADC-per-input design technique means that each analog audio input has very similar specifications and tolerances, so all input channels are statistically more uniform. This means you get similar performance no matter what input you connect the microphone to—and even between multiple ATEM Microphone Converters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"feature_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"featureHeader_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"text_TAw0W35QK_ comfy_TAw0W35QK_ sizeTitle2_TAw0W35QK_ weightNormal_TAw0W35QK_ primary_i3MsQsqoe0\"\u003eConnects via MADI for Multichannel Audio\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"js-injected-html text_UbV5SNP5Eo\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe ATEM Microphone Converter’s MADI output embeds the four analog inputs as MADI channels 1, 2, 3, and 4. The converter also includes a MADI input, which is used to loop multiple converters when you need more than four channels of audio on a single MADI link.\u003c\/li\u003e\n\u003cli\u003eThis means if a second converter is connected to the input of another, the upstream converter will stack its four channels above the four channels on the downstream converter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"feature_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"featureHeader_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"text_TAw0W35QK_ comfy_TAw0W35QK_ sizeTitle2_TAw0W35QK_ weightNormal_TAw0W35QK_ primary_i3MsQsqoe0\"\u003eHDMI Monitoring with Scrolling Audio Waveforms\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"js-injected-html text_UbV5SNP5Eo\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe ATEM Microphone Converter also includes an HDMI video monitoring output, so you can connect a simple TV or computer monitor for a full status display. It enables you to display four scrolling waveforms over the last 60 seconds of recording time, which is informative to watch. There are also audio meters to show the levels at the input connectors. Each channel also includes a custom label set via the software utility.\u003c\/li\u003e\n\u003cli\u003eThere are also indicators to show the switch settings for mic-\/line-input selection and phantom power. Plus if you daisy-chain converters, the monitoring output will adapt and display more than four channels. You can even set a converter name that will be displayed on the monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":44893479960853,"sku":"SWATEMTVSTDMC","price":629.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1677164151_1753949.jpg?v=1684915996"},{"product_id":"blackmagic-atem-television-studio-hd8","title":"Blackmagic ATEM Television Studio HD8","description":"\u003cspan\u003eAdd an all-in-one live streaming switcher to your television studio, remote production, or live venue with the \u003c\/span\u003e\u003cb\u003eATEM Television Studio HD8\u003c\/b\u003e\u003cspan\u003e from \u003c\/span\u003e\u003cb\u003eBlackmagic Design\u003c\/b\u003e\u003cspan\u003e. This compact, redesigned live TV switcher is a great fit to any streaming production, providing eight 3G-SDI inputs that support up to 1080p60 video, built-in live streaming, USB webcam support, a 58-channel audio mixer, chroma keyers, DVE, transitions, media players, internal recording, and talkback support. The switcher is also compatible with the Blackmagic Cloud, so your program recordings can be available immediately from anywhere around the globe.\u003c\/span\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe switcher features an all-new button layout, and it's made from polycarbonate material, so it's much lighter than its predecessor. It provides numerous enhancements to the layout with professional buttons, LCD label displays, and an easy-to-navigate button layout.\u003c\/p\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":44893532750101,"sku":"SWATEMTVSTA\/HD08","price":5475.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1677164151_1753950.jpg?v=1684916780"},{"product_id":"blackmagic-design-atem-1-m-e-advanced-panel-20","title":"Blackmagic Design ATEM 1 M\/E Advanced Panel 20","description":"Control your BMD ATEM switcher with the ATEM 1 M\/E Advanced Panel 20 from Blackmagic Design. The full-featured control panel is an essential companion for any ATEM switcher, providing tactile accessibility and two independent system control LCDs to manage switching tasks during production, regardless of size and scope. Four-port Ethernet connectivity on the rear of the panel ensures that no additional network equipment is required and that the unit will integrate seamlessly into the most challenging live production applications.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe unit features a wide array of colour backlit buttons, including 20 input buttons, and it has buttons for controlling up to four upstream and four downstream keyers as well as four M\/E rows. A dynamic 3-axis joystick and an ergonomically designed T-bar facilitate precise, real-time DVE control with the T-bar, providing targeted adjustment prowess for wipes, fades, and other broadcast-quality transitions. In addition to allowing you to create adjustable auto transitions, the panel has a dedicated preview transition button and a single-button Fade to Black option that is applicable to the entire output, all at once.