{"title":"Bags \u0026 Cases -\u003e Hard Cases","description":"","products":[{"product_id":"pelican-1485-air-compact-hand-carry-case-with-pick-n-pluck-foam-black","title":"Pelican 1485 Air Compact Hand-Carry Case with Pick-N-Pluck Foam (Black)","description":"\u003cp\u003eCombining strength and lightness, the black\u003cstrong\u003e Pelican 1485Air Compact Hand-Carry Case\u003c\/strong\u003e with \u003cstrong\u003ePick-N-Pluck Foam\u003c\/strong\u003e is watertight, crushproof, dustproof, and optimised for travel. For travel by air, Pelican has aggregated available airline rules for maximum overhead and check-in dimensions, with the goal of creating a case that conforms to their requirements. It is always recommended to contact your carrier before departing.\u003c\/p\u003e\r\n\r\n\u003cp\u003eYour 1485Air case is made of a super-light proprietary HPX polymer, with honeycomb structural elements, which is up to 40% lighter than most other Pelican polymers. This confidence-inspiring design has been drop-tested on concrete on all sides and corners while loaded with gear. Not content with stopping there, the case has also been tested with a 28 lb steel dart dropped from a height of three feet.\u003c\/p\u003e\r\n\r\n\u003cp\u003eFully featured, the case has ABS double-throw latches that accept a user-supplied padlock, a watertight O-ring gasket, an automatic purge valve, and stainless steel hasp protectors. Users will appreciate the stylish conic curve lid shape and rubber overmoulded handle. And for easier case ID, there's an attractive and removable polycarbonate card holder that may be placed on the front or side of the case.\u003c\/p\u003e\r\n\r\n\u003cp\u003eOrganising equipment is an easy and straightforward operation with the Pick-N-Pluck foam interior. Simply arrange the gear you wish to carry on the foam, try a variety of placements, and remove pieces of foam until items fit to your satisfaction.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44574404968725,"sku":"1485AIRBG2","price":429.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/pelican-air-1485-black-air-camera-case.jpg?v=1680165687"},{"product_id":"pelican-1525-airtp-carry-on-case-with-pick-n-pluck-foam-black","title":"Pelican 1525 AirTP Carry-On Case with Pick-N-Pluck Foam (Black)","description":"\u003cp\u003eCombining strength and lightness, the black \u003cstrong\u003ePelican 1525AirTP Carry-On Case\u003c\/strong\u003e with \u003cstrong\u003ePick-N-Pluck Foam \u003c\/strong\u003eis watertight, crushproof, dustproof, and optimised for travel. For travel by air, Pelican has aggregated available airline rules for maximum overhead and check-in dimensions with the goal of creating a case that conforms to their requirements. Of course, there will always be exceptions, so it's wise to contact your carrier before departing.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe 1525AirTP case is made of a super-light, proprietary HPX polymer with honeycomb structural elements that is up to 40% lighter than most other Pelican polymers. This confidence-inspiring design has been drop-tested on concrete on all sides and corners while loaded with gear. Not content to stop there; the case is also tested with a 28 lb steel dart dropped from a height of 3-feet.\u003c\/p\u003e\r\n\r\n\u003cp\u003eFully-featured, the case has ABS double-throw latches that accept a user-supplied padlock, a watertight o-ring gasket, an automatic purge valve, and stainless steel hasp protectors. Users will appreciate the new, stylish conic curve lid shape and rubber overmoulded handle. Additionally, for easier case ID, there's an attractive, removable polycarbonate card holder that may be placed on the front or side of the case.\u003c\/p\u003e\r\n\r\n\u003cp\u003eOrganising equipment is an easy and straightforward operation with the Pick-N-Pluck foam interior. Simply arrange the gear you wish to carry on the foam, try a variety of placements, and when you're satisfied, remove pieces of foam until items fit to your satisfaction.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44574405230869,"sku":"1525AIRBG2","price":449.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/pelican-air-cases-1525-watertight-case.jpg?v=1680165698"},{"product_id":"pelican-1535-air-hard-case-with-pick-n-pluck-foam-black","title":"Pelican 1535 Air Hard Case with Pick-N-Pluck Foam (Black)","description":"\u003cp\u003eCombining strength and lightness, the black \u003cstrong\u003ePelican 1535 Air Wheeled Carry-On Case\u003c\/strong\u003e with \u003cstrong\u003ePick-N-Pluck Foam\u003c\/strong\u003e is watertight, crushproof, dustproof, and optimised for travel. For travel by air, Pelican has aggregated available airline rules for maximum overhead and check-in dimensions with the goal of creating a case that conforms to their requirements. Of course there will always be exceptions, so it's wise to contact your carrier before departing.\u003c\/p\u003e\r\n\r\n\u003cp\u003eYour 1535 Air case is made of a super-light, proprietary HPX polymer with honeycomb structural elements that is up to 40% lighter than most other Pelican polymers. This confidence-inspiring design has been drop-tested on concrete on all sides and corners while loaded with gear. Not content to stop there; the case is also tested with a 28 lb steel dart dropped from a height of 3 feet, submerged for 30 minutes at a depth of 3.3 feet, and wheels are roll tested over 1,000 yards with loads at 5 mph.\u003c\/p\u003e\r\n\r\n\u003cp\u003eFully-featured, the case has ABS double-throw latches that accept a user-supplied padlock, a watertight O-ring gasket, an automatic purge valve, and stainless steel hasp protectors. Users will appreciate the new, stylish conic curve lid shape, rubber overmoulded handles, and an extending trolley handle. Additionally, for easier case ID, there's an attractive, removable polycarbonate card holder that may be placed on the front or side of the case.\u003c\/p\u003e\r\n\r\n\u003cp\u003eOrganising equipment is an easy and straightforward operation with the Pick-N-Pluck foam interior. Simply arrange the gear you wish to carry on the foam, try a variety of placements, and when you're satisfied, remove pieces of foam until items fit to your satisfaction.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44574405853461,"sku":"1535AIRTRVLB","price":739.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/pelican-1535-air-carry-on-travel-case.jpg?v=1680165730"},{"product_id":"pelican-1605-protector-air-case-with-foam-insert-black","title":"Pelican 1605 Protector Air Case with Foam Insert (Black)","description":"\u003cp\u003eCombining strength and lightness, the black \u003cstrong\u003ePelican 1605 Protector Air Case with Pick-N-Pluck Foam\u003c\/strong\u003e is watertight, crushproof, dustproof, and optimised for travel. For travel by air, Pelican has aggregated available airline rules for maximum overhead and check-in dimensions with the goal of creating a case that conforms to their requirements. Of course, it is always recommended to contact your carrier before departing.\u003c\/p\u003e\r\n\r\n\u003cp\u003eYour 1605 case is made of a super-light proprietary HPX polymer, with honeycomb structural elements, which is up to 40% lighter than most other Pelican polymers. This confidence-inspiring design has been drop-tested on concrete on all sides and corners while loaded with gear. Not content to stop there, the case has also been tested with a 28 lb steel dart dropped from a height of three feet.\u003c\/p\u003e\r\n\r\n\u003cp\u003eFully featured, the case has ABS double-throw latches that accept a user-supplied padlock, a watertight O-ring gasket, an automatic purge valve, and stainless steel hasp protectors. Users will appreciate the stylish conic curve lid shape and rubber overmoulded handle. And for easier case ID, there's an attractive and removable polycarbonate card holder that may be placed on the front or side of the case.\u003c\/p\u003e\r\n\r\n\u003cp\u003eOrganising equipment is easy and straightforward with the Pick-N-Pluck foam interior. Simply arrange the gear you wish to carry on the foam, try a variety of placements, and remove pieces of foam until items fit your satisfaction.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44574406115605,"sku":"1605AIRBG2","price":659.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1597858327_img_1405398.jpg?v=1680165742"},{"product_id":"think-tank-photo-airport-takeoff-v2-0-rolling-camera-bag-black","title":"Think Tank Photo Airport TakeOff v2.0 Rolling Camera Bag (Black)","description":"\u003cp\u003eStore, protect, and transport up to 3 DSLR cameras, 5 lenses, a flash, and related accessories with the black\u003cstrong\u003e Airport TakeOff V2.0 Rolling Camera Bag\u003c\/strong\u003e from \u003cstrong\u003eThink Tank\u003c\/strong\u003e. The spacious main compartment has padded, touch-fastening dividers for organising your gear. Depending upon how you configure this compartment, there's room for a 400mm f\/2.8 select lens. The bag will also accommodate select laptops up to 17 inch, and a 10 inch iPad\/tablet. Adjustable straps and pouch on the side of the bag can secure a compact tripod\/monopod, or other item. Interior and exterior pockets provide convenient places to store accessories and gear requiring fast access.\u003c\/p\u003e\u003cp\u003eFor security, the bag includes a cable and lock that attach to lockable zippers. Tall skid plates help protect the back and bottom of the bag from moisture and abrasion. This protection is complemented by water-repellent, coated fabrics, 1680D ballistic nylon, and YKK RC Fuse zippers. Carry your Airport TakeOff V2.0 with the top and left side grab handles or roll with the retractable, telescoping handle and smooth 80mm, sealed ABEC, quiet-rolling wheels. Bottom feet opposite the wheels allow the bag to balance upright. The bag may also be worn as a backpack with tuck-away straps located under the rear panel covering. Included with the bag is a rain cover with its own storage pouch.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHolds up to two pro or regular size DSLR bodies with or without lenses attached\u003c\/li\u003e\n\u003cli\u003eHolds up to 400mm f\/2.8 (tight with lens cap) and other assorted lenses\u003c\/li\u003e\n\u003cli\u003eThe TakeOff can carry regular size DSLRs across the top of the bag and\/or pro size DSLRs along the sides\u003c\/li\u003e\n\u003cli\u003eQuickly deployable\/tuck-away backpack straps; the rear panel covering can be easily zipped open or shut to hide or expose the backpack straps\u003c\/li\u003e\n\u003cli\u003eA tripod or monopod can be carried on the side of the Airport TakeOff V2.0 by using the straps and tripod cup included with the bag\u003c\/li\u003e\n\u003cli\u003eA monopod can be carried in the stretchable side pocket and stabilised near the top of the bag with the included monopod strap\u003c\/li\u003e\n\u003cli\u003eCable and combination lock are included for securing the lockable zippers. The cable and lock for your laptop are inside the clear pocket underneath the front flap of the bag. The optional Artificial Intelligence 15 fits in the bag's front pocket\u003c\/li\u003e\n\u003cli\u003eThe bag features dual wheels; open the zipper flap on top of the Airport TakeOff to reveal the extendable handle that is used when the wheels are employed\u003c\/li\u003e\n\u003cli\u003eLockable zipper sliders\u003c\/li\u003e\n\u003cli\u003eCompatible with Think Tank Artificial Intelligence 15 and 17 laptop case\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCarry-On Form Factor\u003c\/strong\u003e\u003cbr\u003eFAA and airline carry-on specifications are subject to change without notice, please check with your airline before designating this case as a carry-on item. Most airlines require carry-on items to have an external linear measurement that is equal to or less than 45.0 inch (114.3 cm). The external dimensions of this case add up to 43.0 inch (109.2 cm)\u003c\/p\u003e","brand":"Think Tank","offers":[{"title":"Default Title","offer_id":44576691486997,"sku":"TT499","price":729.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/9_34_6.jpg?v=1680197523"},{"product_id":"think-tank-photo-airport-essentials-backpack-small-black","title":"Think Tank Photo Airport Essentials Backpack (Small \/ Black)","description":"\u003cp\u003eThe small black \u003cstrong\u003eAirport Essentials Backpack\u003c\/strong\u003e from \u003cstrong\u003eThink Tank\u003c\/strong\u003e makes a photographer's life easy since on the outside, it resembles an ordinary piece of luggage while the inside speaks differently. The pack is rated to hold your standard DSLR, 4-6 basic zooms plus your iPad and 13 inch laptop. It's sized to handle your 300mm f\/2.8 so if you're a nature or sports shooter, you're covered.\u003c\/p\u003e\u003cp\u003eThink Tank has designed this bag both for functionality and security since it comes with a security cable and lock that can be tied to a reception hall column or fence leaving you to remove your gear while the rest of the pack stays safely tethered. Even the strong YKK zippered sliders accept user-supplied locks for maximum protection and peace of mind while on the job. Inside, padded movable dividers allow you to arrange the guts of the bag in whatever way you choose. Your computers are stored in their own, separate lockable, zippered compartment. For even more flexibility and security, you can store your optional Artificial Intelligence Laptop case within the computer pocket.\u003c\/p\u003e\u003cp\u003eYou have multiple ways of carrying the pack from its adjustable harness system and removable waist belt to the very convenient handles situated on three sides. The harness has enhanced lumbar support and air mesh panelling that will help keep you cool while the pack is on your back. And no need to worry about getting caught in bad weather since the pack is supplied with a neat rain cover that stores inside when not needed. A sternum strap is also provided to help maintain balance while walking. The Airport Essentials also accepts Think Tank's optional Pro Speed Belt or Thin Skin Belt that will assist with stability as well as increased load capacity.