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMains power is provided via an optional power cord connected to the IEC input, which also offers a second input option for redundant power. A built-in USB-C port is included for firmware updates. The compact panel design allows the unit to fit in standard equipment racks, so that it may be easily integrated in fly-away kits or broadcast trucks.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSwitching Features\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003e20 direct crosspoints\u003c\/li\u003e\n\u003cli\u003e40 shifted crosspoints\u003c\/li\u003e\n\u003cli\u003eTri-colour LED crosspoint buttons\u003c\/li\u003e\n\u003cli\u003e2 LCD menu displays\u003c\/li\u003e\n\u003cli\u003e1 destination bus\u003c\/li\u003e\n\u003cli\u003e1 source select bus\u003c\/li\u003e\n\u003cli\u003eNumeric keypad\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":47907857367317,"sku":"SWPANELADV1ME20","price":5859.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1694702738_1787636.jpg?v=1705565881"},{"product_id":"blackmagic-design-atem-1-m-e-advanced-panel-30","title":"Blackmagic Design ATEM 1 M\/E Advanced Panel 30","description":"Control your BMD ATEM switcher with the ATEM 1 M\/E Advanced Panel 30 from Blackmagic Design. The full-featured control panel is an essential companion for any ATEM switcher, providing tactile accessibility and three independent system control LCDs to manage switching tasks during production, regardless of size and scope. Four-port Ethernet connectivity on the rear of the panel ensures that no additional network equipment is required and that the unit will integrate seamlessly into the most challenging live production applications.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe unit features a wide array of colour backlit buttons, including 30 input buttons, and it has buttons for controlling up to four upstream and four downstream keyers as well as four M\/E rows. A dynamic 3-axis joystick and an ergonomically designed T-bar facilitate precise, real-time DVE control with the T-bar, providing targeted adjustment prowess for wipes, fades, and other broadcast-quality transitions. In addition to allowing you to create adjustable auto transitions, the panel has a dedicated preview transition button and a single-button Fade to Black option that is applicable to the entire output, all at once.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMains power is provided via an optional power cord connected to the IEC input, which also offers a second input option for redundant power. A built-in USB-C port is included for firmware updates. The compact panel design allows the unit to fit in standard equipment racks, so that it may be easily integrated in fly-away kits or broadcast trucks.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSwitching Features\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003e30 direct crosspoints\u003c\/li\u003e\n\u003cli\u003e60 shifted crosspoints\u003c\/li\u003e\n\u003cli\u003eTri-colour LED crosspoint buttons\u003c\/li\u003e\n\u003cli\u003e3 LCD menu displays\u003c\/li\u003e\n\u003cli\u003e2 destination bus\u003c\/li\u003e\n\u003cli\u003e2 source select bus\u003c\/li\u003e\n\u003cli\u003eNumeric keypad\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":47907885187349,"sku":"SWPANELADV1ME30","price":8495.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1694704531_1787640.jpg?v=1705566173"},{"product_id":"rode-rodecaster-duo-integrated-audio-production-studio","title":"Rode RODECaster Duo Integrated Audio Production Studio","description":"\u003ch4 data-mce-fragment=\"1\"\u003eEverything You Need to Sound Spectacular\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe RØDECaster Duo is the world's most powerful all-in-one audio production solution. Condensing a complete professional broadcast studio into a compact and intuitive console, it gives you everything you need to sound spectacular, whether you're podcasting, streaming or creating any kind of content. Loaded with cutting-edge next-gen features and supercharged by a high-performance quad-core audio engine, this is all you need to produce exceptional content.\u003c\/p\u003e\n\u003ch4\u003eIncredible Audio, Incredibly Easy\u003c\/h4\u003e\n\u003cp\u003eThe RØDECaster Duo is incredibly simple to navigate with its large high-definition touchscreen, tactile rotary encoder and broadcast-quality faders giving you hands-on control over every aspect of your sound. Get your project set up in seconds, and with professionally tailored presets and our intuitive VoxLab™ processing editor, you can dial in your perfect sound with the tap of button or twist of a knob. It’s never been easier to create amazing content.\u003c\/p\u003e","brand":"Rode","offers":[{"title":"Default Title","offer_id":47968212975893,"sku":"RCDUO-I","price":829.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/rode-rodecaster-duo-hero-3-quarter-right-4000x4000-2000x2000-0ae0ac9.png?v=1707208684"},{"product_id":"rode-rodecaster-duo-single-person-podcast-kit","title":"Rode RODECaster Creator Bundle (Single Person Podcast Kit)","description":"\u003cspan\u003eUnlock the full potential of your podcasting journey with the Rode RODECaster Duo Single Person Podcast Kit. Designed for solo podcasters seeking professional-grade audio quality and effortless production, this comprehensive kit includes everything you need to create engaging and immersive podcasts with ease. At its heart lies the Rode RODECaster Pro, a revolutionary podcast production studio that combines advanced audio processing, intuitive controls, and versatile connectivity options. With its user-friendly interface and powerful features like onboard recording, sound effects pads, and smartphone integration, the RODECaster Pro empowers you to produce polished podcasts with professional sound quality, no matter where you are. Paired with the Rode PodMic dynamic microphone, renowned for its broadcast-quality sound and robust build, and high-quality headphones for accurate monitoring, this kit delivers exceptional audio performance and reliability. Whether you're a seasoned podcaster or just starting out, the Rode RODECaster Duo Single Person Podcast Kit is your all-in-one solution for creating captivating content and taking your podcast to the next level.\u003c\/span\u003e","brand":"Rode","offers":[{"title":"Default Title","offer_id":48014287569173,"sku":"CE-PODCAST1","price":1599.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/rode-single-image-02.jpg?v=1708665886"},{"product_id":"rode-rodecaster-duo-two-person-podcast-kit","title":"Rode RODECaster Podcaster Bundle (Two-Person Podcast Kit)","description":"\u003cspan\u003eIntroducing the Rode RODECaster Duo Two-Person Podcast Kit, the ultimate solution for creating dynamic and professional-grade podcasts with a partner. This comprehensive kit equips you with all the tools you need to produce high-quality audio content effortlessly, whether you're recording interviews, discussions, or co-hosted shows. At the heart of the kit is the Rode RODECaster Pro, a cutting-edge podcast production studio that revolutionizes the podcasting experience with its intuitive interface and advanced features. With the RODECaster Pro's versatile connectivity options, onboard recording capabilities, and built-in sound effects pads, you can easily manage multiple audio sources, add jingles and effects, and create a seamless podcasting experience for your audience. Paired with two Rode PodMics, renowned for their broadcast-quality sound and durable construction, and high-quality headphones for precise monitoring, this kit ensures exceptional audio performance and clarity for both hosts. Whether you're a seasoned podcaster or just starting out, the Rode RODECaster Duo Two-Person Podcast Kit empowers you to unleash your creativity, collaborate effortlessly, and elevate your podcast to new heights.\u003c\/span\u003e","brand":"Rode","offers":[{"title":"Default Title","offer_id":48014287733013,"sku":"CE-PODCAST2","price":2299.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/rode-duo-image-02.jpg?v=1708665991"},{"product_id":"rode-rodecaster-duo-four-person-podcast-kit","title":"Rode RODECaster Pro II Four-Person Podcast Kit (Ultimate Podcaster Bundel)","description":"\u003cspan\u003eIntroducing the Rode RODECaster Duo Four-Person Podcast Kit, designed to meet the needs of collaborative podcasting ventures with its comprehensive set of tools and accessories. This all-in-one kit provides everything you need to produce professional-grade podcasts with up to four hosts, ensuring seamless recording sessions and exceptional audio quality. At its core lies the Rode RODECaster Pro, a state-of-the-art podcast production studio renowned for its intuitive interface and advanced features. With the RODECaster Pro's versatile connectivity options, onboard recording capabilities, and integrated sound effects pads, you can effortlessly manage multiple audio sources, incorporate jingles and effects, and create engaging content for your audience. Paired with four Rode PodMics, renowned for their broadcast-quality sound reproduction and robust build, and high-fidelity headphones for precise monitoring, this kit delivers outstanding audio performance and clarity for every host. Whether you're conducting interviews, hosting discussions, or producing co-hosted shows, the Rode RODECaster Duo Four-Person Podcast Kit empowers you to collaborate effectively, unleash your creativity, and elevate your podcasting experience to new heights.\u003c\/span\u003e","brand":"Rode","offers":[{"title":"Default Title","offer_id":48014288584981,"sku":"CE-PODCAST4","price":3999.