\u003c\/p\u003e\u003cp\u003eYour tripod can be secured to the pack with its feet in a supplied exterior pocket and head tied with a supplied strap. For small accessories, the inside flap has laminated mesh pockets for everything from memory cards to a snack.\u003c\/p\u003e\u003cp\u003eThe exterior of the pack is made from a combination of ballistic nylon, polyester and nylon webbing all treated for water-resistance. The inside is nylon and polyurethane with padded, closed cell foam dividers. For a small pack that holds this much gear, it's relatively lightweight at a maximum of 3.6 lb. Think Tank backs the Airport Essentials with a lifetime warranty against manufacturer's defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDoes not look like a traditional camera backpack. Included security cable and combination lock allows you to lock the laptop case or to immovable objects. This security cable is very effective when you have to leave your gear for a period of time in a media room, wedding hall, hotel room, or other open area\u003c\/li\u003e\n\u003cli\u003eContoured adjustable harness with lumbar support and Air Mesh panelling to help keep your back cool\u003c\/li\u003e\n\u003cli\u003eRobust handles on three sides ensures rapid and easy retrieval from overhead bins, car trunks\u003c\/li\u003e\n\u003cli\u003eSeam sealed rain cover helps protect your gear. Stows away inside backpack when not in use\u003c\/li\u003e\n\u003cli\u003eCompatible with optional Think Tank Artificial Intelligence Laptop cases\u003c\/li\u003e\n\u003cli\u003eThe inside flap has see-through laminated mesh pockets for various accessories such as note pads, energy bars, memory card wallets, instruction books, and other items\u003c\/li\u003e\n\u003cli\u003eIncludes tripod\/monopod mounting system\u003c\/li\u003e\n\u003cli\u003eYKK RC-Fuse zipper and highest quality materials throughout. Lockable zipper sliders for additional security\u003c\/li\u003e\n\u003cli\u003eThe removable waist belt allows the optional Pro Speed belt or Thin Skin Belt to be used which increases carrying capacity, stability and functionality\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003eStandard DSLR with 4-6 standard zoom lenses. Quick access pockets hold a 13 inch laptop and iPad; holds 13 inch laptop and iPad in a separate, integrated, locking zippered compartment: accommodates a 300mm f\/2.8 lens attached a standard sized camera body\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarry-On Form Factor\u003c\/strong\u003e\u003cbr\u003eFAA and airline carry-on specifications are subject to change without notice, please check with your airline before designating this case as a carry-on item. Most airlines require carry-on items to have an external linear measurement that is equal to or less than 45.0 inch (114.3 cm). The external dimensions of this case add up to 36.5 inch (92.7 cm)\u003c\/p\u003e","brand":"Think Tank","offers":[{"title":"Default Title","offer_id":44577078608149,"sku":"TT483","price":389.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/4_149_84.jpg?v=1680200880"},{"product_id":"think-tank-photo-airport-accelerator-backpack","title":"Think Tank Photo Airport Accelerator Backpack","description":"\u003cp\u003eThe black \u003cstrong\u003eAirport Accelerator Backpack\u003c\/strong\u003e from \u003cstrong\u003eThink Tank\u003c\/strong\u003e is an immense pack designed for the serious pro that needs to carry an entire camera system. This huge pack will accommodate two pro DSLRs as well as 6-8 additional basic zooms including your 500mm f\/4 attached to a body or an unattached 600mm f\/4 without hood. Larger than Think Tank's Airport Commuter, this pack contains the same features but on a larger scale. Your 17 inch laptop and iPad are held in their own separate, zipper lockable compartment.\u003c\/p\u003e\u003cp\u003eOverall, the pack is designed for maximum efficiency and portability and meets the needs of the pro shooter who needs a quick access pack that both travels well and is secure. The exterior is made from a combination of ballistic nylon and polyurethane for strength and water-resistance while the inside is nylon with padded closed cell foam dividers. For security, the Airport Accelerator comes with a security cable and lock that can be tied to any solid object such as a reception hall column or fence. This allows you to remove gear knowing that the rest of the pack will remain where you leave it. The strong YKK zippers on the pack can also be locked with user-supplied locks for even more peace of mind.\u003c\/p\u003e\u003cp\u003eAs part of Think Tank's Airport series, the Airport Accelerator makes your travelling life easy and comfortable. There are carry handles on three sides and the adjustable harness comes with beefed up lumbar support and Air Mesh panelling to keep your back cool while on the march. For sheer convenience, the adjustable shoulder straps even have elastic pockets for your iPhone or business cards. The waist belt is removable and can accept Think Tank's optional Pro Speed Belt or Thin Skin Belt that will make portability more comfortable as well as increase your load capacity. Inside, the main flap has see-through laminated mesh pockets for storing everything from memory cards to snacks.\u003c\/p\u003e\u003cp\u003eFor marginal weather, the pack comes with an easily deployed rain cover. The tripod mounting system places the feet in a side pocket and the head secured with an included strap. While you're on the move, use the side water bottle pocket for instant refreshment without having to stop, remove the entire pack and retrieve liquid. And, when you're at the airport, the top zippered pocket is the perfect place to store your passport.\u003c\/p\u003e\u003cp\u003eThe Airport Accelerator may not look like a traditional photo backpack but it holds as much, if not more, than most of them. With its immense capacity, ease of use and security features, the Airport Accelerator is a pack built for the travelling pro. It's backed by Think Tank's lifetime warranty against manufacturer's defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDoes not look like a traditional camera backpack. Included security cable and combination lock allows you to lock the laptop case or to immovable objects. This security cable is very effective when you have to leave your gear for a period of time in a media room, wedding hall, hotel room, or other open area\u003c\/li\u003e\n\u003cli\u003eContoured adjustable harness with lumbar support and Air Mesh panelling to help keep your back cool\u003c\/li\u003e\n\u003cli\u003eRobust handles on three sides ensures rapid and easy retrieval from overhead bins, car trunks\u003c\/li\u003e\n\u003cli\u003eSeam sealed rain cover helps protect your gear. Stows away inside backpack when not in use\u003c\/li\u003e\n\u003cli\u003eCompatible with optional Think Tank Artificial Intelligence Laptop cases\u003c\/li\u003e\n\u003cli\u003eThe inside flap has see-through laminated mesh pockets for various accessories such as note pads, energy bars, memory card wallets, instruction books, and other items\u003c\/li\u003e\n\u003cli\u003eIncludes tripod\/monopod mounting system\u003c\/li\u003e\n\u003cli\u003eYKK RC-Fuse zipper and highest quality materials throughout. Lockable zipper sliders for additional security\u003c\/li\u003e\n\u003cli\u003eThe removable waist belt allows the optional Pro Speed belt or Thin Skin Belt to be used which increases carrying capacity, stability and functionality\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003eTwo pro DSLR with 6-8 standard zoom lenses. Quick access pockets hold a 17 inch laptop and iPad; holds 17 inch laptop and iPad in a separate, integrated, locking zippered compartment; accommodates a 600mm f\/4 without hood unattached or a 500mm f\/4 with body attached\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarry-On Form Factor\u003c\/strong\u003e\u003cbr\u003eFAA and airline carry-on specifications are subject to change without notice, please check with your airline before designating this case as a carry-on item. Most airlines require carry-on items to have an external linear measurement that is equal to or less than 45.0 inch (114.3 cm). The external dimensions of this case add up to 43.5 inch (110.5 cm)\u003c\/p\u003e","brand":"Think Tank","offers":[{"title":"Default Title","offer_id":44577079099669,"sku":"TT489","price":565.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/4_149_85.jpg?v=1680200893"},{"product_id":"think-tank-photo-streetwalker-rolling-backpack-black","title":"Think Tank Photo StreetWalker Rolling Backpack (Black)","description":"\u003cp\u003eTake your photography gear on the road with the versatile, well-made, black \u003cstrong\u003eStreetWalker Rolling Backpack\u003c\/strong\u003e from \u003cstrong\u003eThink Tank\u003c\/strong\u003e. Inside the spacious, padded, zippered main compartment are touch-fastening dividers for organising a gripped pro DSLR with attached 70-200mm f\/2.8 lens, up to seven additional lenses, a flash, and the included rain cover. Under the lid are clear-mesh zip pockets for accessories. The pack features a zippered laptop compartment for MacBook Pros up to 15 inch and iPad Pros up to 12.9 inch. On the front panel of the pack is a zip pocket for securing two tripod legs and an adjustable strap for the remaining leg. Near the top of the pack is another strap for securing the top section.\u003c\/p\u003e\u003cp\u003eAlso on the exterior pack are front and rear zippered pockets. Dual zippered pockets on either side of the pack have matching stretch pockets for storing a water bottle, gloves, or other gear. On top of the pack are an ID card holder and a padded grip handle. For added security, the YKK zipper pulls can accept a user-supplied, optional padlock.\u003c\/p\u003e\u003cp\u003eThe StreetWalker Rolling Backpack V2.0 is comfortably worn with the padded shoulder strap, and chest connector, or carried with the top handle. There's also a telescoping trolley handle and built-in wheels for rolling. When not needed, the trolley handle is hidden from view beneath a zippered panel. Stretch pockets on the shoulder straps are useful for storing sunglasses or other small items. Above each pocket is a D-ring for attaching a front-mounted camera or other gear. Photographers will greatly appreciate the breathable air-mesh back panel, lumbar support, and cooling air channels. For strength and durability, the pack is constructed from 1680D ballistic nylon, closed-cell PU foam, water-repellent coatings, and antique nickel-plated metal hardware.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReinforced telescoping handle with rubberised touch points\u003c\/li\u003e\n\u003cli\u003eTripod mount on front panel\u003c\/li\u003e\n\u003cli\u003eDedicated smartphone pocket fits today's large phones with a 5.5 inch (14cm) screen size\u003c\/li\u003e\n\u003cli\u003eLockable YKK RC Fuse zipper sliders (lock not included)\u003c\/li\u003e\n\u003cli\u003eTwo water bottle pockets on the side and two side zippered pockets\u003c\/li\u003e\n\u003cli\u003eCustom-designed, high-performance, 80mm wheels with sealed ABEC grade 5 bearings for quiet rolling\u003c\/li\u003e\n\u003cli\u003eUser-replaceable retractable handle, wheels, wheel housings, feet and kick plate extends product life\u003c\/li\u003e\n\u003cli\u003eInterior clear zippered pockets for accessories\u003c\/li\u003e\n\u003cli\u003eOrganiser pocket\u003c\/li\u003e\n\u003cli\u003eHypalon reinforced rear panel for increased durability\u003c\/li\u003e\n\u003cli\u003eShoulder harness pockets, D-rings, daisy chain, and adjustable sternum strap\u003c\/li\u003e\n\u003cli\u003eCompatible with camera support straps (sold separately)\u003c\/li\u003e\n\u003cli\u003eSpecially designed interior to maximise gear for carry-on, meets most U.S. and International airline carry-on requirements, but check with your carrier prior to travelling.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Think Tank","offers":[{"title":"Default Title","offer_id":44577079787797,"sku":"TT497","price":719.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/6_87_31.jpg?v=1680200909"},{"product_id":"think-tank-photo-airport-advantage-roller-sized-carry-on","title":"Think Tank Photo Airport Advantage Roller Sized Carry-On","description":"\u003cp\u003eBring two DSLRs with attached lenses, three to four extra lenses, related accessories, and an up to 15 inch laptop on your next plane trip with the black \u003cstrong\u003eAirport Advantage Roller Sized Carry-On\u003c\/strong\u003e from \u003cstrong\u003eThink Tank\u003c\/strong\u003e. This lightweight and sturdy rolling case is designed to meet airline carry-on requirements. Of course, it's always prudent to check with your carrier prior to departure. Interior padded, touch-fastening dividers are useful for protecting and organising gear. The front of the case has a dedicated laptop compartment. And located inside underneath the lid are a variety of zippered accessory pockets. For easy access, the spacious main compartment unzips on three sides. The main YKK zippers can accept an optional, user-supplied padlock.\u003c\/p\u003e\u003cp\u003eStore your water bottle and tripod in the convenient side pockets. Additional tripod straps are included. A retractable trolley handle, in conjunction with two 80mm, ABEC, grade 5 ball bearing wheels, makes travel over flat ground easy. Grab handles on three sides are for lifting the Airport Advantage in and out of vehicles and overhead bins. An included rain cover with storage pouch helps protect the case from dirt and inclement weather. Quality materials such as water-repellent 420D nylon, closed-cell foam padding, tall skid plates, and reinforced PE board dividers offer strength and durability. Photographers will appreciate the handsome business card holder located on top.