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/rode-quad-02.jpg?v=1708666078"},{"product_id":"rode-rodecaster-pro-ii-integrated-podcast-production-console-white","title":"Rode RODECaster Pro II Integrated Podcast Production Console (White)","description":"\u003cp\u003eSmartly designed for more than podcasting, the Rode RODECaster Pro II integrated audio production studio expands on the success of its predecessor with enhancements in sound, connectivity, and adaptability, pushing its feature set into attractive territory for live streamers, gamers, and musically inclined content creators. This all-in-one solution makes advanced effortless with fluid workflows via a large touchscreen and tactile controls, studio-quality onboard processing, multitrack recording and mixing, assignable sound pads, and extensive customization. Produce and mix on the fly in just moments, with up to four microphones, music, pre-recorded segments, and remote guests on calls, all going on at once.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVersion II Upgrades\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePremium boutique-class preamps with a ground-up redesign and mic\/line\/instrument combo inputs\u003c\/li\u003e\n\u003cli\u003eCustomizable mixer with RGB color coding\u003c\/li\u003e\n\u003cli\u003eExtensively programmable SMART pads for launching sounds, shows, mixer actions, and more\u003c\/li\u003e\n\u003cli\u003eiOS-ready dual USB Type-C ports to connect multiple computers or mobile devices\u003c\/li\u003e\n\u003cli\u003eAdvanced high-quality Bluetooth input\/output, Wi-Fi, and Ethernet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e4 High-End Preamps\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt to compete with pricey, boutique microphone preamplifiers, the Revolution preamps deliver transparency and detail with ultralow noise (just -131.5 dBV) and incredible gain up to 76 dB, which enables ideal recording levels, even for low-output dynamic mics—no mic boosters, lifters, or normalization needed.\u003c\/li\u003e\n\u003cli\u003ePro-grade Neutrik XLR-1\/4\" combo jacks provide connection points for microphones (+48V phantom power is available for condenser mics), line-level sources, or instruments such as electric guitar and bass. Pairs of the analog input channels can be linked to easily record stereo mic setups, synths, DJ mixers, or outboard gear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStudio-Quality Processing and Effects\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAuthentic emulations of classic APHEX hardware processors are onboard—Aural Exciter elevates clarity and sheen, Big Bottom adds warm and deep low-frequency punch, and Compellor glues it all together with compression\/leveling—as well as other widely used processors including a reverb, delay, pitch shifter, equalizer, high-pass filter, noise gate, de-esser, robot effects, and more.\u003c\/li\u003e\n\u003cli\u003eUse the VoxLab editor to quickly manipulate parameters on several processors via three intuitive controls, or access the advanced editor (on-screen or with a computer) for intricate editing. Use presets, save your own presets, and load them at any time to immediately call up your favorite settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e8 Programmable SMART Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIn place of the original model's sound pads, the RODECaster Pro II has programmable SMART pads. Each SMART pad can trigger audio files such as music or sound bites, activate special effects, send MIDI commands to software or hardware, or execute mixer functions like fades, music ducking, and bleeping.\u003c\/li\u003e\n\u003cli\u003eBank switching buttons beneath the pads allow easy access to eight banks for a total of 64 unique actions.\u003c\/li\u003e\n\u003cli\u003eSelect the color of your choice for the pad illumination, a convenient way to remember which effect is on which pad.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCustomizable Multichannel Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe 9-channel mixer features 6 channels with full-size broadcast-quality physical faders and three virtual channels, with the option to expand via digital hosting and hardware integrations with future updates.\u003c\/li\u003e\n\u003cli\u003ePhysical faders and virtual channels are freely assignable to the four analog inputs, USB and Bluetooth interfaces, and SMART pads.\u003c\/li\u003e\n\u003cli\u003eEach channel offers a pan control, mute button, and listen button (pre- or after-fader solo). With channel-specific color coding on the RODECaster Pro II, you're assured fast identification of your sources.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStereo or Multitrack Recording\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecord stereo or individual multitrack files to a microSD card or USB storage such as an external drive.\u003c\/li\u003e\n\u003cli\u003eChoose uncompressed WAV format for maximum audio quality or MP3 format to save storage space and extend recording time.\u003c\/li\u003e\n\u003cli\u003eUse the RODECaster Pro II as a high-quality USB audio interface to stream\/record to a computer with ultrafast data transfer.\u003c\/li\u003e\n\u003cli\u003eRODECaster Pro II runs at 24-bit \/ 48 kHz, the industry standard for video production.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMonitoring for All\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour high-powered 1\/4\" headphone outputs provide clear personal monitoring for the host and up to three guests.\u003c\/li\u003e\n\u003cli\u003eSeparate color-coded volume controls let all participants easily control their own headphone levels.\u003c\/li\u003e\n\u003cli\u003eConnect a pair of active speakers to the 1\/4\" line outputs if you need to amplify your content to a live audience, or go wireless and monitor through a Bluetooth speaker to check the mix on an alternate system.\u003c\/li\u003e\n\u003cli\u003eSelectable high or low sensitivity optimizes the gain structure of the headphone outputs, so you can set headphone levels easier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePodcast-Friendly Specialties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProducer talkback mode lets you communicate with guests without affecting the recording.\u003c\/li\u003e\n\u003cli\u003eEquipped with advanced Bluetooth connectivity, the RODECaster Pro II can be used for ultrahigh-quality phone-call integration, crystal-clear audio streaming, wireless monitoring, and more.\u003c\/li\u003e\n\u003cli\u003eMix-minus on the Bluetooth and USB channels prevents the person on the other end of the call from hearing a distracting echo, making the RODECaster Pro II great for remote and local guests in your podcast.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFast Workflow\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSave multiple Shows containing all of the RODECaster Pro II's settings, an ideal way to instantly switch between types of productions such as podcasts, live streams, and game commentary.\u003c\/li\u003e\n\u003cli\u003eTailored presets for Rode microphones and other popular models help you get great sounds in a hurry.\u003c\/li\u003e\n\u003cli\u003eThe 5.5\" color touchscreen with haptic feedback and automatic brightness adjustment, and tilted for optimal viewing. Next to the touchscreen, a rotary encoder is placed for efficient navigation and control.\u003c\/li\u003e\n\u003cli\u003eDual USB Type-C interfaces allow two computers or mobile devices to be connected simultaneously, unlocking great options for everything from remote podcasting to organizing complex streaming setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn internal 1.5 GHz quad-core audio engine delivers significant processing power and unlocks huge potential for future updates.\u003c\/li\u003e\n\u003cli\u003eBidirectional MIDI communication allows excellent integration with DAWs and streaming software.\u003c\/li\u003e\n\u003cli\u003eWi-Fi and Ethernet connections offer high-speed communication with computers and other devices for updating firmware wirelessly, software and hardware integrations, and more.\u003c\/li\u003e\n\u003cli\u003eThe USB connections are MFi-certified for seamless integration with iOS devices such as iPads.\u003c\/li\u003e\n\u003cli\u003ePower the RODECaster Pro II via the included AC adapter or through USB Type-C PD (30W).\u003c\/li\u003e\n\u003cli\u003eReady for global use, the unit has 10 languages—English, Chinese, Japanese, Korean, French, German, Italian, Spanish, Portuguese, and Hindi.\u003c\/li\u003e\n\u003cli\u003eRODECaster Pro II is fully updatable for continued evolution with new firmware that will be available to all users via Wi-Fi, Ethernet, or USB.\u003c\/li\u003e\n\u003cli\u003eProtect your RODECaster Pro II with the optional RODECover II, a tough polycarbonate cover that guards it against debris, dust, and spills.\u003c\/li\u003e\n\u003cli\u003eMounting options include a 3\/8\" female thread for various stand types and VESA mounting holes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Rode","offers":[{"title":"Default Title","offer_id":48374240346389,"sku":"RCPIIW-I","price":1149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/web-image-02_b2a79c3d-3777-41fc-8f8c-789f44ea25e5.jpg?v=1743327099"},{"product_id":"rode-rodecaster-video-all-in-one-production-console","title":"RODE RODECaster Video All-in-One Production Console","description":"\u003cp\u003e\u003cstrong\u003eVideo Interface\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe RODECaster Video features nine mix-effect layers that can simultaneously display in both preview and program views. Two downstream keyers toggle overlays and logo, two chroma-keyers toggle different backgrounds, and two media players can play simultaneous MP4 video, PNG\/JPG photos, or WAV audio from an inserted microSD card.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMultiview allows you to visualize both the program and preview, all the live inputs with scene and media thumbnails, the audio mixer and channel status, recording\/network\/storage status as well as runtime, date, and time information.