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecially designed interior to maximise gear for carry-on in small aircraft, such as commuter and regional jets. Meets U.S. and international airline carry-on requirements – check with your carrier prior to departure\u003c\/li\u003e\n\u003cli\u003eHolds one gripped DSLR with attached lens, one standard size or gripped DSLR with attached lens, three to four additional lenses, a 15 inch laptop, and related accessories\u003c\/li\u003e\n\u003cli\u003eUltra light design weighs only 5.9 lb, keeping your roller under weight restrictions\u003c\/li\u003e\n\u003cli\u003eDedicated laptop pocket fits up to 15 inch laptops in a padded sleeve – storing a laptop may expand exterior dimensions\u003c\/li\u003e\n\u003cli\u003eCustom designed retractable handle with inset channel on aluminium tubing, for added strength and durability\u003c\/li\u003e\n\u003cli\u003eTripod mount and water bottle pocket on side – additional straps included for larger tripods\u003c\/li\u003e\n\u003cli\u003eFits two camera bodies with lenses attached\u003c\/li\u003e\n\u003cli\u003eLockable zipper sliders – with optional, user-supplied locks\u003c\/li\u003e\n\u003cli\u003eInterior zippered pockets for batteries, memory cards, filters, and accessories\u003c\/li\u003e\n\u003cli\u003eUser-replaceable retractable handle, wheels, wheel housings, and front foot extend product life\u003c\/li\u003e\n\u003cli\u003eCustom-designed, high performance 80mm wheels with sealed ABEC grade 5 bearings, for quiet rolling\u003c\/li\u003e\n\u003cli\u003eSeam-sealed rain cover included\u003c\/li\u003e\n\u003cli\u003eHandles on three sides ensure rapid and easy retrieval from overhead bins, car trunks, etc.\u003c\/li\u003e\n\u003cli\u003eReinforced dividers support heavy gear and maintain strength over time\u003c\/li\u003e\n\u003cli\u003eBusiness card holder on top for identification\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Think Tank","offers":[{"title":"Default Title","offer_id":44577080017173,"sku":"TT553","price":539.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/tt553_7.jpg?v=1680200926"},{"product_id":"think-tank-photo-airport-international-v3-0-carry-on","title":"Think Tank Photo Airport International v3.0 Carry-On","description":"\u003cp\u003eBring two DSLRs with attached lenses, two to four extra lenses, related accessories, and an up to 15 inch laptop and 10 inch tablet on your next plane trip with the black \u003cstrong\u003eAirport International V3.0 Carry On\u003c\/strong\u003e from \u003cstrong\u003eThink Tank\u003c\/strong\u003e. This sturdy rolling case is designed to meet most international airline carry-on requirements. Of course, it's always prudent to check with your carrier prior to departure. Interior padded, touch-fastening dividers are useful for protecting and organising gear. The front of the case has an expandable dedicated laptop and tablet compartment with an organiser panel and zip pocket. And located inside underneath the lid are a variety of zippered accessory pockets. For easy access, the spacious main compartment unzips on three sides. One great feature is the stretchable front pocket that serves as a catchall for magazines, small reflectors, and more.\u003c\/p\u003e\u003cp\u003eThe Airport International V3.0 has TSA-approved zipper locks for the main compartment, and a high-strength coated cable and combination lock for the laptop and for securing the case to an immovable object. Store your water bottle and tripod in the convenient side pockets. Additional tripod straps are included. A retractable trolley handle, in conjunction with two 80mm, ABEC, grade 5 ball bearing wheels, makes travel over flat ground easy. Grab handles on three sides are for lifting the Airport Advantage in and out of vehicles and overhead bins. An included rain cover with storage pouch helps protect the case from dirt and inclement weather. Quality materials such as water-repellent 1680D ballistic nylon, closed-cell foam padding, tall skid plates, and reinforced PE board dividers offer strength and durability. Photographers will appreciate the handsome business card holder located on top.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecially designed interior to maximise gear for carry-on, meets most international airline carry-on requirements – check with your carrier prior to departure\u003c\/li\u003e\n\u003cli\u003eHolds two gripped DSLRs with lenses attached, two to four additional lenses, a 15 inch laptop, 10 inch tablet, and related accessories\u003c\/li\u003e\n\u003cli\u003eMaximum Lens Size: 500mm f\/4 detached, or 400mm f\/2.8 attached with hood reversed\u003c\/li\u003e\n\u003cli\u003eDedicated padded laptop and tablet compartments located in a lockable pocket\u003c\/li\u003e\n\u003cli\u003eTSA-approved zipper locks for the main compartment, and a high-strength coated cable and combination lock for the laptop compartment and for securing your bag to an immovable object\u003c\/li\u003e\n\u003cli\u003eCustom designed retractable handle with inset channel on aluminium tubing, for added strength and durability\u003c\/li\u003e\n\u003cli\u003eQuick and easy access to the retractable handle\u003c\/li\u003e\n\u003cli\u003eTripod mount and water bottle pocket on side – additional straps included for larger tripods\u003c\/li\u003e\n\u003cli\u003eExpansive top compartment cradles large camera bodies for the perfect fit\u003c\/li\u003e\n\u003cli\u003eUnique serial number for Lost \u0026amp; Found registration\u003c\/li\u003e\n\u003cli\u003eInterior zippered pockets for batteries, memory cards, filters, and accessories\u003c\/li\u003e\n\u003cli\u003eUser-replaceable retractable handle, wheels, wheel housings, and front foot extend product life\u003c\/li\u003e\n\u003cli\u003eCustom-designed, high performance, 80mm wheels with sealed ABEC grade 5 bearings for quiet rolling\u003c\/li\u003e\n\u003cli\u003eExtra tall wheel housings protect your bag from scrapes and scratches\u003c\/li\u003e\n\u003cli\u003eSeam-sealed rain cover included\u003c\/li\u003e\n\u003cli\u003eStretchable front pocket\u003c\/li\u003e\n\u003cli\u003eHandles on three sides ensure rapid and easy retrieval from overhead bins, car trunks, etc.\u003c\/li\u003e\n\u003cli\u003eReinforced dividers support heavy gear and maintain strength over time\u003c\/li\u003e\n\u003cli\u003eHypalon reinforced rear corners for increased durability\u003c\/li\u003e\n\u003cli\u003eBusiness card holder on top for identification\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Think Tank","offers":[{"title":"Default Title","offer_id":44577083162901,"sku":"TT563","price":845.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/tt563_4.jpg?v=1680200939"},{"product_id":"think-tank-photo-airport-security-v3-0-carry-on","title":"Think Tank Photo Airport Security v3.0 Carry On","description":"\u003cp\u003eBring two DSLRs with attached lenses, two to four extra lenses, related accessories, and an up to 15 inch laptop and 10 inch tablet on your next plane trip with the black \u003cstrong\u003eAirport Security V3.0 Carry On\u003c\/strong\u003e from \u003cstrong\u003eThink Tank\u003c\/strong\u003e. This sturdy rolling case is designed to meet most USA domestic and most international airline carry-on requirements. Of course, it's always prudent to check with your carrier prior to departure. Interior padded, touch-fastening dividers are useful for protecting and organising gear. The front of the case has an expandable dedicated laptop and tablet compartment with an organiser panel and zip pocket. And located inside underneath the lid are a variety of zippered accessory pockets. For easy access, the spacious main compartment unzips on three sides. One great feature is the stretchable front pocket that serves as a catchall for magazines, small reflectors, and more.\u003c\/p\u003e\u003cp\u003eThe Airport Security V3.0 has TSA-approved zipper locks for the main compartment, and a high-strength coated cable and combination lock for the laptop and for securing the case to an immovable object. Store your water bottle and tripod in the convenient side pockets. Additional tripod straps are included. A retractable trolley handle, in conjunction with two 80mm, ABEC, grade 5 ball bearing wheels, makes travel over flat ground easy. Grab handles on three sides are for lifting the Airport Advantage in and out of vehicles and overhead bins. An included rain cover with storage pouch helps protect the case from dirt and inclement weather. Quality materials such as water-repellent 1680D ballistic nylon, closed-cell foam padding, tall skid plates, and reinforced PE board dividers offer strength and durability. Photographers will appreciate the handsome business card holder located on top.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecially designed interior to maximise gear for carry on, meets most U.S. and international airline carry on requirements – check with your carrier prior to departure\u003c\/li\u003e\n\u003cli\u003eHolds two gripped DSLRs with lenses attached, two to four additional lenses, a 15 inch laptop, 10 inch tablet, and related accessories\u003c\/li\u003e\n\u003cli\u003eMaximum Lens Size: 500mm f\/4 detached, or 400mm f\/2.8 attached with hood reversed\u003c\/li\u003e\n\u003cli\u003eDedicated padded laptop and tablet compartments located in a lockable pocket\u003c\/li\u003e\n\u003cli\u003eTSA-approved zipper locks for the main compartment, and a high-strength coated cable and combination lock for the laptop compartment and for securing your bag to an immovable object\u003c\/li\u003e\n\u003cli\u003eCustom designed retractable handle with inset channel on aluminium tubing, for added strength and durability\u003c\/li\u003e\n\u003cli\u003eQuick and easy access to the retractable handle\u003c\/li\u003e\n\u003cli\u003eTripod mount and water bottle pocket on side – additional straps included for larger tripods\u003c\/li\u003e\n\u003cli\u003eExpansive top compartment cradles large camera bodies for the perfect fit\u003c\/li\u003e\n\u003cli\u003eUnique serial number for Lost \u0026amp; Found registration\u003c\/li\u003e\n\u003cli\u003eInterior zippered pockets for batteries, memory cards, filters, and accessories\u003c\/li\u003e\n\u003cli\u003eUser-replaceable retractable handle, wheels, wheel housings, and front foot extend product life\u003c\/li\u003e\n\u003cli\u003eCustom-designed, high performance, 80mm wheels with sealed ABEC grade 5 bearings for quiet rolling\u003c\/li\u003e\n\u003cli\u003eExtra tall wheel housings protect your bag from scrapes and scratches\u003c\/li\u003e\n\u003cli\u003eSeam-sealed rain cover included\u003c\/li\u003e\n\u003cli\u003eStretchable front pocket\u003c\/li\u003e\n\u003cli\u003eHandles on three sides ensure rapid and easy retrieval from overhead bins, car trunks, etc.\u003c\/li\u003e\n\u003cli\u003eReinforced dividers support heavy gear and maintain strength over time\u003c\/li\u003e\n\u003cli\u003eHypalon reinforced rear corners for increased durability\u003c\/li\u003e\n\u003cli\u003eBusiness card holder on top for identification\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Think Tank","offers":[{"title":"Default Title","offer_id":44577084375317,"sku":"TT572","price":795.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/tt572_3.jpg?v=1680200954"},{"product_id":"think-tank-photo-airport-advantage-xt-black","title":"Think Tank Photo Airport Advantage XT (Black)","description":"\u003cp\u003eThe black\u003cstrong\u003e Airport Advantage XT\u003c\/strong\u003e from \u003cstrong\u003eThink Tank\u003c\/strong\u003e is an extra-high-capacity rolling camera case that is designed to meet the carry-on requirements for most international and US airlines while minimising weight.The large main compartment and its 17 adjustable dividers can hold eight to ten lenses, flashes, accessories, and up to two gripped DSLR camera bodies. Users of mirrorless camera systems can fit at least the same number of lenses along with a camera, plus a flash and back-up camera.\u003c\/p\u003e\u003cp\u003eOn the exterior of the rolling case is a stretchable pocket that is partitioned for a 10in tablet computer and 17in laptop within a protective sleeve. A large flap with touch-tab closure covers the stretchable pocket, while a tripod pocket and accessory straps allow camera supports to be conveniently strapped to the side.\u003c\/p\u003e\u003cp\u003eAside from being able to comfortably hold photo gear plus a laptop and tablet, the interior of the main compartment lid features two, zippered mesh organiser pockets for easy storage of pens, business cards, as well as small electronics. Four handles are included for flexibility while transporting or moving the rolling case, and an extra-long four-stage telescoping top handle, a non-telescoping top handle, and both a side handle plus a foot stand with an integrated handle all make it easier to pick up and place the Airport Advantage XT into airplane overhead bins or into car trunks.\u003c\/p\u003e\u003cp\u003eFor security, the main compartment's two adjoining zipper pull tabs feature shackle holes. During travel, a separately available TSA-accepted lock can be used to secure the two pull tabs together, preventing their sliders from being able to open the zipper chain, keeping items within the Airport Advantage XT secure.\u003c\/p\u003e\u003cp\u003eNylon construction throughout the rolling case and a polyurethane-coated underside provide a high degree of weather resistance and overall durability, which is further complemented by wheel housings that help protect the corners of the Airport Advantage XT from impacts to escalators and curbs. A seam-sealed rain cover is included for even more protection from the elements should the need arise, and if they wear out over time, the wheels, wheel housings, foot stand, and telescoping top handle are user-replaceable.