\u003c\/li\u003e\n\u003cli\u003eNon-destructive setup means the process can be done live or configured as a saved scene without interrupting the flow of your production.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSwitch between six 1080p60 video sources—four HDMI and two USB-C—and create up to seven complex scenes with multiple layers of video, media, and graphics. Save these scenes and recall them with the touch of a button.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfigure the two HDMI outputs to connect displays and view preview, program, and multiview feeds. Use the program feed to see what is being streamed\/recorded and the preview feed to view inputs, scenes, graphics, or media sources before they go live.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAudio Sources\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo studio-grade combo XLR-1\/4\" jacks on the console are equipped with low-noise, high-gain Revolution Preamps to ensure pristine audio capture from XLR microphones and instruments.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse digital USB-C ports to connect RODE USB microphones, the RODECaster Pro II, or Duo Audio Production Studios. Other USB-C ports support 2-in\/2-out multichannel outputs, mix-minus, and MFi protocols.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInternal wireless receivers can connect RODE series IV wireless microphones to the console, like the Wireless GO II and Wireless PRO.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAphex VoxLab audio processing equips the RODECaster Video with EQ, compressor, noise gate, high-pass filter, de-esser, Aural Exciter, Big Bottom, and\u003c\/li\u003e\n\u003cli\u003eCompellor effects per channel. Integrated preamps provide up to 75 dB input gain and -131.5 dBV equivalent input noise.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMix and process audio onboard using the touchscreen and rotary encoder or the software mixer in RODE Central.\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIntuitive Controls\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe RODECaster Video prioritizes scene-based switching with an intuitive control layout. This gives users quicker access to the tools they need to create dynamic content without needing to access complicated settings. The front panel of the device includes a wide variety of controls specific to certain features.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAutomatic chroma keying makes replacing backgrounds with media or live video inputs a breeze. Apply transparency to use the input in scenes or with various backgrounds. Choose between blue and green screen with advanced controls.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSeven media buttons load video clips, images, and sounds onto a microSD card for use in your production. Two internal video players allow you to transition from one to another in your scene compositions.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSeven graphic buttons load images with transparency. Dynamically trigger graphics to transition over an input or scene.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect Button\u003c\/strong\u003e\u003cbr\u003eWhen pressed, the Inspect feature gives you a detailed snapshot of what video input is assigned to it as well as media, graphics, and layout information on the integrated screen. Preview the button in your Multiview while maintaining the ability to instantly switch between sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntelligent Auto-Switching\u003c\/strong\u003e\u003cbr\u003eThe RODECaster Video's intelligent auto-switching makes for seamless and creative hands-free switching between video sources. Any audio input can be linked to any video source, allowing intelligent level detection to automatically trigger switching when your talent is speaking to follow the conversation. Switching priorities and screen time algorithms give it a natural feel as if a producer or technical director were calling the shots.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntuitive Streaming and Recording\u003c\/strong\u003e\u003cbr\u003eStream up to 100 Mb\/s directly using RTMP to major platforms like YouTube, Twitch, and Facebook Live via integrated Wi-Fi 6 or Ethernet connection. Real-time signal health reporting is displayed on your multiview. Record directly to an external USB storage device, including isolated (ISO) recording for more flexible postproduction workflows. You can record your program feed as an H.264\/AVC MP4 file with embedded AAC stereo mix. Multiple audio tracks can be recorded as nine independent stereo WAV files.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRODE Central\u003c\/strong\u003e\u003cbr\u003eUse the RODE Central companion software when connected to a computer to adjust more advanced features of the RODECaster Video. Construct scenes using remote control, configure automatic switching based on audio inputs, mix audio, and configure streaming settings and profiles as well as adjust advanced settings and customizations. The software supports macOS and Windows operating systems.