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMain compartment can hold eight to ten lenses, flashes, accessories, and up to two gripped DSLR camera bodies; or an equivalent mirrorless camera system\u003c\/li\u003e\n\u003cli\u003eA stretchable external pocket with touch-tab flap closure can accommodate a 10in tablet computer and 17in laptop within a protective sleeve\u003c\/li\u003e\n\u003cli\u003eMeets international and US carry-on size requirements for most airlines\u003c\/li\u003e\n\u003cli\u003eExtra-long four-stage telescoping handle\u003c\/li\u003e\n\u003cli\u003eNon-telescoping top handle, side handle, and foot stand with integrated handle\u003c\/li\u003e\n\u003cli\u003eMain compartment lid interior with zippered mesh organiser pockets for easy storage of pens, business cards, as well as small electronics\u003c\/li\u003e\n\u003cli\u003eTripod pocket and accessory straps allow camera supports to be conveniently strapped to the side\u003c\/li\u003e\n\u003cli\u003eMain compartment's two adjoining zipper pull tabs each feature shackle holes, allowing a separately available TSA-accepted lock to keep items within the rolling case secure\u003c\/li\u003e\n\u003cli\u003eExterior business card holder for easy identification\u003c\/li\u003e\n\u003cli\u003eWeather-resistant construction with seam-sealed cover for use under heavy rain\u003c\/li\u003e\n\u003cli\u003eWheels, wheel housings, foot stand, and telescoping top handle are user-replaceable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Think Tank","offers":[{"title":"Default Title","offer_id":44577098400021,"sku":"TT730556","price":629.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/5_120_71.jpg?v=1680201060"},{"product_id":"pelican-0340-cube-case-with-foam-black","title":"Pelican 0340 Cube Case with Foam (Black)","description":"\u003cp\u003eThe \u003cstrong\u003ePelican 0340 Cube Case with Foam (Black)\u003c\/strong\u003e is extra-deep, unbreakable, watertight, airtight, dustproof, chemical-resistant, and corrosion-proof. It is made from ultra-high impact structural copolymer that makes it extremely strong and durable.\u003c\/p\u003e\u003cp\u003eThe case is closed by six double ABS latches (two on each side, two in front) to maintain a watertight seal. There is an automatic pressure equalization valve, six easy-open double-throw latches and padlock protectors.\u003c\/p\u003e\u003cp\u003eThe 0340 Cube Case is transported by two large two-person fold-down handles, a built-in spring-loaded pull handle, and a seven-piece foam set is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUnbreakable, watertight, airtight, dustproof, chemical-resistant, and corrosion-proof case\u003c\/li\u003e\n\u003cli\u003eMade of ultra-high impact resistant structural copolymer that makes it extremely strong and durable\u003c\/li\u003e\n\u003cli\u003eOpen cell core with solid wall design\u003c\/li\u003e\n\u003cli\u003eO-ring seal\u003c\/li\u003e\n\u003cli\u003eAutomatic pressure equalization valve\u003c\/li\u003e\n\u003cli\u003eSix easy-open double-throw latches\u003c\/li\u003e\n\u003cli\u003ePadlock protectors\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli\u003eSeven-piece foam set consisting of one convoluted top lid foam, one solid top lid foam, one center foam section, three Pick N Pluck foam sections, and one bottom foam base pad\u003c\/li\u003e\n\u003cli\u003eTemperature rating -40 to +210°F \/ -40 to +99°C\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCarrying options\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLarge two-person fold-down handles\u003c\/li\u003e\n\u003cli\u003eBuilt-in spring-loaded pull handle\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e0340 Case Certificates\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIP67 Ingress Protection (one meter submersion for 30 minutes)\u003c\/li\u003e\n\u003cli\u003eDef Stan 81-41\u003c\/li\u003e\n\u003cli\u003eSTANAG 4280\u003c\/li\u003e\n\u003cli\u003ePersonalized nameplate service available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578335064341,"sku":"0340B","price":1009.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/2_240.jpg?v=1680215391"},{"product_id":"pelican-1200-case-with-foam-black","title":"Pelican 1200 Case with Foam (Black)","description":"\u003cp\u003eThe \u003cstrong\u003ePelican 1200 Case \u003c\/strong\u003ewith \u003cstrong\u003eFoam \u003c\/strong\u003e(Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25 inch (6.4mm) neoprene o-ring, and easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by an oversized handle that enables a person to use two hands for heavy loads.\u003c\/p\u003e\u003cp\u003eThis case has 3-piece foam set interior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUltra-High Impact structural copolymer\u003c\/li\u003e\n\u003cli\u003eWatertight, crushproof, and dust proof\u003c\/li\u003e\n\u003cli\u003eThree-piece foam set interior\u003c\/li\u003e\n\u003cli\u003eAutomatic pressure equalization valve\u003c\/li\u003e\n\u003cli\u003e0.25 inch (6.4mm) neoprene o-ring\u003c\/li\u003e\n\u003cli\u003eEasy-open double throw latches\u003c\/li\u003e\n\u003cli\u003eOpen cell core with solid wall design\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli\u003eThree-piece foam set consists of 1 convoluted foam upper section, 1 Pick 'N Pluck foam section and one 1.0 inch thick blank bottom foam section\u003c\/li\u003e\n\u003cli\u003eTemperature rating -40 to +210°F (-40 to +95°C)\u003c\/li\u003e\n\u003cli\u003eOversized handle enables a person to use two hands to carry heavy loads\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e1200 Certifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIP67 (1 meter submersion for 30 minutes)\u003c\/li\u003e\n\u003cli\u003eDef Stan 81-41\/STANAG 4280\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578336178453,"sku":"1200B","price":159.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/e.jpg?v=1680215406"},{"product_id":"pelican-1400-case-with-foam-black","title":"Pelican 1400 Case with Foam (Black)","description":"\u003cp\u003eThe \u003cstrong\u003ePelican 1400 Case\u003c\/strong\u003e with \u003cstrong\u003eFoam (Black) \u003c\/strong\u003eis an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25 inch (6.4mm) neoprene o-ring, and easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by a folding molded handle.\u003c\/p\u003e\u003cp\u003eThis case has a 3-piece foam interior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUltra-High Impact structural copolymer\u003c\/li\u003e\n\u003cli\u003eWatertight, crushproof, and dust proof\u003c\/li\u003e\n\u003cli\u003eFoam interior\u003c\/li\u003e\n\u003cli\u003eOpen cell core with solid wall design\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli\u003eThree-piece foam set that consists of 1 \"egg crate\" foam upper section, 1 Pick N' Pluck foam section and one 1.0 inch blank bottom foam section\u003c\/li\u003e\n\u003cli\u003eAutomatic pressure equalization valve\u003c\/li\u003e\n\u003cli\u003e0.25 inch (6.4mm) neoprene o-ring\u003c\/li\u003e\n\u003cli\u003eEasy-open double throw latches with stainless steel padlock protectors\u003c\/li\u003e\n\u003cli\u003eTemperature rating -40 to +210°F (-40 to +95°C)\u003c\/li\u003e\n\u003cli\u003eComfortable rubber over-molded handle\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIP67 (1 meter submersion for 30 minutes)\u003c\/li\u003e\n\u003cli\u003eDef Stan 81-41\/STANAG 4280\u003c\/li\u003e\n\u003cli\u003eATA 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578336276757,"sku":"1400B","price":279.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1483877244_40651.jpg?v=1680215418"},{"product_id":"pelican-1485-air-hard-case-with-trekpak-dividers-system","title":"Pelican 1485 Air Hard Case with TrekPak Dividers System","description":"\u003cp\u003eCombining strength and lightness, the black \u003cstrong\u003ePelican 1485AirTP Compact Hand-Carry Case with TrekPak Insert\u003c\/strong\u003e is watertight, crushproof, dustproof, and optimised for travel. For travel by air, Pelican has aggregated available airline rules for maximum overhead and check-in dimensions with the goal of creating a case that conforms to their requirements. Of course, there will always be exceptions, so it's wise to contact your carrier before departing.\u003c\/p\u003e\u003cp\u003eYour 1485AirTP case is made of a super-light, proprietary HPX polymer with honeycomb structural elements that is up to 40% lighter than most other Pelican polymers. This confidence-inspiring design has been drop-tested on concrete on all sides and corners while loaded with gear. Not content with stopping there, the case has also been tested with a 28 lb steel dart dropped from a height of three feet.\u003c\/p\u003e\u003cp\u003eFully featured, the case has ABS double-throw latches that accept a user-supplied padlock, a watertight O-ring gasket, an automatic purge valve, and stainless steel hasp protectors. Users will appreciate the new, stylish conic curve lid shape and rubber overmolded handle. And for easier case ID, there's an attractive, removable polycarbonate card holder that may be placed on the front or side of the case.\u003c\/p\u003e\u003cp\u003eBesides being lighter, Pelican has also improved the divider system. The system is called TrekPak and uses pre-installed wall sections, divider panels, locking pins, and an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. Extra divider material is included for occasions where your equipment requirements vary. Thick 7\/16 inch divider sections are made of waterproof closed cell foam that is laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with 1 inch bottom foam and lid foam to give your gear 360-degree protection.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578338210069,"sku":"1485AIRBTREKG2","price":589.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/a.jpg?v=1680215430"},{"product_id":"pelican-1500-case-with-foam-black","title":"Pelican 1500 Case with Foam (Black)","description":"\u003cp\u003eThe \u003cstrong\u003ePelican 1500 Case\u003c\/strong\u003e with \u003cstrong\u003eFoam (\u003c\/strong\u003eBlack) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25 inch (6.4mm) neoprene o-ring, easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by a folding rubber over-molded handle.\u003c\/p\u003e\u003cp\u003eThe case includes a three piece foam insert set consisting of; 1 \"Egg crate\" type foam in lid, 1 Pick 'N Pluck foam insert and one 1.0 inch foam pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUltra-High Impact structural copolymer\u003c\/li\u003e\n\u003cli\u003eWatertight, crushproof, and dust proof\u003c\/li\u003e\n\u003cli\u003eThree piece foam insert\u003c\/li\u003e\n\u003cli\u003eOpen cell core with solid wall design\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli\u003eThree piece foam insert set consisting of; 1 \"Egg crate\" type foam in lid, 1 Pick 'N Pluck foam insert and one 1.0 inch foam pad\u003c\/li\u003e\n\u003cli\u003eAutomatic pressure equalization valve\u003c\/li\u003e\n\u003cli\u003e0.25 inch (6.4mm) neoprene o-ring\u003c\/li\u003e\n\u003cli\u003eEasy-open double throw latches\u003c\/li\u003e\n\u003cli\u003eTemperature rating -40 to +210°F (-40 to +95°C)\u003c\/li\u003e\n\u003cli\u003eRubber over-molded handle\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIP67 (1 meter submersion for 30 minutes)\u003c\/li\u003e\n\u003cli\u003eDef Stan 81-41\/STANAG 4280\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578339651861,"sku":"1500B","price":409.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1361451103_40657.jpg?v=1680215443"},{"product_id":"pelican-1525-air-hard-case-with-trekpak-dividers-system","title":"Pelican 1525 Air Hard Case with Trekpak Dividers System","description":"\u003cp\u003eThe \u003cstrong\u003e1525Air Ca\u003c\/strong\u003ese is made of a super-light, proprietary HPX polymer with honeycomb structural elements that is up to 40% lighter than most other \u003cstrong\u003ePelican \u003c\/strong\u003epolymers. This confidence-inspiring design has been drop-tested on concrete on all sides and corners while loaded with gear. Not content to stop there; the case is also tested with a 28 lb steel dart dropped from a height of 3-feet.\u003c\/p\u003e\u003cp\u003eFully-featured, the case has ABS double-throw latches that accept a user-supplied padlock, a watertight o-ring gasket, an automatic purge valve, and stainless steel hasp protectors. Users will appreciate the new, stylish conic curve lid shape and rubber overmolded handle. Additionally, for easier case ID, there's an attractive, removable polycarbonate card holder that may be placed on the front or side of the case.\u003c\/p\u003e\u003cp\u003eBesides being lighter, Pelican has also improved the divider system. The system is called TrekPak and uses pre-installed wall sections, divider panels, locking pins, and an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. Extra divider material is included for occasions where your equipment requirements vary. 7\/16 inch thick divider sections are made of waterproof, closed cell foam that is laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with 1 inch bottom foam and lid foam to give your gear 360-degree protection.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578340536597,"sku":"1525AIRBTREKG2","price":649.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/3_181.jpg?v=1680215463"},{"product_id":"pelican-1535-air-trekpak-no-foam-black","title":"Pelican 1535AIR Hard Case - Empty (Black)","description":"\u003cp\u003e\u003cstrong\u003ePelican 1535 AIR case\u003c\/strong\u003e is a Lifetime Guarantee of Excellence. A light weight of just 3.9 kg. At up to 40% lighter than other polymer cases, Pelican™ Air cases lighten the loads of the dedicated professionals across the world who have set out to change the game.Pelican™ Air cases are the first in a series of remarkable innovations engineered by Pelican, the pioneers of protective cases. For over 40 years Pelican has designed and crafted the most influential protective cases in the world, and we're just getting started.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eWith the launch of the Pelican Air line of cases, we're redefining the future of protection with a remarkable union of light and tough.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578340733205,"sku":"1535AIRBNFG3","price":499.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/b_1.jpg?v=1680215475"},{"product_id":"pelican-1535-air-hard-case-with-trekpak-dividers-system","title":"Pelican 1535 Air Hard Case with Trekpak Dividers System","description":"\u003cp\u003eCombining strength and lightness, the black \u003cstrong\u003ePelican 1535 \u003c\/strong\u003e\u003cstrong\u003eAirTP\u003c\/strong\u003e\u003cstrong\u003e Wheeled Carry-On Case with TrekPak Insert\u003c\/strong\u003e is watertight, crushproof, dustproof, and optimised for travel. For travel by air, Pelican has aggregated available airline rules for maximum overhead and check-in dimensions with the goal of creating a case that conforms to their requirements. Of course, there will always be exceptions, so it's wise to contact your carrier before departing.\u003c\/p\u003e\u003cp\u003eYour 1535 AirTP case is made of a super-light, proprietary HPX polymer with honeycomb structural elements that is up to 40% lighter than most other Pelican polymers. This confidence-inspiring design has been drop-tested on concrete on all sides and corners while loaded with gear. Not content to stop there; the case is also tested with a 28 lb steel dart dropped from a height of 3 feet, submerged for 30 minutes at a depth of 3.3 feet, and wheels are roll tested over 1,000 yards with loads at 5 mph.\u003c\/p\u003e\u003cp\u003eFully-featured, the case has ABS double-throw latches that accept a user-supplied padlock, a watertight O-ring gasket, an automatic purge valve, and stainless-steel hasp protectors. Users will appreciate the new, stylish conic curve lid shape, rubber overmolded handles, and an extending trolley handle. Additionally, for easier case ID, there's an attractive, removable polycarbonate card holder that may be placed on the front or side of the case.\u003c\/p\u003e\u003cp\u003eBesides being lighter, Pelican has also improved the divider system. The system is called TrekPak and uses pre-installed wall sections, divider panels, locking pins, and an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. Extra divider material is included for occasions where your equipment requirements vary. 7\/16 inch thick divider sections are made of waterproof, closed cell foam that is laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with 1 inch bottom foam and lid foam to give your gear 360-degree protection.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578341093653,"sku":"1535AIRBTREKG3","price":829.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/q.jpg?v=1740638741"},{"product_id":"pelican-1535-air-with-dividers-black","title":"Pelican 1535 Air with Dividers (Black)","description":"\u003cp\u003eCombining strength and lightness, the black \u003cstrong\u003ePelican 1535 AirWD\u003c\/strong\u003e \u003cstrong\u003eWheeled Carry-On Case\u003c\/strong\u003e \u003cstrong\u003ewith Dividers\u003c\/strong\u003e 2017 is watertight, crushproof, dustproof, and optimised for travel. For travel by air, Pelican has aggregated available airline rules for maximum overhead and check-in dimensions with the goal of creating a case that conforms to their requirements. Of course, there will always be exceptions, so it's wise to contact your carrier before departing.\u003c\/p\u003e\u003cp\u003eYour 1535 AirWD case is made of a super-light, proprietary HPX polymer with honeycomb structural elements that is up to 40% lighter than most other Pelican polymers. This confidence-inspiring design has been drop-tested on concrete on all sides and corners while loaded with gear. Not content to stop there; the case is also tested with a 28 lb steel dart dropped from a height of 3 feet, submerged for 30 minutes at a depth of 3.3 feet, and wheels are roll tested over 1,000 yards with loads at 5 mph.\u003c\/p\u003e\u003cp\u003eFully-featured, the case has ABS double-throw latches that accept a user-supplied padlock, a watertight O-ring gasket, an automatic purge valve, and stainless-steel hasp protectors. Users will appreciate the new, stylish conic curve lid shape, rubber overmolded handles, and an extending trolley handle. Additionally, for easier case ID, there's an attractive, removable polycarbonate card holder that may be placed on the front or side of the case.\u003c\/p\u003e\u003cp\u003eBesides being lighter, Pelican has also added some nice touches to the divider system. The system features a full sewn tub with a felt exterior and touch-fastening, padded dividers. Users will appreciate the bright yellow, hi-visibility fabric that makes finding gear in low light much easier. Elastic hold down straps keep gear extra secure, and prevent unwanted movement. The divider set includes one tub, two large dividers, six medium dividers, and three small dividers.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578341650709,"sku":"1535AIRBWDG3","price":749.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/w.jpg?v=1680215495"},{"product_id":"pelican-1555airtp-carry-on-case-black-trekpak-insert","title":"Pelican 1555AirTP Carry-On Case (Black, TrekPak Insert)","description":"\u003cp\u003eCombining strength and lightness, the black \u003cstrong\u003ePelican 1555AirTP Carry-On Case\u003c\/strong\u003e with \u003cstrong\u003eTrekPak Insert\u003c\/strong\u003e is watertight, crushproof, dustproof, and optimised for travel. For travel by air, Pelican has aggregated available airline rules for maximum overhead and check-in dimensions, with the goal of creating a case that conforms to their requirements. Of course, it is always recommended to contact your carrier before departing.\u003c\/p\u003e\u003cp\u003eYour 1555AirTP case is made of a super-light proprietary HPX polymer, with honeycomb structural elements, which is up to 40% lighter than most other Pelican polymers. This confidence-inspiring design has been drop-tested on concrete on all sides and corners while loaded with gear. Not content with stopping there, the case has also been tested with a 28 lb steel dart dropped from a height of three feet.\u003c\/p\u003e\u003cp\u003eFully featured, the case has ABS double-throw latches that accept a user-supplied padlock, a watertight O-ring gasket, an automatic purge valve, and stainless steel hasp protectors. Users will appreciate the stylish conic curve lid shape and rubber overmolded handle. And for easier case ID, there's an attractive and removable polycarbonate card holder that may be placed on the front or side of the case.\u003c\/p\u003e\u003cp\u003eBesides being lighter, Pelican has also improved the divider system. The system is called TrekPak and uses pre-installed wall sections, divider panels, locking pins, and an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. Extra divider material is included for occasions when your equipment requirements vary. Thick 7\/16 inch divider sections are made of waterproof closed cell foam that is laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with 1 inch bottom foam and lid foam to give your gear 360-degree protection.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578341880085,"sku":"1555AIRBTREKG2","price":779.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1535airbtrek.jpg?v=1740638712"},{"product_id":"pelican-1560-case-with-foam-black","title":"Pelican 1560 Case with Foam (Black)","description":"\u003cp\u003eThe \u003cstrong\u003ePelican 1560 Case with Foam Set (Black) \u003c\/strong\u003eis a durable, watertight, airtight, dust-proof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of ultra-high impact structural copolymer that makes it extremely strong and durable. It has a 0.25 inch (6.4 mm) neoprene o-ring, two easy-open double throw latches that seal perfectly. It has a built-in, automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by a comfortable rubber over-molded top and side handles, retractable pull extension handle and built-in wheels.\u003c\/p\u003e\u003cp\u003eA four-piece foam set is included. The 1560 case is NATO-codified and tested to IP-67 (Ingress Protection)and Def Stan 81-41\/STANAG 4280 requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUltra-high Impact structural copolymer\u003c\/li\u003e\n\u003cli\u003eFour-piece foam set that consists of one \"egg crate\" foam upper section, two Pick 'N Pluck foam sections, and one 1 inch blank bottom foam section\u003c\/li\u003e\n\u003cli\u003eEasy open double throw latches\u003c\/li\u003e\n\u003cli\u003eBuilt-in automatic pressure equalization valve\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli\u003ePadlock protectors\u003c\/li\u003e\n\u003cli\u003eTemperature rating -10 to +210° F (-23 to +99° C)\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCarrying options\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eComfortable rubber over-molded side and top handles\u003c\/li\u003e\n\u003cli\u003eRetractable pull handle\u003c\/li\u003e\n\u003cli\u003eBuilt-in 2 inch hard rubber transport wheels\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e1560 Case Certificates\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIP67 (1 meter submersion for 30 minutes) (Ingress Protection)\u003c\/li\u003e\n\u003cli\u003eMIL C-4150J (Military Standard)\u003c\/li\u003e\n\u003cli\u003eDef Stan 81-41\/STANAG 4280\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578342273301,"sku":"1560B","price":579.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/3_182.jpg?v=1680215516"},{"product_id":"pelican-1610-case-with-foam-black","title":"Pelican 1610 Case with Foam (Black)","description":"\u003cp\u003eThe \u003cstrong\u003ePelican 1610 Case with Foam Set (Black)\u003c\/strong\u003e is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment. It is made of ultra-high impact structural copolymer that makes it extremely strong and durable. It has a 0.25 inch (6.4 mm) neoprene o-ring, 4 easy-open double throw latches that seal perfectly. It has a built-in automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by 3 comfortable rubber over-molded haul handles, a retractable handle and built-in wheels.\u003c\/p\u003e\u003cp\u003eA five-piece foam set is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUltra-high impact structural copolymer\u003c\/li\u003e\n\u003cli\u003eOpen-cell core with solid wall design\u003c\/li\u003e\n\u003cli\u003eEasy open double throw latches\u003c\/li\u003e\n\u003cli\u003eBuilt-in automatic pressure equalization valve\u003c\/li\u003e\n\u003cli\u003ePadlock protectors\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli\u003eFive-piece foam set that consists of one \"egg crate\" foam upper section, three Pick 'N Pluck foam sections, and one 1 inch blank bottom foam section\u003c\/li\u003e\n\u003cli\u003eTemperature rating -10 to +210° F (-23 to +99° C)\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCarrying options\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTop folding rubber over-molded haul handle\u003c\/li\u003e\n\u003cli\u003eTwo side rubber over-molded haul handles\u003c\/li\u003e\n\u003cli\u003eRetractable extension handle\u003c\/li\u003e\n\u003cli\u003ePolyurethane wheels with stainless steel bearings\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e1610 Case Certificates\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIP67 (1 meter submersion for 30 minutes) (Ingress Protection)\u003c\/li\u003e\n\u003cli\u003eDef Stan 81-41\/STANAG 4280\u003c\/li\u003e\n\u003cli\u003eMIL-STD-810F\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578342994197,"sku":"1610AB","price":749.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/3_181_5.jpg?v=1680215539"},{"product_id":"pelican-1610-case-without-foam-black","title":"Pelican 1610 Case without Foam (Black)","description":"\u003cp\u003eThe black \u003cstrong\u003ePelican 1610 Case Without Foam\u003c\/strong\u003e is an unbreakable, watertight, airtight, dust-proof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment. It is made of ultra-high impact structural copolymer that makes it extremely strong and durable. It has a 0.25 inch neoprene O-ring, four easy-open double throw latches that seal perfectly. It has a built-in automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless-steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by three comfortable rubber overmolded haul handles, a retractable handle and built-in wheels.\u003c\/p\u003e\u003cp\u003eThis case has an empty interior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUltra-high impact structural copolymer\u003c\/li\u003e\n\u003cli\u003eOpen-cell core with solid wall design\u003c\/li\u003e\n\u003cli\u003eEmpty interior\u003c\/li\u003e\n\u003cli\u003eEasy open double throw latches\u003c\/li\u003e\n\u003cli\u003eBuilt-in automatic pressure equalization valve\u003c\/li\u003e\n\u003cli\u003ePadlock protectors\u003c\/li\u003e\n\u003cli\u003eStainless-steel hardware\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCarrying options\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTop folding rubber overmolded haul handle\u003c\/li\u003e\n\u003cli\u003eTwo side rubber overmolded haul handles\u003c\/li\u003e\n\u003cli\u003eRetractable extension handle\u003c\/li\u003e\n\u003cli\u003ePolyurethane wheels with stainless-steel bearings\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e1610 Case Certificates\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIP67 (1-meter submersion for 30 minutes) (Ingress Protection)\u003c\/li\u003e\n\u003cli\u003eDef Stan 81-41\/STANAG 4280\u003c\/li\u003e\n\u003cli\u003eMIL-STD-810F\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578346729749,"sku":"1610ABNF","price":639.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1278520559_img_169836.jpg?v=1680215550"},{"product_id":"pelican-1615-air-hard-case-with-trekpak-dividers-system-wheeled","title":"Pelican 1615 Air Hard Case with Trekpak Dividers System Wheeled","description":"\u003cp\u003eCombining strength and lightness, the black \u003cstrong\u003ePelican 1615AirTP Wheeled Check-In Case with TrekPak Insert \u003c\/strong\u003eis watertight, crushproof, dustproof, and optimised for travel. For travel by air, Pelican has aggregated available airline rules for check-in dimensions with the goal of creating a case that conforms to their requirements. Of course there will always be exceptions, so it's wise to contact your carrier before departing.\u003c\/p\u003e\u003cp\u003eYour 1615AirTP case is made of a super-light, proprietary HPX polymer with honeycomb structural elements that is up to 40% lighter than most other Pelican polymers. This confidence-inspiring design has been drop-tested on concrete on all sides and corners while loaded with gear. Not content to stop there; the case is also tested with a 28 lb steel dart dropped from a height of 3 feet, submerged for 30 minutes at a depth of 3.3 feet, and wheels are roll tested over 1,000 yards with loads at 5 mph.