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustom Scene Builder\u003c\/strong\u003e\u003cbr\u003eThe scene builder in RODE Central allows you to create a completely customized scene from scratch. Select a RODE preset with default layouts and themes for your keying backgrounds or video borders. A live RTMP feed will update to show your changes in real-time.\u003c\/p\u003e","brand":"Rode","offers":[{"title":"Default Title","offer_id":48552356151573,"sku":"RCV-I","price":1979.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/rode-rodecaster-video-top-down-5120x3200-rgb.png?v=1743327120"},{"product_id":"blackmagic-atem-television-studio-hd8-iso","title":"Blackmagic ATEM Television Studio HD8 ISO","description":"\u003cdiv class=\"subtitle-container\"\u003e\n\u003ch4\u003eATEM\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"br-md\"\u003e\u003c\/span\u003eTelevision\u003cspan class=\"br-md br-lg\"\u003e\u003c\/span\u003eStudio HD8 ISO\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp\u003ePowerful ISO model includes all the features of ATEM Television Studio HD\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nb-lg\"\u003eplus adds\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eISO recording of all 8 inputs\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nb-lg\"\u003eand supports\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eup to 8 remote cameras\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nb-lg\"\u003ewith control\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eand tally for each camera!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe new ATEM Television Studio is a professional live production switcher built into a broadcast control panel so it can be used for high end work while being extremely portable. This means you can use it in small venues that don't have the access for equipment racks or broadcast vans. You get a powerful switcher with 8 standards converted SDI inputs, aux outputs, 4 chroma keyers, 2 downstream keyers, SuperSource, 2 media players and lots of transitions! Plus it includes a whole television studio of features such as hardware streaming, recording, audio mixer, talkback, multiview and optional internal network shared storage. There's even an ISO model that records all 8 inputs for editing!\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"col-xs-12 col-sm-10 col-md-12 txt-left-xs txt-center-md\"\u003e\n\u003cdiv class=\"title-container\"\u003e\n\u003ch2\u003eSelf Contained\u003cspan class=\"br-md br-lg\"\u003e\u003c\/span\u003eBroadcast Quality Switcher\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12 col-sm-10 col-md-12\"\u003e\n\u003cdiv class=\"text-container autocolumns-md txt-left-xs\"\u003e\n\u003cp\u003eThe ATEM Television Studio combines a switcher and control panel into the same unit, so it’s extremely portable. You get everything you need! The front panel includes buttons for selecting sources, triggering transitions and setting up video effects. Plus the buttons are the same high-end type used on expensive broadcast switchers! You also get a built in t-bar for manual transition control! The front panel even has an innovative audio mixer control area with live metering on a dedicated LCD. There are also buttons for recording and streaming control, plus live aux switching that lets you change aux outputs between all 8 cameras, program, preview or the multiview.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12 col-sm-10 col-md-12 txt-left-xs txt-center-md\"\u003e\n\u003cdiv class=\"title-container\"\u003e\n\u003ch2\u003eConnect up to\u003cspan class=\"br-md br-lg\"\u003e\u003c\/span\u003e8 Broadcast Cameras\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12 col-sm-10 col-md-12\"\u003e\n\u003cdiv class=\"text-container back autocolumns-md txt-left-xs\"\u003e\n\u003cp\u003eWith 8 SDI video inputs, ATEM Television Studio lets you connect multiple cameras for different views of the performance. Video cameras with SDI outputs, such as Blackmagic Studio Camera or Blackmagic URSA Broadcast G2, are much better quality as they have better low light performance and use professional lenses. All video sources will re-sync to the switcher, even if they operate at different video standards. Everything just works so setup on location is easy and you don't have to worry about technical problems. Imagine taking advantage of the creative freedom of multi camera live production for interviews, advertorials, theater productions, music performances, sports and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Blackmagic Design","offers":[{"title":"Default Title","offer_id":49774854045973,"sku":"SWATEMTVSTC\/HD08ISO","price":6225.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1677164151_1753950.jpg?v=1684916780"}],"url":"https:\/\/www.cameraelectronic.live\/collections\/monitoring-production-consoles.oembed","provider":"Camera Electronic","version":"1.0","type":"link"}