\u003c\/p\u003e\u003cp\u003eFully-featured, the case has ABS double-throw latches that accept a user-supplied padlock, a watertight o-ring gasket, an automatic purge valve, and stainless steel hasp protectors. Users will appreciate the new, stylish conic curve lid shape, rubber overmolded handles, and an extending trolley handle. Additionally, for easier case ID, there's an attractive, removable polycarbonate card holder that may be placed on the front or side of the case.\u003c\/p\u003e\u003cp\u003eBesides being lighter, Pelican has also improved the divider system. The system is called TrekPak and uses pre-installed wall sections, divider panels, locking pins, and an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. Extra divider material is included for occasions where your equipment requirements vary. 7\/16 inch thick divider sections are made of waterproof, closed cell foam that is laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with 1 inch bottom foam and lid foam to give your gear 360-degree protection.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578348564757,"sku":"1615AIRBTREKG2","price":1089.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/v1.jpg?v=1680215572"},{"product_id":"pelican-im2500-storm-trak-case-without-foam-black","title":"Pelican iM2500 Storm Trak Case without Foam (Black)","description":"\u003cp\u003eThe \u003cstrong\u003ePelican iM2500 Storm Trak Case without Foam (Black)\u003c\/strong\u003e is an injection-molded case made of HPX high performance resin, that is virtually unbreakable, dent-resistant and shatter-resistant. It is tough, rugged, lightweight, airtight and watertight. There is a permanently attached Vortex valve that automatically adjusts air pressure without letting in water, and won't unscrew from the case. Press \u0026amp; Pull latches open with the push of a button, yet stay closed securely under impact or stress. The case has unbreakable molded-in hasps that allow the addition of standard size padlocks. It has hinges with integrated feet that hold fast under impact, and create a flat surface for upright stability. It is carried by a double-layered, soft-grip, solid-core handle, lightweight retractable, telescoping handle and rugged in-line wheels.\u003c\/p\u003e\u003cp\u003eThis case has an empty interior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHPX high performance resin exterior\u003c\/li\u003e\n\u003cli\u003eTough, rugged and lightweight\u003c\/li\u003e\n\u003cli\u003eAirtight and watertight\u003c\/li\u003e\n\u003cli\u003eVortex air pressure valve\u003c\/li\u003e\n\u003cli\u003ePress and pull latches\u003c\/li\u003e\n\u003cli\u003eMolded-in hasps\u003c\/li\u003e\n\u003cli\u003eHinges with integrated feet\u003c\/li\u003e\n\u003cli\u003eMolded-in stacking ribs\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eOn Board\u003c\/strong\u003e\u003cbr\u003eMeets current FAA requirements for carry on bags, by fitting under seats and in overhead compartments\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote\u003c\/strong\u003e:\u003cbr\u003eRequirements are subject to change always check with the carrier\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInjection-molded case made of HPX high performance resin is virtually unbreakable, dent-resistant and shatter-resistant\u003c\/li\u003e\n\u003cli\u003ePermanently attached Vortex valve automatically adjusts air pressure without letting in water, and won't unscrew from the case\u003c\/li\u003e\n\u003cli\u003ePress \u0026amp; Pull latches open with the push of a button, yet stay closed securely under impact or stress\u003c\/li\u003e\n\u003cli\u003eTwo unbreakable molded-in hasps allow the addition of standard size padlocks, offering another measure of security\u003c\/li\u003e\n\u003cli\u003eHinges with integrated feet hold fast under impact and create a flat surface for upright stability\u003c\/li\u003e\n\u003cli\u003eMolded-in stacking ribs provide no-slip stability for multiple case-stacking during storage or transport\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCarrying options\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDouble-layered, soft-grip, solid-core carrying handle provides strong, durable comfort\u003c\/li\u003e\n\u003cli\u003eLightweight, retractable, telescoping handle locks in place\u003c\/li\u003e\n\u003cli\u003eRugged in-line wheels have shielded ball bearings, and are composed of a nylon core encased in a polyurethane tread. The wheels are mounted on a solid axle for improved stability and ease of transport.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTests\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeets ATA 300 category 1 standards for transit cases\u003c\/li\u003e\n\u003cli\u003eMeets FED-STD-101C requirements for drops and vibration (loose cargo)\u003c\/li\u003e\n\u003cli\u003eExceeds the specifications listed in MIL-STD-648C for vibration (sweep)\u003c\/li\u003e\n\u003cli\u003eMeets MIL-STD-810F for immersion and simulated rainfall\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578352595221,"sku":"IM2500BNF","price":479.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/im2500a.jpg?v=1680215606"},{"product_id":"pelican-storm-im2450-storm-case-without-foam-black","title":"Pelican-Storm iM2450 Storm Case without Foam (Black)","description":"\u003cp\u003eThe \u003cstrong\u003ePelican iM2450 Storm Case \u003c\/strong\u003ewithout \u003cstrong\u003eFoam \u003c\/strong\u003e(Black) is an injection-molded case made of HPX high performance resin, that is virtually unbreakable, dent-resistant and shatter-resistant. It is tough, rugged, lightweight, airtight and watertight. There is a permanently attached Vortex valve that automatically adjusts air pressure without letting in water, and won't unscrew from the case. Press \u0026amp; Pull latches open with the push of a button, yet stay closed securely under impact or stress. The case has unbreakable molded-in hasps that allow the addition of standard size padlocks. It has hinges with integrated feet that hold fast under impact, and create a flat surface for upright stability. It is carried by a double-layered, soft-grip, solid-core handle that provides strong, durable comfort.\u003c\/p\u003e\u003cp\u003eThis case has an empty interior.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInjection-molded case made of HPX high performance resin is virtually unbreakable, dent-resistant and shatter-resistant\u003c\/li\u003e\n\u003cli\u003eTough, rugged and lightweight\u003c\/li\u003e\n\u003cli\u003eAirtight and watertight\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eOn Board\u003c\/strong\u003e\u003cbr\u003eMeets current FAA requirements for carry on bags, by fitting under seats and in overhead compartments 1\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePermanently attached Vortex valve automatically adjusts air pressure without letting in water, and won't unscrew from the case\u003c\/li\u003e\n\u003cli\u003ePress \u0026amp; Pull latches open with the push of a button, yet stay closed securely under impact or stress\u003c\/li\u003e\n\u003cli\u003eTwo unbreakable molded-in hasps allow the addition of standard size padlocks, offering another measure of security\u003c\/li\u003e\n\u003cli\u003eHinges with integrated feet hold fast under impact and create a flat surface for upright stability\u003c\/li\u003e\n\u003cli\u003eMolded-in stacking ribs provide no-slip stability for multiple case-stacking during storage or transport\u003c\/li\u003e\n\u003cli\u003eDouble-layered, soft-grip, solid-core carrying handle provides strong, durable comfort\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTests\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeets ATA 300 category 1 standards for transit cases\u003c\/li\u003e\n\u003cli\u003eMeets FED-STD-101C requirements for drops and vibration (loose cargo)\u003c\/li\u003e\n\u003cli\u003eExceeds the specifications listed in MIL-STD-648C for vibration (sweep)\u003c\/li\u003e\n\u003cli\u003eMeets MIL-STD-810F for immersion and simulated rainfall\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44578355577109,"sku":"IM2450B","price":459.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1479659740_568995.jpg?v=1680215652"},{"product_id":"hprc-2400-hard-case-for-dji-mavic-pro-2-zoom-black","title":"HPRC 2400 Hard Case for DJI Mavic Pro 2 \/ Zoom (Black)","description":"\u003cp\u003eThis black \u003cstrong\u003e2400 Series Hard Case\u003c\/strong\u003e from \u003cstrong\u003eHPRC \u003c\/strong\u003efeatures a custom foam interior for the DJI Mavic Pro and accessories. The case is impact-resistant and watertight, and it meets ATA 300 specifications for transit cases. It features a comfortable, soft-grip handle for carrying and an air pressure–release valve. By replacing the foam with separately available inserts, the case can be used to carry audio, photo, or video equipment and accessories. It is backed by a limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCase For Accommodates:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDJI Mavic Pro 2 Quadcopter\u003c\/li\u003e\n\u003cli\u003eA radio controller\u003c\/li\u003e\n\u003cli\u003eTwo sets for spare propellers (Beneath Aircraft)\u003c\/li\u003e\n\u003cli\u003eFour spare flight batteries\u003c\/li\u003e\n\u003cli\u003eA battery charger and charging hub\u003c\/li\u003e\n\u003cli\u003eA charging bank adapter\u003c\/li\u003e\n\u003cli\u003eCables\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HPRC","offers":[{"title":"Default Title","offer_id":44578399912213,"sku":"MAV2-2400BLK-02","price":386.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1484564490_img_737224.jpg?v=1680217103"},{"product_id":"hprc-2350-hard-case-for-dji-spak-fly-by-combo-black","title":"HPRC 2350 Hard Case for DJI Spark Fly by Combo (Black)","description":"\u003cp\u003eThe black \u003cstrong\u003eHPRC 2350 Hard Case \u003c\/strong\u003eof \u003cstrong\u003eDJI Spark Fly More Combo\u003c\/strong\u003e is a lightweight, waterproof, unbreakable case that has been specially designed with high density custom cut foam to protect the DJI Spark Drones.Ergonomic handle made of PP SEBS material and a steel pin to provide a high-level of ergonomics.Automatic valve which automatically adjusts the air pressure inside Internal O-ring made of neopren PA66 makes the suitcase is totally waterproof.Extremely robust latch two phase latch system ensuring a fluidity of movement and preventing accidental opening in case of a fall.Reinforced corners that make it extremely shock-resistant.Each Case is made of a patented material consisting of a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight.\u003c\/p\u003e","brand":"HPRC","offers":[{"title":"Default Title","offer_id":44578400108821,"sku":"SPK2350BLK-01","price":145.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/2350_a.jpg?v=1680217113"},{"product_id":"hprc-3500-hard-backpack-for-dji-mavic-2-pro-zoom-smart-controller","title":"HPRC 3500 Hard Backpack for DJI Mavic 2 Pro\/Zoom \u0026 Smart Controller","description":"\u003cp\u003eThe \u003cstrong\u003eHPRC 3500 Hard Backpack\u003c\/strong\u003e for \u003cstrong\u003eDJI Mavic 2 Pro\/Zoom \u003c\/strong\u003e\u0026amp; \u003cstrong\u003eSmart Controller\u003c\/strong\u003e holds the drone, all its standard accessories, and the 5.5 inch display Smart Controller in a compartmentalized interior.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eDesignated Compartments for:\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eDJI Mavic 2 Pro\/Zoom with Intelligent Flight Battery and Gimbal Protector\u003c\/li\u003e\r\n\t\u003cli\u003eRemote Controller\/Smart Controller with 5.5\" display\u003c\/li\u003e\r\n\t\u003cli\u003eFive additional Intelligent Flight Batteries\u003c\/li\u003e\r\n\t\u003cli\u003eUSB power adapter\/cable\u003c\/li\u003e\r\n\t\u003cli\u003eMavic 2 car charger\u003c\/li\u003e\r\n\t\u003cli\u003eTwo battery charging hubs \/adapters, miscellaneous\u003c\/li\u003e\r\n\t\u003cli\u003eUSB adapter\u003c\/li\u003e\r\n\t\u003cli\u003eCables\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"HPRC","offers":[{"title":"Default Title","offer_id":44580109877525,"sku":"MAV2-3500BLK-02","price":680.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/4_173_6.jpg?v=1680256436"},{"product_id":"hprc-pha4-2710-hard-case-for-dji-ph","title":"HPRC PHA4-2710 Hard Case for DJI Phantom","description":"\u003cp\u003eThe \u003cstrong\u003ePHA4-2710 Hard Case\u003c\/strong\u003e for DJI \u003cstrong\u003ePhantom 4 \/ Phantom 4 Pro \/ Phantom 4 Pro+ \u003c\/strong\u003eis a watertight hard case from HPRC that features a pre-cut foam interior to fit the DJI Phantom 4 Quadcopter with a tablet, up to five spare batteries, the radio controller, two sets of spare propellers, tools, cables, and more. It is impact and drop resistant, corrosion resistant, and features a neoprene seal that, when properly closed, is designed to keep the case watertight and your Phantom protected, even if it's submerged in shallow water. A release valve allows you to equalise air pressure when travelling between different elevations.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe foam interior can be removed and will fit in the PH4-BACKPACK (available separately), for a lightweight, highly mobile solution.\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eThe Phantom fits fully recessed in the foam for maximum protection\u003c\/li\u003e\r\n\t\u003cli\u003ePropellers stay on when storing in the case\u003c\/li\u003e\r\n\t\u003cli\u003eOne main central handle plus two side handles for easy carrying\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eThe PHA4-2710 Accommodates\u003c\/strong\u003e:\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eDJI Phantom 4 \/ Phantom 4 Pro \/ Phantom 4 Pro+ quadcopter with propellers attached\u003c\/li\u003e\r\n\t\u003cli\u003eTransmitter (radio controller)\u003c\/li\u003e\r\n\t\u003cli\u003eSun shade for tablet \/ instruction manual\u003c\/li\u003e\r\n\t\u003cli\u003eiPad Air \/ tablet up to 10 inch\u003c\/li\u003e\r\n\t\u003cli\u003eUp to five spare flight batteries\u003c\/li\u003e\r\n\t\u003cli\u003eFlight battery charger and cables\u003c\/li\u003e\r\n\t\u003cli\u003eTwo sets of spare propellers\u003c\/li\u003e\r\n\t\u003cli\u003eThree filters\u003c\/li\u003e\r\n\t\u003cli\u003eTools\u003c\/li\u003e\r\n\t\u003cli\u003eCables and other sundries\u003c\/li\u003e\r\n\t\u003cli\u003eIncludes HPRC1100 case for eight microSD Cards\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"HPRC","offers":[{"title":"Default Title","offer_id":44580110106901,"sku":"PHA4-2710-01","price":731.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/8_54_1.jpg?v=1680256455"},{"product_id":"hprc-2500-hard-case-with-cubed-foam-orange","title":"HPRC 2500 - Hard Case with Cubed Foam (Orange)","description":"\u003cp\u003eStore, transport, and protect your gear with the lightweight, waterproof, unbreakable, black \u003cstrong\u003eHPRC (High-Performance Resin Cases) 2500 Hard Case\u003c\/strong\u003e with \u003cstrong\u003eInternal Bag\u003c\/strong\u003e and \u003cstrong\u003eDividers Kit\u003c\/strong\u003e. The case can be used to carry audio, photo and video equipment, and much more. It meets ATA 300 specifications for transit cases. Virtually unbreakable, the hard-resin shell is designed for protection. The interior rubber O-ring ensures the case is air and watertight. Carry your case with the comfortable, soft-grip handle. To maintain proper pressure, the case has an air pressure release valve.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis case includes an internal bag case with four, padded dividers and a roll of touch-fastening tape. To custom organise gear, simply cut the dividers to the desired length and apply the tape as needed. The bag is constructed from padded, water-resistant, 1000D nylon, and may be used alone or with the hard case. It features a zippered closure, a top handle, and D-rings for attaching an optional shoulder strap.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eLightweight, unbreakable TTX01 resin exterior\u003c\/li\u003e\r\n\t\u003cli\u003eCrushproof, weatherproof, acid-corrosion proof and non-conductive\u003c\/li\u003e\r\n\t\u003cli\u003eInterior case included\u003c\/li\u003e\r\n\t\u003cli\u003eNeoprene PA66 O-ring keep the cases air and watertight\u003c\/li\u003e\r\n\t\u003cli\u003eTight closures\u003c\/li\u003e\r\n\t\u003cli\u003eReinforced corners\u003c\/li\u003e\r\n\t\u003cli\u003eStainless steel hardware\u003c\/li\u003e\r\n\t\u003cli\u003eReinforced, double-hinged locking system for increased safety and security\u003c\/li\u003e\r\n\t\u003cli\u003eMoulded-in hasp allows for optional padlock\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eProduct Highlights\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eInterior case is a strong and padded internal 1000 denier Cordura bag with dividers inside. It has a comfortable handle and convenient rings for optional straps\u003c\/li\u003e\r\n\t\u003cli\u003eTemperature rating: -40 to +176°F (-40 to +80°C)\u003c\/li\u003e\r\n\t\u003cli\u003eCase is carried by an SEBS rubber, super-soft rigid grip handle\u003c\/li\u003e\r\n\t\u003cli\u003eBacked by a lifetime replacement warranty\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eHPRC2500IC Certifications\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eMeets or exceeds ATA (Air Transport Association) 300 rated for shipping cases\u003c\/li\u003e\r\n\t\u003cli\u003eIP67-rated\u003c\/li\u003e\r\n\t\u003cli\u003eSTANAG 4280 and DS 81-41 are NATO equivalents for military specifications for standardised endurance and quality tests designed to simulate extreme situation\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"HPRC","offers":[{"title":"Default Title","offer_id":44580110205205,"sku":"HPRC2500CUBORA","price":344.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/2_277_15.jpg?v=1680256466"},{"product_id":"pelican-im2500-storm-trak-case-without-foam-yellow","title":"Pelican iM2500 Storm Trak Case without Foam (Yellow)","description":"\u003cul\u003e\r\n\u003cli\u003eThe Pelican iM2500 Storm Trak Case without Foam (Yellow) is an injection-molded case made of HPX high performance resin, that is virtually unbreakable, dent-resistant and shatter-resistant. It is tough, rugged, lightweight, airtight and watertight. There is a permanently attached Vortex valve that automatically adjusts air pressure without letting in water, and won't unscrew from the case. Press \u0026amp; Pull latches open with the push of a button, yet stay closed securely under impact or stress. The case has unbreakable molded-in hasps that allow the addition of standard size padlocks. It has hinges with integrated feet that hold fast under impact, and create a flat surface for upright stability. It is carried by a double-layered, soft-grip, solid-core handle, lightweight retractable, telescoping handle and rugged in-line wheels.\u003c\/li\u003e\r\n\u003cli\u003eThis case has an empty interior.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44580124066069,"sku":"IM2750YNF","price":689.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1479660319_img_711369_1.jpg?v=1680256999"},{"product_id":"go-professional-cases-hard-case-for-dji-matrice-600-pro","title":"Go Professional Cases Hard Case for DJI Matrice 600 Pro","description":"\u003cp\u003eThe \u003cstrong\u003eGo Professional Cases Hard Case\u003c\/strong\u003e for \u003cstrong\u003eDJI Matrice 600 Pro\u003c\/strong\u003e is a watertight resin case with custom foam interior to fit not only the drone, but the Ronin-MX gimbal while attached to the aircraft as well as a typical assortment of accessories. This includes two controllers, 18 total flight batteries, four Ronin-MX batteries, chargers, tablets\/monitors, and more.\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eCompact design for easy portability (landing gear must be detached for storage)\u003c\/li\u003e\r\n\t\u003cli\u003eWater-jet precision cut with closed cell foam to resist water and dust infiltration\u003c\/li\u003e\r\n\t\u003cli\u003ePadlock holes include stainless steel padlock protector clips\u003c\/li\u003e\r\n\t\u003cli\u003eWaterproof and dust-tight design\u003c\/li\u003e\r\n\t\u003cli\u003eMolded-in hinge for added protection\u003c\/li\u003e\r\n\t\u003cli\u003eAmbient pressure equalization valve\u003cbr\u003e\r\n\t \u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":44580165910805,"sku":"GPC-DJIM600PRO-1","price":3628.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1_407_24.jpg?v=1680258247"},{"product_id":"think-tank-photo-essentials-convertible-rolling-backpack","title":"Think Tank Photo Essentials Convertible Rolling Backpack","description":"\u003cp\u003eSafely transport your valuable equipment whether your job takes you across town, the continent, or an ocean with the Think Tank Photo Essentials Convertible Rolling Backpack.\u003c\/p\u003e\r\n\u003cp\u003eInspired by the ubiquitous carry-on style rolling luggage but designed with convenience in mind, you can carry the bag four ways: by one of the three carrying handles arrayed around the sides, pull it behind you on the two wheels by the extendable handle, or wear it with the backpack straps that stow in the bag when not in use. The bag's versatility extends to organization and included are a large padded interior with a set of adjustable and removable dividers, internal mesh pockets, external gear pockets, a 16\" padded laptop pocket, and straps for a tripod or monopod. A small side pocket holds a security cable attached to a combination lock so you can lock the zippers to the main compartment or attach the cable to a pole or chair and protect your bag against grab-and-run theft. Also included with the bag is a waterproof rain fly.\u003c\/p\u003e\r\n\u003cp\u003eThis bag is useful for professionals of all kinds including photographers and videographers, audio and sound engineers, and even drone pilots.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eExterior\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAbrasion-resistant YKK RC Fuse two-way lockable zippers\u003c\/li\u003e\r\n\u003cli\u003eSecurity cable and lock allow you to lock the main zipper or attach the bag to a pole or chair and guard against theft\u003c\/li\u003e\r\n\u003cli\u003eDeep front pocket has an organizer to hold small personal items and a padded slip portion for 16\" laptops with easy access for working on the go or to get quickly through TSA checkpoints\u003c\/li\u003e\r\n\u003cli\u003eTripod\/monopod retention strap system on the side\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInterior\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions: 12.2 x 16.5 x 5.9\"\u003c\/li\u003e\r\n\u003cli\u003eRoomy and fully customizable interior can hold multiple camera bodies with attached lenses, plus additional lenses, flashes, drives, and other accessories\u003c\/li\u003e\r\n\u003cli\u003eLarge zippered opening on three sides for maximum access to the interior\u003c\/li\u003e\r\n\u003cli\u003ePadded 210D nylon lining protects valuable and delicate gear\u003c\/li\u003e\r\n\u003cli\u003e \u003c\/li\u003e\r\n\u003cli\u003eLight silver-toned interior makes finding the right gear easy\u003c\/li\u003e\r\n\u003cli\u003eClosed-cell foam and PE board reinforced dividers are adjustable and removable so you can customize the compartment to your needs\u003c\/li\u003e\r\n\u003cli\u003eTwo zippered mesh pockets are useful for accessories like cables and chargers, with the ability to easily see what's inside\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eCarrying Options\u003c\/strong\u003e\u003cbr\u003eSoft, padded top and side carry handles\u003cbr\u003eRigid support on the bottom can be used as a handle\u003cbr\u003eTwo 80mm low-profile silent-rolling wheels\u003cbr\u003e4-stage retractable pull handle accommodates users of all heights\u003cbr\u003eAdjustable backpack straps stow in the back support system when not needed—eliminating hanging or dragging straps\u003cbr\u003eConstruction\u003cbr\u003eMade of tear- and rip-resistant 1680D ballistic nylon\u003cbr\u003eDWR water-resistant and polyurethane coatings keep out water to protect contents and make cleaning easier\u003cbr\u003eUser-replaceable retractable handle, wheels, wheel housings, and feet extend product life\u003cbr\u003eHypalon-reinforced rear panel for increased durability\u003cbr\u003eSeam-sealed rain cover included for added protection against heavy rain or for extra security in crowded areas where pickpockets are active\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Think Tank","offers":[{"title":"Default Title","offer_id":44580179345685,"sku":"TT730511","price":575.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1603883890_img_1437042.jpg?v=1680258467"},{"product_id":"xlite-roller-case-xxl","title":"Xlite Roller Case XXL","description":"\u003cp\u003eThe Xlite Roller Case XXL is designed to carry tripods, light stands, umbrellas, collapsible light modifiers, reflectors \u0026amp; other accessories up to 108cm in length\u003c\/p\u003e","brand":"Xlite","offers":[{"title":"Default Title","offer_id":44580420190485,"sku":"5-0090","price":225.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/41j75_jc0ul._ac.jpg?v=1680264402"},{"product_id":"think-tank-photo-production-manager-50-v2-rolling-gear-case","title":"Think Tank Photo Production Manager 50 V2 Rolling Gear Case","description":"\u003cp\u003eBuilding on the success of the previous model, the \u003cstrong\u003eThink Tank Photo Production Manager 50 V2 Rolling Gear\u003c\/strong\u003e Case gets multiple upgrades while trimming pounds off the weight. The case is thoughtfully designed to address the needs of production crews who require tough and portable cases to carry their larger gear to and from locations. The case allows you to clearly identify the contents, quickly load and unload them hassle free, and hold up to daily use and abuse. From the reinforced ballistic nylon to the shock-absorbing wheels to the large customizable padded interior, this latest version of the Production Manager 50 is built to work as hard as your crew does.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInterior\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions: 15.6 x 49.2 x 10\"\u003c\/li\u003e\r\n\u003cli\u003eHolds three to four flash heads, two to three power packs, monoblocks, umbrellas, large softboxes or collapsed modifiers, large light stands including C-stands\u003c\/li\u003e\r\n\u003cli\u003eMultiple see-through zippered organizer pockets on lid interior for cables, cords, gels, tape, batteries, and more\u003c\/li\u003e\r\n\u003cli\u003ePadded lining protects gear from impacts\u003c\/li\u003e\r\n\u003cli\u003eSet of long and short dividers allow for customized storage and organization of gear, or you can remove them for full interior access\u003c\/li\u003e\r\n\u003cli\u003eAdjustable and removable lid straps keep bag open and accessible\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eExterior\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eBallistic nylon exterior is resistant to rips, tears, punctures, and water\u003c\/li\u003e\r\n\u003cli\u003eReinforced plastic \"armor\" plating and skid rails improve wear resistance at vulnerable points\u003c\/li\u003e\r\n\u003cli\u003eZippered access to main compartment wraps around on three sides for full interior access\u003c\/li\u003e\r\n\u003cli\u003eLarge zippered pocket on front of the lid for reflectors, umbrellas, extension cords, cables, etc.\u003c\/li\u003e\r\n\u003cli\u003eBallistic nylon slip pocket with ladder lock tightener and retention straps for light stands or tripods\u003c\/li\u003e\r\n\u003cli\u003eCustomizable ID panels show the contents at a glance on the top and side of the bag\u003c\/li\u003e\r\n\u003cli\u003eIncluded security cable and combination lock allows you to lock the zipper on the main compartment and secure the bag to a fixed object\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCarrying \u0026amp; Transport\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLarge padded handles on the front and sides provide easy carrying and lifting by one or two people\u003c\/li\u003e\r\n\u003cli\u003eLarge smooth-rolling wheels are set wide apart for stability with shock absorption\u003c\/li\u003e\r\n\u003cli\u003eWeighs 26 pounds\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Think Tank","offers":[{"title":"Default Title","offer_id":44580511318293,"sku":"TT730566","price":1399.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1614901761_1621975.jpg?v=1680265896"},{"product_id":"pelican-1606-wheeled-air-case-with-foam-black","title":"Pelican 1606 Wheeled Air Case with Foam (Black)","description":"\u003cp\u003eStore, transport, and protect your gear with the black Pelican 1606 Wheeled Air Case with Foam. This watertight and dustproof case features a built-in purge valve and ultra-high-impact copolymer construction. Carry the case with the large top handle or roll it with the telescoping handle and built-in wheels.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44580573643029,"sku":"1606AIRB","price":699.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1574788582_img_1282537_1.jpg?v=1680268137"},{"product_id":"pelican-1555airwf-hard-carry-case-with-foam-insert-and-liner-black","title":"Pelican 1555AirWF Hard Carry Case with Foam Insert and Liner (Black)","description":"\u003cp\u003eBuilt for strength and portability, the black Pelican 1555AirNF Hard Carry Case is designed to be dustproof, fully watertight, and crushproof to protect your valuable gear against the harshest handling, shipping, and environmental conditions on the planet. This edition of the 1555Air comes lined, but without foam or other inserts, allowing you the freedom to completely customize the 23 x 12.75 x 7.5\" interior to your specific needs and to your specific gear.\u003c\/p\u003e\r\n\u003cp\u003eYour case is made from a super-light proprietary HPX2 polymer, with honeycomb structural elements, so it's up to 40% lighter than most other Pelican polymers It has newly designed dual push-button latches that provide ease-of-use versus previous iterations. Case design features include an O-ring that seals it to an IP67-rating to be dust and waterproof, dual 5\/16\" (8mm) diameter stainless steel reinforced padlock holes, and a pressure relief valve. This valve regulates the internal pressure, keeping your gear and the case from getting crushed and allowing you to open the case without having to break a tough pressurized seal that may develop. A polycarbonate card holder may be placed on the front or side of the case.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44580573675797,"sku":"1555AIRBG2","price":529.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1601041685_img_1424319.jpg?v=1680268150"},{"product_id":"pgytech-safety-carrying-case-for-dji-mavic-air-2-2s","title":"PGYTECH Safety Carrying Case for DJI Mavic Air 2 \u0026 2S","description":"\u003cp\u003eProtect and transport your drone and essential accessories with this Safety Carrying Case for DJI Mavic Air 2 \/ Air 2S from PGYTECH. The case interior features an EVA shockproof foam lining that has been custom cut with compartments for a Mavic Air 2 or Air 2S drone, two flight batteries, a smart controller, and more. The interior of the lid is also lined with foam for additional internal protection.\u003c\/p\u003e\r\n\u003cp\u003eExternally, the rugged hard-shell case is made to withstand damage from impacts and the elements. The case has an IP67 waterproof rating and internal components can survive being submerged in up to 3.3' of water. The shell is also corrosion proof and capable of withstanding temperatures from 10° to 140° F under normal conditions. Additional features include a pressure balanced valve, tamper-resistant latches, a convenient carry handle, and more.\u003c\/p\u003e","brand":"PGYTECH","offers":[{"title":"Default Title","offer_id":44580582981909,"sku":"PGY-16A-037","price":199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1588784788_1560230.jpg?v=1680268602"},{"product_id":"pgytech-safety-carrying-case-for-dji-mavic-2-smart-controller","title":"PGYTECH Safety Carrying Case for DJI Mavic 2 \u0026 Smart Controller","description":"\u003cp\u003eDesigned highly protective inside and out, the PGYTECH Safety Carrying Case for DJI Mavic 2 \u0026amp; Smart Controller securely packs the drone, controller, four batteries, charger, charger hub, propellers, filter sets, and associated drone\/controller accessories. The case features plastic shockproof lining, a stainless steel reinforced padlock, and a waterproof and breathable pressure balance valve that balances altitude and temperature changes caused by differences between internal and external pressures. The case is suitable for -13 to 194°F conditions.\u003c\/p\u003e","brand":"PGYTECH","offers":[{"title":"Default Title","offer_id":44580584423701,"sku":"PGY-HA-033","price":149.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1552494918_1463683.jpg?v=1680268615"},{"product_id":"autel-robotics-hard-rugged-case-for-evo-ii","title":"Autel Robotics Hard Rugged Case for EVO II","description":"\u003cp\u003eTake your EVO II to harsher environments with the \u003cstrong\u003eHard Rugged Case \u003c\/strong\u003efor \u003cstrong\u003eEVO II\u003c\/strong\u003e from \u003cstrong\u003eAutel Robotics\u003c\/strong\u003e. Engineered to protect your EVO II and accessories from the elements, this rugged IP67-rated case features a hard exterior shell, built-in automatic pressure equalisation valve, and an O-ring gasket to keep everything inside protected from water and dust. Speaking of the interior, you get dual-level, precision-cut foam inserts from GPC. Each compartment of the insert is specifically designed to hold the EVO II drone, a camera payload, controller, batteries, and more.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInterior Compatibility\u003c\/strong\u003e\u003cbr\u003eThe two precision-cut foam inserts provide custom compartments for the following items:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eEVO II drone\u003c\/li\u003e\r\n\u003cli\u003eCamera payload\u003c\/li\u003e\r\n\u003cli\u003eRemote controller\u003c\/li\u003e\r\n\u003cli\u003eBatteries\u003c\/li\u003e\r\n\u003cli\u003eCharging equipment\u003c\/li\u003e\r\n\u003cli\u003eExtra propellers\u003c\/li\u003e\r\n\u003cli\u003eAdditional accessories\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCarry-On Compatible\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWhile strong and rugged, this case is made to be small enough to be taken onto planes as a piece of carry-on luggage.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"AUTEL","offers":[{"title":"Default Title","offer_id":44580682072341,"sku":"ATLEVOV2-04","price":147.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/2_295_22.jpg?v=1680272514"},{"product_id":"tenba-roadie-air-case-roller-21","title":"Tenba Roadie Air Case Roller 21","description":"\u003cp\u003eThe Roadie Air Case Roller 21 from Tenba is a rolling camera case that is designed to be stylish, meet the carry-on requirements for most international as well as US airlines, and is built from ultra-durable, shock-absorbing components. Should the need arise, the Roadie Air Case Roller 21 and its contents can be safely shipped or checked-in at the airport. Crafted using a thoughtful design and minimal branding, this case also features a distinctive appearance without drawing unwanted attention to the equipment inside.\u003c\/p\u003e\r\n\u003cp\u003eA large, main compartment with adjustable dividers can hold a complete kit for many photographers, while the interior of the main compartment lid features four, clear mesh panels for easy identification of their contents. The Roadie Air Case Roller 21 can fit two, gripped DSLR camera bodies with a 400mm f\/2.8 lens or eight to ten smaller lenses, along with flashes and accessories.\u003c\/p\u003e\r\n\u003cp\u003eTogether with the adjustable dividers, a removable insert is provided that can also help partition equipment inside the Roadie Air Case Roller 21. Upon reaching one's destination, the insert is transferable to a separate shoulder bag or backpack to further cushion a camera, plus two to three lenses for on-the-go use. When used with a separately-available Tenba Tools Packlite Travel Bag for BYOB 10, the removable insert installs with a precise fit.\u003c\/p\u003e\r\n\u003cp\u003eFour handles are included for flexibility while transporting or moving the case, a two-stage telescoping top handle, a leather-trimmed non-telescoping top handle, a side handle, and a bottom handle that makes it easier to pick up and place the case into airplane overhead bins or into car trunks. Additionally, an integrated add-a-bag strap consolidates other luggage along the front of the case for easy transport of multiple carry-ons through airports, hotels, or parking lots.\u003c\/p\u003e\r\n\u003cp\u003eFor peace-of-mind in crowded settings, a built-in TSA-approved combination lock secures the main compartment zipper. To chain the case to an immovable object such as a pole, an integrated, braided-steel side cable is included along with an additional TSA-approved combination lock.\u003c\/p\u003e\r\n\u003cp\u003eNylon construction throughout provides the bag with a high degree of weather resistance and enhances its durability, which is further complemented by wheel housings that help protect the reinforced corners of the case from impacts to escalators and curbs. A rain cover is included for even more protection from the elements when needed, and if they wear out over time, the wheels, wheel housings, foot stands, and telescoping top handle are user-replaceable.\u003c\/p\u003e\r\n\u003cp\u003eTenba Air Cases feature a multi-layered skeleton of air-channeled plastic panels, high-density foam, molded framing components, and a reinforced outer shell. They are strong enough to stand on, even when empty, and are built to meet or exceed Air Transport Association shipping standards.\u003c\/p\u003e","brand":"Tenba","offers":[{"title":"Default Title","offer_id":44580732240149,"sku":"638715","price":629.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1496274800_1338094.jpg?v=1680273603"},{"product_id":"pelican-1015-micro-case-solid-black","title":"Pelican 1015 Micro Case (Solid Black)","description":"\u003cp\u003eThe Pelican 1015 Micro Case (Solid Black) is a water-resistant, crushproof, and dust proof Copolymer polycarbonate case with a rubber liner for extra protection that doubles as an o-ring seal. It is designed to carry small portable electronics such as, cameras and cell phones. It can be carried by a removable active sport carabiner that secures the case to a backpack or belt loop.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44581294309653,"sku":"1015BWB","price":79.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1545668781_661179.jpg?v=1680278825"},{"product_id":"pelican-1020-micro-case-solid-black","title":"Pelican 1020 Micro Case (Solid Black)","description":"\u003cp\u003eThe \u003cstrong\u003ePelican 1020 Micro Case\u003c\/strong\u003e (Solid Black with Black Lining) is a water-resistant, crushproof, and dust-proof case made to carry small valuable items. It is made of copolymer, which makes it extremely strong and durable. It has a rubber liner for extra protection, which doubles as an o-ring seal. The case has an Automatic Pressure Equalization Valve that balances interior pressure and keeps water out. Includes lanyard to carry the case.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44581295390997,"sku":"1020BWB","price":79.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1271160957_257851.jpg?v=1680278834"},{"product_id":"pelican-1030-micro-case-clear-yellow-with-colored-lining","title":"Pelican 1030 Micro Case (Clear Yellow with Colored Lining)","description":"\u003cp\u003eThe \u003cstrong\u003ePelican 1030 Micro Case\u003c\/strong\u003e (Clear Yellow with Colored Lining) is made to protect small electronics and valuables. It is watertight, crushproof and has a clear automatic pressure purge valve. The 1030 Micro case has a matching speed lock and liner. It includes a carabiner clip for easy attachment.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44581298209045,"sku":"1030CWY","price":79.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1271162756_257866.jpg?v=1680278843"},{"product_id":"pelican-1050-clear-micro-case-black","title":"Pelican 1050 Clear Micro Case (Black)","description":"\u003cp\u003eThe \u003cstrong\u003ePelican 1050 Clear Micro Case Black\u003c\/strong\u003e is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case. It is made of copolymer and has a matching liner. The case has a speed lock and a clear purge cap. A lanyard for carrying is included.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44581300961557,"sku":"1050BWB","price":79.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1271169928_257883_1.jpg?v=1680278852"},{"product_id":"pelican-1050-clear-micro-case-blue","title":"Pelican 1050 Clear Micro Case (Blue)","description":"\u003cp\u003eThe Pelican 1050 Clear Micro Case Blue is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case. It is made of copolymer and has a matching liner. The case has a speed lock and a clear purge cap. A lanyard for carrying is included.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44581302337813,"sku":"1050CWBL","price":79.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1366735738_257884.jpg?v=1680278861"},{"product_id":"pelican-1060-solid-micro-case-black","title":"Pelican 1060 Solid Micro Case (Black)","description":"\u003cp\u003eThe \u003cstrong\u003ePelican 1060 Solid Micro Case (Black)\u003c\/strong\u003e is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof case. It is made of copolymer and has a matching liner. The case has a speed lock, clear purge cap. The case can be attached to a belt or a strap using the included carabiner.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default Title","offer_id":44581307646229,"sku":"1060BWB","price":89.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1280852287_257892.jpg?v=1680278872"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/collections\/V319481.tag.0.png?v=1765636690","url":"https:\/\/www.cameraelectronic.live\/collections\/bags-cases-hard-cases.oembed","provider":"Camera Electronic","version":"1.0","type":"link"}